I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies
i have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
plz send me tvs dot matrix printer driver.
View 1 Replies View Relatedi have TVS MSP 250 Champion dot matrix printer.tell me where i get its driver for window7 on laptop ?
View 1 Replies View Relatedi want driver msp250 champion tvs printer
View 1 Replies View RelatedApplication is developed on XP, hosted on win7. I want to print 8.5" x 5.5" page on dot matrix printer (Epson LX 300+ II). It's printing on xp without any problem. Even though I set default printer, created custome paper size, in win7, its not printing, by default taking Latter size
View 4 Replies View Relatedi want to print 2400mmX1520mm by lx300+ printer (by tractor feeder) on windows 7.
View 2 Replies View Relatedim looking for panasonic kx-p1121 win 7 driver.
its connected to my pc using LPT printer port.
I will soon be buying a few new computers for the small business I work for. We are looking to get top-of-the-line computers that will last us another 10 years or so, so I'd like to go with Windows 7 64-bit Professional.
We were at first a bit concerned, though, that the main program we use, DataEase for DOS (yes, I know it's antiquated, lol) wouldn't work, but we've been told it should work fine through a Virtual PC emulated environment running WinXP.
What concerns us now, though, is whether or not we will be able to continue using our old Fujitsu DL4600 dot-matrix printers. We need these printers for printing on three-part paper to get signatures and such.
I'm quite sure there is no 64-bit driver available for these printers, but since we are going to be running XP through Virtual PC - will we be able to print to these printers through that emulated environment?
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies View RelatedWe have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View RelatedI'm trying to download the latest Intel Matrix Storage Manager. I'm using Windows 7 HP 64 Bit. I went to Intel and downloaded the one I thought was for my operating system but when I tried to install it I was told that my OS was not the right one for that download.
View 1 Replies View RelatedI am using an Asus x58 P6TDeluxe and running Windows 7 x64 OEM. I have tried installing the chipset driver and intel matrix storage manager driver (to get SAS working) but both say "Does not support this operating system WNT_6.0P_64_MCE" and "This computer does not meet the minimum requirements for installing this software. Setup will exit".
Tried using 32,64, vista, 7, everything.
Can somebody shine some light on my situation?
I installed yesterday my new Windows 7 32bits i put it on my new Intel 160gb gen 2 with 02HD firmware and started installing drivers.
I installed Intel SSD Toolbox - v1.2 just for curiosity because i know i didn´t need it for trim, i read agood part of the manual (requirements and similar stuff) and i thought i was ready to install the Intel SSD Toolbox - v1.2. AFTER other stuff i decided to see a little more of the toolbox manual and I FOUND IN PAG 13!!!!!!! THAT ONE SHOULDN´T INSTALL matrix storage driver BECAUSE THEN ONE REALLY NEED TO USE THE TOOLBOX for trim!!!!!!!! IT SAYS THIS IN THE Schedule SECTION!!! (INSTED IN THE BEGIN WITH EG THE TITULE I M P O R T A N T):
6. If your PC uses Microsoft Windows 7 and the Intel Matrix Storage Manager version 8.x (which can be used in place of the Microsoft AHCI driver), then the Intel SSD Optimizer tool is required to enable the ATA Data Set Management Command (Trim).
NOW I LOST LOTS OFF HOURS AROUND THESE, INSTED OF EXPLORING MY NEW OS AND SSD ONLY TO FIND THAT althoug i uninstaled this matrix thing I NEED TO REINSTALL THE OS BECAUSE matrix storage driver MANUAL SAYS THAT TO REMOVE THE DRIVER ONE NEEDS TO REINSTALL THE OS!!!!!!!!!
Does someone knows a workround this ANNOYNCE? i have already lots of stuff installed and configurated
i don´t use raid but i want AHCI (I HAVE IT ENABLED IN THE SATA CONFIG IN THE BIOS before the OS install) I cant see Intel(R) SATA AHCI Controller in the 'IDE ATA/ATAPI controllers' entry in device manager but i see this:
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
After completing the Windows 7 64 bit install, the screen goes black with a white blinking cursor. After rebooting the screen freezes at the �Starting Windows� screen which should proceed with the configuration of the Windows 7 install (select computer & user name, etc.) Before the �Starting Windows� screen there is the following message: �Boot from AHCI CD-ROM� or something similar. This was not present when XP was running successfully. Throughout this process I ran into a BSOD which mentioned iaStorV.sys which apparently relates to the Intel Matrix Storage Manager as explained here.
Action Taken:
-I tried repairing the windows installation using the Windows 7 DVD, but it could not find anything.
-I tried booting into safe mode, but it said Windows needs to install first.
Version Numbers & BIOS Setetings:
ThinkStation S10 6423 CTO
Flash EEPROM Revision Level: 2WKT32AUS
[code]....
I was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies View RelatedI put a new win7pro pc on line. I want to connect to a brother printer on the network connected to a xp pro sp3 machine. I can see it in active dir. but comes back .inf file not found. I tried local install \\machinename\printername,I downloaded drivers six ways from Sunday,I tried everything I could find to try.It either comes back cannot find network or .inf not found.
View 1 Replies View RelatedI using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
View 1 Replies View RelatedI have installed Win 7 a while ago and today needed to print to my upstairs printer. My printer is a HP Deskjest 340 and it is connected to an iMac. I have all comps networked together so when i click add a printer my HP shows up as connected to my mac, no problem there. When i select the printer it starts to install a driver for it but a message comes up that says "No driver found" it asks me if i want to search for a driver on my comp but i don't have one to begin with. So basically I'm stuck. i have been to HPs website about there drivers and such and they don't have any drivers for Vista, they say the comp will look and find one for you while it did properly.
View 9 Replies View RelatedI'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies View RelatedOriginally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies View RelatedI am connected to a network through a router and the printer I use is connected directly to another computer. On initial boot up my computer shows the printer under "devices and printers" and I can print. However over time, the printer disappears from "devices and printers" and the only thing I can do is re-boot to get the printer back. How do I stop the computer from loosing the printer?
View 2 Replies View RelatedI have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies View RelatedI have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router.
Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer.
Went back to XP where the printer works and found it is currently working with IPX protocol.
Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
We use a HP932c printer as our network printer but no other computers on our network can see it. Everything is set for sharing on Windows 7 and on the other computers which are running XP and Vista. Anyone have a clue why I cannot get the other computers to see the network printer. Also Windows 7's network map doesn't see any of the other computers on our network. When our dual boot computer(Vista/Windows 7) is in Vista mode all is fine but when I boot into Windows 7 it doen't see the other computers and visa versa..
View 2 Replies View RelatedI used an epson workforce 600 on a prior network. I changed providers and have created a new network. I cannot get the network to see the printer when I run the software. I am using windows 7.
View 1 Replies View RelatedI bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies View RelatedI we have a wireless network. all systems have xp windows. we have a printer hp laserjet 1320 that is installed on PC 1. i have a laptop connceted to that wireless network. i want to add the printer that is intsalled on PC 1. when i go to add printer, a list appear, i select the pc and go to add, but it ask for driver, when i put cd of the drivers, it dont find the driver and it shows me a message the "windows cant find the printer"
View 1 Replies View Relatedconfigure a network printer to a pc
View 1 Replies View Related
