Tvs Dot Matrix Printer Driver
May 21, 2012plz send me tvs dot matrix printer driver.
View 1 Repliesplz send me tvs dot matrix printer driver.
View 1 Repliesi have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies View Relatedi have TVS MSP 250 Champion dot matrix printer.tell me where i get its driver for window7 on laptop ?
View 1 Replies View Relatedi want driver msp250 champion tvs printer
View 1 Replies View RelatedApplication is developed on XP, hosted on win7. I want to print 8.5" x 5.5" page on dot matrix printer (Epson LX 300+ II). It's printing on xp without any problem. Even though I set default printer, created custome paper size, in win7, its not printing, by default taking Latter size
View 4 Replies View Relatedi want to print 2400mmX1520mm by lx300+ printer (by tractor feeder) on windows 7.
View 2 Replies View Relatedim looking for panasonic kx-p1121 win 7 driver.
its connected to my pc using LPT printer port.
I installed yesterday my new Windows 7 32bits i put it on my new Intel 160gb gen 2 with 02HD firmware and started installing drivers.
I installed Intel SSD Toolbox - v1.2 just for curiosity because i know i didn´t need it for trim, i read agood part of the manual (requirements and similar stuff) and i thought i was ready to install the Intel SSD Toolbox - v1.2. AFTER other stuff i decided to see a little more of the toolbox manual and I FOUND IN PAG 13!!!!!!! THAT ONE SHOULDN´T INSTALL matrix storage driver BECAUSE THEN ONE REALLY NEED TO USE THE TOOLBOX for trim!!!!!!!! IT SAYS THIS IN THE Schedule SECTION!!! (INSTED IN THE BEGIN WITH EG THE TITULE I M P O R T A N T):
6. If your PC uses Microsoft Windows 7 and the Intel Matrix Storage Manager version 8.x (which can be used in place of the Microsoft AHCI driver), then the Intel SSD Optimizer tool is required to enable the ATA Data Set Management Command (Trim).
NOW I LOST LOTS OFF HOURS AROUND THESE, INSTED OF EXPLORING MY NEW OS AND SSD ONLY TO FIND THAT althoug i uninstaled this matrix thing I NEED TO REINSTALL THE OS BECAUSE matrix storage driver MANUAL SAYS THAT TO REMOVE THE DRIVER ONE NEEDS TO REINSTALL THE OS!!!!!!!!!
Does someone knows a workround this ANNOYNCE? i have already lots of stuff installed and configurated
i don´t use raid but i want AHCI (I HAVE IT ENABLED IN THE SATA CONFIG IN THE BIOS before the OS install) I cant see Intel(R) SATA AHCI Controller in the 'IDE ATA/ATAPI controllers' entry in device manager but i see this:
I will soon be buying a few new computers for the small business I work for. We are looking to get top-of-the-line computers that will last us another 10 years or so, so I'd like to go with Windows 7 64-bit Professional.
We were at first a bit concerned, though, that the main program we use, DataEase for DOS (yes, I know it's antiquated, lol) wouldn't work, but we've been told it should work fine through a Virtual PC emulated environment running WinXP.
What concerns us now, though, is whether or not we will be able to continue using our old Fujitsu DL4600 dot-matrix printers. We need these printers for printing on three-part paper to get signatures and such.
I'm quite sure there is no 64-bit driver available for these printers, but since we are going to be running XP through Virtual PC - will we be able to print to these printers through that emulated environment?
I'm trying to download the latest Intel Matrix Storage Manager. I'm using Windows 7 HP 64 Bit. I went to Intel and downloaded the one I thought was for my operating system but when I tried to install it I was told that my OS was not the right one for that download.
View 1 Replies View RelatedI am using an Asus x58 P6TDeluxe and running Windows 7 x64 OEM. I have tried installing the chipset driver and intel matrix storage manager driver (to get SAS working) but both say "Does not support this operating system WNT_6.0P_64_MCE" and "This computer does not meet the minimum requirements for installing this software. Setup will exit".
Tried using 32,64, vista, 7, everything.
Can somebody shine some light on my situation?
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
After completing the Windows 7 64 bit install, the screen goes black with a white blinking cursor. After rebooting the screen freezes at the �Starting Windows� screen which should proceed with the configuration of the Windows 7 install (select computer & user name, etc.) Before the �Starting Windows� screen there is the following message: �Boot from AHCI CD-ROM� or something similar. This was not present when XP was running successfully. Throughout this process I ran into a BSOD which mentioned iaStorV.sys which apparently relates to the Intel Matrix Storage Manager as explained here.
Action Taken:
-I tried repairing the windows installation using the Windows 7 DVD, but it could not find anything.
-I tried booting into safe mode, but it said Windows needs to install first.
Version Numbers & BIOS Setetings:
ThinkStation S10 6423 CTO
Flash EEPROM Revision Level: 2WKT32AUS
[code]....
download in my computer hp laserjet driver P1007
View 1 Replies View Relatedi want to download software and driver for hp laser jet p1007 . I am unable to use my printer.
View 1 Replies View RelatedWindows 7 recognizes the printer but has a yellow triangle exclamation point. it will not print, but I cannot find any printer driver for Windows 7. any ideas?
Answer:-
Are yere any more details on what is the matter with the printer in device manager?
You should be able to download the Windows Vista drivers for that printer from here, which should be compatible with Windows 7:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:549:0:0
find out the correct driver hp laserjet p1007
View 1 Replies View RelatedWe have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View Relatedi have a problem finding lexmark z715 printer driver to download in my window 7 dell computer.
View 3 Replies View Relatedi need a printer driver for hp deskjet 1280 driver for win 7 64 bit
View 1 Replies View RelatedI'm running Windows 7 x86 on a very old laptop with 512mb ram (Toshiba Portege R200), which with a little patience is perfectly usable! However I am unable to install drivers for a HP B11a wifi printer because although I meet the system requirement of 512mb memory, only 503mb is stated as 'usable' I've run memory tests and all is fine so am assuming the 9mb is reserved for the video card or something, but bios options are very limited and I don't seem to have any settings for this. Is there any way to trick windows into thinking it has more memory, or some other ingenious solution I haven't thought of? I tried using ready boost but it must be usb1 because I don't get the option to use it as memory.
View 7 Replies View RelatedI installed windows 7 , it detected the scanner driver for the printer, but it is not able to find the driver for the printer i need help. is anybody using psc 950 on windows 7 ?
Answer:-
Base HP PSC 950:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=34580&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=34579
If you have the XI model:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=34582&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=34579
Answer 2:-
Check the following link:-
http://www.opendrivers.com/driver/211362/hp-psc-950-all-in-one-driver-3.20-for-windows-xp-free-download.html
i need hp 6l printer driver
View 1 Replies View RelatedMy new boss has a 64 bit Windows 7 laptop. We are trying to hook up to a Xerox WorkCentre 128 wirelessly. It connects, but prints only gobbly-goop. When I talked to Xerox they said there are no drivers for the 64 bit Win 7, and changing his computer to Vista, or getting a new printer.
View 5 Replies View RelatedI can download a printer driver for the above printer. It has not installed properly using the printer cd I have been trying to download it by going online but I may as well be chinese,plenty of sites but when I try and download I end up with driver detective or some other useless application which needs to be paid for, I have been to other sites where
View 14 Replies View RelatedI have an HP Laserjet 4L. Windows Vista and XP automatically find the software and install it correctly. Unfortunately, HP drivers are no longer available and HP says the drivers are in XP/Vista and they won't post the software for download. My environment: Home network, the HP printer is attached to a network printer device with an IP address. On my laptop (XP Pro) I have the printer installed and it works great. I was able to share this printer and find it and print to it using Windows 7. Now, since Windows 7 has the drivers and it works fine, I should be able to add a networked printer using the same drivers. But no luck.. When I try, it keeps looking for the INF file to install the drivers, which of course are not available. When I print a Printer Test Page, I see the following (I won't type irrelevant information)
View 6 Replies View RelatedI Have an ALL N ONE HP Printer, Win 7 64 Bit. Due to a Scanner Failure error, I have tried to remove and install the S/W several times . I have deleated everything associated with my HP all in one printer, in Registery, all Temp files, & Add / Rm programs. All thats remaining is a Digital Imaging, Bin file HPSLPSVC64.DLL and action states it cannot be deleted because it is open in HP Network Devices Support. Also after all this when i go into my Network the Printer is still there with no delete option, but under Divicies and Printers it's gone. Can anyone offer any assistance on a CLEAN DELETE of these printer files.
View 6 Replies View Relateddriver for HP PSC 1410 All-in-One Printer, I installed the one in HP's site but its not working properly as I'm unable to use the 1410 at all. I downloaded the Vista(x64) version.
View 1 Replies View RelatedThe driver for my old HP 990cxi printer is not included in Windows 7 Ultimate 64 Bit. When connecting to the Internet Windows checks for newer versions of drivers and with that I was able to get the HP printer working. Where does Windows save the driver package after such an online update? Is there a way to download this package and make the driver update offline afterwards?
View 7 Replies View RelatedI have a HP PSC 2410 Photosmart All-in-One printer but Windows 7 does not install any print driver for the device therefore I can't print. Tried going through the Troubleshoot option and connecting to Windows Update to no avail . Any ideas anyone?
View 7 Replies View Related