Cannot Add Network Printer, Error 0x00000002
Sep 27, 2012
I have a small problem at work with my new printer. I have 11 computers in a classroom, the printer is connected to the teacher's computer (mine, named DELL00). However, I am unable to add the printer on any other computer in classroom, usually with error 0x00000002
All computers have admin account named Teacher, and all except the Teacher's computer have one standard account named Student. Adding the printer on admin account went without single problem on every computer, but the pinter does not show on the Student account. When I try to add the printer from Student account, I get error 0x00000002
I am adding the printer through Devices & Printers -> Add Printer -> Network Printer -> Not in list -> \DELL00LaserJet-P1102. This method worked on the admin account without problem,s but not on the student account.
View 3 Replies
ADVERTISEMENT
Aug 15, 2012
I have two computers I want to connect to a network printer. The printer is a Konica Minolta. When I try to connect it to these computers I get:windows cannot connect to the printer operation failed with error 0x00000002 Both computers are windows 7 and previously were connected to the printer. I had to reinstall the OS on both machines thus the reason Im reconnecting the printer to them. The computers are attached to our domain. Other computers in the office are able to connect to and use this printer.
View 1 Replies
View Related
Nov 29, 2009
I have a Desktop computer with Windows 7 (32 bit) and a laptop with Windows 7 (64 bit). I'm trying to set up a network printer, so I can print from my laptop using my desktop computeer printer. I've set up my wireless computer which uses Windows Xp just fine, and can print from that computer. But when I try to add a network printer on my laptop, as it's finishing installation, an error message pops up saying "cannot connect to printer" error code 0x0000000d. Any feedback would be greatly appreciated. Is it possible to set up a 64 bit with a 32 bit computer?
View 3 Replies
View Related
Sep 26, 2012
And also complicated, 'cos not even my CISCO Network teacher has been able to give me a solution. I think I need some smart people here The thing is that I can't share my printer (connected by USB to my PC) with my laptop on another room, over the local network (in Windows 7 the name is Home Group).The printer model is not relevant because time ago I was able to do what I'm trying now.All my configurations are OK, at least the basic ones, because there's definetely something wrong with my PC, and here's why: if I take my laptop and put it next to the printer and connect it to it (by the same USB cable), I can access the printer with my PC, while it's been shared by the laptop.That proves that the internal network is fine. Also, all the configurations of the printer and also of the home group are literally same in both PCs, the big one and the laptop.
Both PCs run Windows 7. I have tried this, Connect to printer error - Microsoft Windows Vista Community Forums - Vistaheads, but it didn't work.The printer is also properly installed on my PC, it is not a driver problem or something like that.My AV is ESET ESSBE 4, but I don't think it's related, because I have tried deactivating its firewall, and also, on the laptop the AV is the same and theprinter did work.The services are also equal in both PC's now. I have even tried changing the network adaptor on my PC (from Ethernet to Wifi). Nothing.I recently had problems with the home group, but they are solved by now. I guess the source of the problems is the same, but I don't know where else to look.
View 5 Replies
View Related
Mar 11, 2012
I have a Kodak ESP 5250 printer attached to an XP machine - and have a Windows 7 machine that functions well on the network with the XP machine otherwise, but when I attempt to add a network printer to the Windows 7 machine (the printer is the Kodak mentioned above) I receive the error message above 0x0000000d.
View 1 Replies
View Related
Dec 18, 2012
I bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies
View Related
Jul 8, 2011
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
Mar 18, 2010
We have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies
View Related
Aug 11, 2010
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
View 1 Replies
View Related
Dec 10, 2011
I was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies
View Related
Nov 30, 2011
I put a new win7pro pc on line. I want to connect to a brother printer on the network connected to a xp pro sp3 machine. I can see it in active dir. but comes back .inf file not found. I tried local install \\machinename\printername,I downloaded drivers six ways from Sunday,I tried everything I could find to try.It either comes back cannot find network or .inf not found.
View 1 Replies
View Related
Sep 9, 2011
I using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
View 1 Replies
View Related
Jan 23, 2009
I have installed Win 7 a while ago and today needed to print to my upstairs printer. My printer is a HP Deskjest 340 and it is connected to an iMac. I have all comps networked together so when i click add a printer my HP shows up as connected to my mac, no problem there. When i select the printer it starts to install a driver for it but a message comes up that says "No driver found" it asks me if i want to search for a driver on my comp but i don't have one to begin with. So basically I'm stuck. i have been to HPs website about there drivers and such and they don't have any drivers for Vista, they say the comp will look and find one for you while it did properly.
View 9 Replies
View Related
Oct 4, 2009
I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies
View Related
Aug 17, 2012
I'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies
View Related
Jan 29, 2011
Originally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies
View Related
Apr 1, 2012
I am connected to a network through a router and the printer I use is connected directly to another computer. On initial boot up my computer shows the printer under "devices and printers" and I can print. However over time, the printer disappears from "devices and printers" and the only thing I can do is re-boot to get the printer back. How do I stop the computer from loosing the printer?
View 2 Replies
View Related
Jul 22, 2012
I have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies
View Related
Nov 10, 2009
I have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
View 5 Replies
View Related
Dec 28, 2009
Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router.
Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer.
Went back to XP where the printer works and found it is currently working with IPX protocol.
Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
View 9 Replies
View Related
May 10, 2009
We use a HP932c printer as our network printer but no other computers on our network can see it. Everything is set for sharing on Windows 7 and on the other computers which are running XP and Vista. Anyone have a clue why I cannot get the other computers to see the network printer. Also Windows 7's network map doesn't see any of the other computers on our network. When our dual boot computer(Vista/Windows 7) is in Vista mode all is fine but when I boot into Windows 7 it doen't see the other computers and visa versa..
View 2 Replies
View Related
Aug 8, 2011
I used an epson workforce 600 on a prior network. I changed providers and have created a new network. I cannot get the network to see the printer when I run the software. I am using windows 7.
View 1 Replies
View Related
Sep 9, 2011
I bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies
View Related
Jan 6, 2012
I we have a wireless network. all systems have xp windows. we have a printer hp laserjet 1320 that is installed on PC 1. i have a laptop connceted to that wireless network. i want to add the printer that is intsalled on PC 1. when i go to add printer, a list appear, i select the pc and go to add, but it ask for driver, when i put cd of the drivers, it dont find the driver and it shows me a message the "windows cant find the printer"
View 1 Replies
View Related
Feb 9, 2013
configure a network printer to a pc
View 1 Replies
View Related
Jan 19, 2009
I have a HP1315 printer which is shared on an XP box on our home network. I've added the printer but nothing prints - it spools and disappears. Printer works fine from the XP machines on the network therefore assume it's something related to my Windows 7 installation
View 9 Replies
View Related
Jun 26, 2011
I have a desktop computer. I have an older Epson printer attached to the parallel port. I also have a USB Canon Pixma IP4000 printer attached to the desktop..I have 3 other laptop computers which connect wirelessly. The desktop and 2 of the laptops connect fine to the Epson and the Canon printers. These are all XP.But my newest computer is a W7 computer. It recognizes the Epson and works fine with that.How do I get it to see and use the Canon printer (I think it used to work with it). When I try and add a printer and specifiy network printers it does not find the Canon.
View 1 Replies
View Related
Nov 8, 2009
I have a canon mp480 and I'm trying to set up the printer so I can print wireless like I had on my old vista op system but it seems canon mp480 does not support win 7. Does anyone know where I can get a driver for this to rectify this problem.
Look forward to your response.
View 3 Replies
View Related
May 1, 2009
in all builds up to and including 7077 my Canon MX700 network printer was recognized and worked like a charm, including the scanner etc.
Now on a clean install of the RC (build 7100) the Canon network scanning utility comes up with a message saying it has known problems and to contact Canon.
I have tried it in all compatibility modes, administrator, the latest Vista drivers etc from Canon. I did manage to get it installed and it can see the printer but it will not allocate a port for it. When I try to allocate the port it will not work.
Canon do not have any way to contact them other than by phone (good one Canon) and I really have not had the time to sit on the end of a phone wating for them to tell me Windows 7 is not supported.
Oh...this is in x32 and x64 I have tried both but back on x32 for the moment.
I might try the long way....by reinstalling 7077 and then upgrading to 7100 but that is a bit extreme.
Anyone else had similar problems and solved them or do I just have to wait patiently for Canon?
View 9 Replies
View Related
Oct 7, 2012
Printer will not print. HP laptop Pavilion G7 and HP 7210 all in one printer home network. It keeps reporting printer off line. Contact administrator. I am the administrator. I changed the wire, replugged the computer and printer, contacted " system not communicting" What do I do?
View 1 Replies
View Related
