Tvs Dot-matrix Printer Drivers For Windows 7?
Jan 19, 2013i want driver msp250 champion tvs printer
View 1 Repliesi want driver msp250 champion tvs printer
View 1 Repliesi have TVS MSP 250 Champion dot matrix printer.tell me where i get its driver for window7 on laptop ?
View 1 Replies View RelatedApplication is developed on XP, hosted on win7. I want to print 8.5" x 5.5" page on dot matrix printer (Epson LX 300+ II). It's printing on xp without any problem. Even though I set default printer, created custome paper size, in win7, its not printing, by default taking Latter size
View 4 Replies View Relatedi want to print 2400mmX1520mm by lx300+ printer (by tractor feeder) on windows 7.
View 2 Replies View Relatedi have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies View Relatedplz send me tvs dot matrix printer driver.
View 1 Replies View RelatedAfter completing the Windows 7 64 bit install, the screen goes black with a white blinking cursor. After rebooting the screen freezes at the �Starting Windows� screen which should proceed with the configuration of the Windows 7 install (select computer & user name, etc.) Before the �Starting Windows� screen there is the following message: �Boot from AHCI CD-ROM� or something similar. This was not present when XP was running successfully. Throughout this process I ran into a BSOD which mentioned iaStorV.sys which apparently relates to the Intel Matrix Storage Manager as explained here.
Action Taken:
-I tried repairing the windows installation using the Windows 7 DVD, but it could not find anything.
-I tried booting into safe mode, but it said Windows needs to install first.
Version Numbers & BIOS Setetings:
ThinkStation S10 6423 CTO
Flash EEPROM Revision Level: 2WKT32AUS
[code]....
I am using an Asus x58 P6TDeluxe and running Windows 7 x64 OEM. I have tried installing the chipset driver and intel matrix storage manager driver (to get SAS working) but both say "Does not support this operating system WNT_6.0P_64_MCE" and "This computer does not meet the minimum requirements for installing this software. Setup will exit".
Tried using 32,64, vista, 7, everything.
Can somebody shine some light on my situation?
im looking for panasonic kx-p1121 win 7 driver.
its connected to my pc using LPT printer port.
I will soon be buying a few new computers for the small business I work for. We are looking to get top-of-the-line computers that will last us another 10 years or so, so I'd like to go with Windows 7 64-bit Professional.
We were at first a bit concerned, though, that the main program we use, DataEase for DOS (yes, I know it's antiquated, lol) wouldn't work, but we've been told it should work fine through a Virtual PC emulated environment running WinXP.
What concerns us now, though, is whether or not we will be able to continue using our old Fujitsu DL4600 dot-matrix printers. We need these printers for printing on three-part paper to get signatures and such.
I'm quite sure there is no 64-bit driver available for these printers, but since we are going to be running XP through Virtual PC - will we be able to print to these printers through that emulated environment?
I use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Service. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies View RelatedI'm trying to download the latest Intel Matrix Storage Manager. I'm using Windows 7 HP 64 Bit. I went to Intel and downloaded the one I thought was for my operating system but when I tried to install it I was told that my OS was not the right one for that download.
View 1 Replies View RelatedI installed yesterday my new Windows 7 32bits i put it on my new Intel 160gb gen 2 with 02HD firmware and started installing drivers.
I installed Intel SSD Toolbox - v1.2 just for curiosity because i know i didn´t need it for trim, i read agood part of the manual (requirements and similar stuff) and i thought i was ready to install the Intel SSD Toolbox - v1.2. AFTER other stuff i decided to see a little more of the toolbox manual and I FOUND IN PAG 13!!!!!!! THAT ONE SHOULDN´T INSTALL matrix storage driver BECAUSE THEN ONE REALLY NEED TO USE THE TOOLBOX for trim!!!!!!!! IT SAYS THIS IN THE Schedule SECTION!!! (INSTED IN THE BEGIN WITH EG THE TITULE I M P O R T A N T):
6. If your PC uses Microsoft Windows 7 and the Intel Matrix Storage Manager version 8.x (which can be used in place of the Microsoft AHCI driver), then the Intel SSD Optimizer tool is required to enable the ATA Data Set Management Command (Trim).
NOW I LOST LOTS OFF HOURS AROUND THESE, INSTED OF EXPLORING MY NEW OS AND SSD ONLY TO FIND THAT althoug i uninstaled this matrix thing I NEED TO REINSTALL THE OS BECAUSE matrix storage driver MANUAL SAYS THAT TO REMOVE THE DRIVER ONE NEEDS TO REINSTALL THE OS!!!!!!!!!
Does someone knows a workround this ANNOYNCE? i have already lots of stuff installed and configurated
i don´t use raid but i want AHCI (I HAVE IT ENABLED IN THE SATA CONFIG IN THE BIOS before the OS install) I cant see Intel(R) SATA AHCI Controller in the 'IDE ATA/ATAPI controllers' entry in device manager but i see this:
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
my year old HPphotosmart C4585, all-in-one printer prints pink shaded pictures. new computer running windows 7 ult. 64bit.. do I need new printer drivers or what!?
View 3 Replies View RelatedI purchased a new laptop with Windows 7 and I need a 64 bit print driver for a Canon D880..ImageClass copier/printer
View 3 Replies View RelatedI am looking for assistance for my daughter on an older HP Printer model HP630C with paralle portonly and has been running on Windows XP 32 bit for years. She now has a new HP Windows 7 laptop running 64 bit and printer won't work. Is there a Windows 7 64 bit or Windows XP 64 bit driver somewhere for this printer?
View 8 Replies View RelatedI am looking to connect my old HP Designjet 775cm. I need a driver for it..
View 2 Replies View Relatedim trying to set up my hp550c printer on my wireless network. when i go to add it as a printer on my laptop it needs the drivers which i can not find anywhere. my desktop that the printer is connected to runs windows xp so it is no problem finding the drivers (they are included with the operating system).
View 1 Replies View RelatedI have a hp mod. 1100a printer and i need the cable and software to install it to windows 7 operating program.
View 2 Replies View Relatedi need hp 1300 printer driver?
View 1 Replies View RelatedI have a new laptop with window 7 and a hp 1522nf printer trying to find what diver to install and where to find them
View 6 Replies View RelatedJust upgraded to notebook w windows 7 and cannot find drivers for my C351 printer
View 1 Replies View Relateddrivers for windows 7 for h505 printer
View 3 Replies View Relatedi want to instal printer larerJer6p in window 7?
View 1 Replies View RelatedHp printer 3650 drivers for windows 7?
View 1 Replies View RelatedDoes anyone know where to get the Windows 7 drivers for an HP Deskjet 3650 printer?
View 3 Replies View RelatedMy camera, printer and some CD's won't play on windows 7. Say there is no drivers. Before I had XP and windows Vista and all worked ok. I didn't want 7 but they gave it to me anyway.
View 1 Replies View Relatedhp laserjet 1100 for windows 7 32 bit
View 1 Replies View Relatedinstall Canon 2900 printer drivers for windows 7 x64.
View 1 Replies View Related