Run Fujitsu Dot Matrix Using Virtual PC
Dec 22, 2009
I will soon be buying a few new computers for the small business I work for. We are looking to get top-of-the-line computers that will last us another 10 years or so, so I'd like to go with Windows 7 64-bit Professional.
We were at first a bit concerned, though, that the main program we use, DataEase for DOS (yes, I know it's antiquated, lol) wouldn't work, but we've been told it should work fine through a Virtual PC emulated environment running WinXP.
What concerns us now, though, is whether or not we will be able to continue using our old Fujitsu DL4600 dot-matrix printers. We need these printers for printing on three-part paper to get signatures and such.
I'm quite sure there is no 64-bit driver available for these printers, but since we are going to be running XP through Virtual PC - will we be able to print to these printers through that emulated environment?
View 2 Replies
ADVERTISEMENT
Sep 18, 2012
i have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
View 14 Replies
View Related
Aug 21, 2009
im looking for panasonic kx-p1121 win 7 driver.
its connected to my pc using LPT printer port.
View 2 Replies
View Related
Oct 4, 2009
I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies
View Related
May 21, 2012
plz send me tvs dot matrix printer driver.
View 1 Replies
View Related
Dec 31, 2011
i have TVS MSP 250 Champion dot matrix printer.tell me where i get its driver for window7 on laptop ?
View 1 Replies
View Related
Jan 19, 2013
i want driver msp250 champion tvs printer
View 1 Replies
View Related
Dec 15, 2011
I'm trying to download the latest Intel Matrix Storage Manager. I'm using Windows 7 HP 64 Bit. I went to Intel and downloaded the one I thought was for my operating system but when I tried to install it I was told that my OS was not the right one for that download.
View 1 Replies
View Related
Dec 14, 2012
I upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies
View Related
May 5, 2009
How to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies
View Related
Oct 23, 2009
I am using an Asus x58 P6TDeluxe and running Windows 7 x64 OEM. I have tried installing the chipset driver and intel matrix storage manager driver (to get SAS working) but both say "Does not support this operating system WNT_6.0P_64_MCE" and "This computer does not meet the minimum requirements for installing this software. Setup will exit".
Tried using 32,64, vista, 7, everything.
Can somebody shine some light on my situation?
View 7 Replies
View Related
Jan 2, 2010
I installed yesterday my new Windows 7 32bits i put it on my new Intel 160gb gen 2 with 02HD firmware and started installing drivers.
I installed Intel SSD Toolbox - v1.2 just for curiosity because i know i didn´t need it for trim, i read agood part of the manual (requirements and similar stuff) and i thought i was ready to install the Intel SSD Toolbox - v1.2. AFTER other stuff i decided to see a little more of the toolbox manual and I FOUND IN PAG 13!!!!!!! THAT ONE SHOULDN´T INSTALL matrix storage driver BECAUSE THEN ONE REALLY NEED TO USE THE TOOLBOX for trim!!!!!!!! IT SAYS THIS IN THE Schedule SECTION!!! (INSTED IN THE BEGIN WITH EG THE TITULE I M P O R T A N T):
6. If your PC uses Microsoft Windows 7 and the Intel Matrix Storage Manager version 8.x (which can be used in place of the Microsoft AHCI driver), then the Intel SSD Optimizer tool is required to enable the ATA Data Set Management Command (Trim).
NOW I LOST LOTS OFF HOURS AROUND THESE, INSTED OF EXPLORING MY NEW OS AND SSD ONLY TO FIND THAT althoug i uninstaled this matrix thing I NEED TO REINSTALL THE OS BECAUSE matrix storage driver MANUAL SAYS THAT TO REMOVE THE DRIVER ONE NEEDS TO REINSTALL THE OS!!!!!!!!!
Does someone knows a workround this ANNOYNCE? i have already lots of stuff installed and configurated
i don´t use raid but i want AHCI (I HAVE IT ENABLED IN THE SATA CONFIG IN THE BIOS before the OS install) I cant see Intel(R) SATA AHCI Controller in the 'IDE ATA/ATAPI controllers' entry in device manager but i see this:
View 5 Replies
View Related
Mar 23, 2011
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
View 1 Replies
View Related
Feb 8, 2012
Application is developed on XP, hosted on win7. I want to print 8.5" x 5.5" page on dot matrix printer (Epson LX 300+ II). It's printing on xp without any problem. Even though I set default printer, created custome paper size, in win7, its not printing, by default taking Latter size
View 4 Replies
View Related
Jul 26, 2012
i want to print 2400mmX1520mm by lx300+ printer (by tractor feeder) on windows 7.
View 2 Replies
View Related
Jun 17, 2011
After completing the Windows 7 64 bit install, the screen goes black with a white blinking cursor. After rebooting the screen freezes at the �Starting Windows� screen which should proceed with the configuration of the Windows 7 install (select computer & user name, etc.) Before the �Starting Windows� screen there is the following message: �Boot from AHCI CD-ROM� or something similar. This was not present when XP was running successfully. Throughout this process I ran into a BSOD which mentioned iaStorV.sys which apparently relates to the Intel Matrix Storage Manager as explained here.
Action Taken:
-I tried repairing the windows installation using the Windows 7 DVD, but it could not find anything.
-I tried booting into safe mode, but it said Windows needs to install first.
Version Numbers & BIOS Setetings:
ThinkStation S10 6423 CTO
Flash EEPROM Revision Level: 2WKT32AUS
[code]....
View 7 Replies
View Related
Jul 25, 2010
How to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies
View Related
Jan 31, 2010
How to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies
View Related
May 1, 2009
How to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies
View Related
Sep 6, 2012
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
View 3 Replies
View Related
Jul 13, 2009
I am looking for a 64bit driver for this scanner. Fujitsu tech support has been way less than useless, telling me that they have no plans to do a 64bit driver. Does anybody else have this flatbed scanner? Is there a work around?
View 3 Replies
View Related
Dec 21, 2009
I know it's a Mac scanner, but I'm wondering if anyone ever made a Windows driver for the S510M.
Driver Download Link:
http://www.fujitsu.com/us/services/computing/peripherals/scanners/support/drivers-downloads_index.html
View 4 Replies
View Related
Dec 18, 2009
I need the Network Card driver for Scaleo T so i can at least connect through an Ethernet Cable. Any advice?
View 3 Replies
View Related
Dec 11, 2009
Installed Win 7 ultimate. updated to the latest intel 945 drivers. I have a problem with the graphics resolution.
I have set the screen resolution to SXGA 1400 × 1050. However, when I flip the screen to tablet mode or when I login after suspend, the screen flickers (goes black for a second) and the resolution switches to 1024x768. I have looked in many places for a solution. Problem still persists.
View 1 Replies
View Related
Jan 7, 2010
is my PC 64 bit compatible, at the moment i have a Fujitsu Esprimo E5905 PC running widows XP home edition
View 9 Replies
View Related
Sep 10, 2009
Is there any way I can force 1920 * 1200 (or 1080) resolution, using this hardware: Fujitsu Scaleo L22-1W display and GeForce 9600M GT GPU. Native resolution for this display is 1680 * 1050 at 59 Hz.
I am building a HTPC system using a spare HP Pavilion dv7 laptop, basically the same specs than those I've listed in my system specs. I would like to use it with two displays, the mentioned L22-1W and and a full HD plasma TV from laptops HDMI out, desktop duplicated not extended, laptops own display disconnected because this GPU allows max two displays at the same time.
Problem is this duplicated desktop. This GPU allows a FullHD resolution ONLY when a HDMI device is the only display connected, or when multi display settings are on extended desktop. If I choose duplicate desktop, it allows the HDMI device resolutions only up to the max of that second display, in this case 1680*1050.
If this is not possible, I'll buy a new display with FullHD resolution. I just want first to test if I could make this system from spares I already have.
View 2 Replies
View Related
May 14, 2009
i have installed Windows 7 on this machine to test and it works perfectly except for the sound, Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9 is the only thing wrong when i go into device manager driver upto date, and don't know if this is the problem but, have done some googling for additional drivers but to no avail and fujitsi have no solution, tried the vista solutions still no go. anyone who can point me in right direction which is probably staring me in the face.
View 7 Replies
View Related
Feb 4, 2011
audio and video drivers
View 3 Replies
View Related
May 16, 2011
I bought a Fujitsu P4, 2.66 GHZ, computer. Its memory capacity was 256 MB but i upgraded to 512 GB so that i could load Windows 7. I loaded Windows 7 and after the installation, there was no sound. I re-installed again but still there was no sound
View 3 Replies
View Related
Mar 9, 2012
I've recently acquired a relatively old, yet (wonder)fully functional, Fujitsu P7010D laptop.It's a 1.10GHz Pentium M, with 1 GB of RAM. I'm no expert in computers so let me know if there's something else that is necessary to mention. Basically it's a 7 year old laptop (since 2005), but it runs just fine.A lovely piece of gear. I was trying to install a Home Basic edition of Windows 7 on it with no success.Again and again I encountered a problem that only popped at the end of the installation, upon running Windows for the first time. I got a blue screen during "Starting Windows" (its animation never started by the way, FWIW), saying ( A problem occurred ... If this problem persists ... ) The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS. Technical Information:*** STOP x000000A5 (0x00000011, 0x00000003, 0x00000000, 0x00000000) Well obviously it's about my BIOS, so I downloaded what probably is the latest update from Fujitsu, which seems to be from 2007 (that's the date in the BIOS Info tab). After going through another Windows 7 installation, the same blue screen appeared again, sadly. The original Windows XP Professional edition does work completely fine, so is another "Windows Seven Royal XP SP3" that I downloaded from the internet. I only get the error when trying to install Win 7. Another thing to mention is, I could load Windows 7 on safe mode (hitting F8 during boot up), everything was functional there when I was messing with settings and USB / SD (Secure Digital) devices. No blue screen at that time. Tried to put it all simply and accurate, I'd love to get some help with thatI use it in my studies and there's nothing I want more than a comfy workspace on the go everyday and during lectures.
View 4 Replies
View Related
May 5, 2012
the E hard disk drive has been deleted is there anyway of getting it back?
View 1 Replies
View Related
