I put a new win7pro pc on line. I want to connect to a brother printer on the network connected to a xp pro sp3 machine. I can see it in active dir. but comes back .inf file not found. I tried local install \\machinename\printername,I downloaded drivers six ways from Sunday,I tried everything I could find to try.It either comes back cannot find network or .inf not found.
View 1 Replies
I have a Kodak ESP 5250 printer attached to an XP machine - and have a Windows 7 machine that functions well on the network with the XP machine otherwise, but when I attempt to add a network printer to the Windows 7 machine (the printer is the Kodak mentioned above) I receive the error message above 0x0000000d.
View 1 Replies View RelatedI have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View RelatedI tried doing a lot of searching on here and google, but didn't find a resolution. I have a Machine with Windows 7 Alienware x86 hosting a shared network printer. I am able to find and print on a machine with Windows 7 Home Premium x64 with no problem. Both machines belong to the x64 Homegroup. I have a netbook with Windows 7 Starter and find the printer on the network and even try adding it with \hostnameprintername. I find it no problem and drivers install on the netbook, but when I try to print it does nothing. Works great on the other two machines. I also joined the homegroup to see if that will work, but it didn't.
View 3 Replies View Relatedi switched my bosses computer to Windows 7 here at work, all went fine.. we are using win98 under VMWARE 6.5 for our windows 98.. everything works great, except i cannot get it to access the printer on the Windows 7 machine, it sees it but always gets a access denied error, i have turned off password sharing.. and any of the xp/Windows 7 machines see it fine.. just the damn 98.. and i can't not use 98 cause of our POS software...
View 6 Replies View Relatedgetting Canon ir2420 machine printer software?
View 1 Replies View RelatedThe only printer in my network is on a computer running XP, and my 7 laptop needs to connect to it. How do I do this? I already used my XP computer to set up a workgroup, but I can't figure out how to connect to it on 7.
View 2 Replies View RelatedI've got a network with 2 Windows 7 and 2 XP PRO SP3 machines
I can see ALL of them on ALL machines but ONE just refuses whatever I do to allow direct access to it from EITHER of the Windows 7 Machines (build 7137 x-64 )
All firewalls off etc.
same user-id passwords etc etc.
What's up with this one XP machine. Windows 7 Networking never seems to work correctly at times. Never have a problem with SAMBA on 'NIX.
old system was laptop running XP with desktop also running XP. We set up a "shared documents" folder with simple file-sharing on the desktop which the laptop could access when not working out of the office via DSL high-speed router. We just upgraded to a new laptop running 7 Pro and it automatically detected the router and I selected "work network" during setup. I can't even see the desktop on the "new network" dsiplayed on the "new laptop" - do I need to set up a new connection on the XP desktop or what?
View 3 Replies View RelatedI just set up my home network (from scratch) so I could have all my devices in communication with each other. I have 2 PCs running Win 7 x64, an XBOX 360, and one PC with Win XP/SP3. I reset the router and recreated the network, and the win 7 machines can see each other perfectly, but I still cant get the XP machine to see the win 7 computers/have the Windows 7 computers see the XP one. Also I can't get anything into connection with the XBOX.
View 3 Replies View RelatedRunning Windows 7 RC 64-bit. Everything working fine within Windows XP Mode. All of the network and network devices are visible. All systems have same user account and password. Network is workgroup called WORKGROUP.
Per the instructions, I uninstalled the previous versions of Windows Virtual PC and Windows XP Mode, downloaded and installed the new RC versions of these products. Everything installed fine, but within the XP virtual machine I do not have access to any of the other resources on the my network. Previously they were all visible.
I went though the normal XP network set up, but the only thing that is visible within XP is the XP machine itself. My network is a simple non-domain network named WORKGROUP. What do I have to do within the Windows XP Mode virtual machine to see the printers and other systems on the network.
Why would 5 of my windows 7 machines be running slow on our school network. I have updated drivers. We also have new laptops which are running windows 7 and access the network wirelessly. These are fine. The Main server is 2008 r2 while the data is stored on a 2003 server.
View 1 Replies View RelatedI upgraded to windows 7 ultimate a few weeks ago (clean install) and since then when I go to access files on my file server (running vista home premium) it takes forever to pull up thumbnails of photos I have stored or any other data for that on the drive. I never had this problem when my comp was running vista home premium as opposed to windows 7 I flashed the BIOS on my mobo to the latest version and I have all windows updates. Any ideas what I can do to speed things up when accessing this drive?
View 3 Replies View RelatedI recently got a new PC and transfered all my old settings/documents to the new machine. First off, thats an awesome feature I wasnt even aware of! However, Im concerned about one thing; on my old PC, my wife used to have a profile that she used for work and had some confidential financial documents on. She deleted her profile some time ago when she got her own PC, but could it possbily have transfered her old/deleted documents onto my new machine? I only ask because I mainly use my new PC for work/presentations (in public places). While its unlikely, I just wanted to make sure no one would have access to those old documents should they gain access to my new machine.
View 4 Replies View RelatedI am looking at a solution to tap into the portability of virtualization across hardware. i.e. if I have my development environment as a VM, I can access it and bring it up from any machine on the network. This will enable me to be not attached to any physical machine and allow me to access my development machine seamlessly from anywhere if it is stored in a network location. I have mainly two questions around such a setup.
1) Is there anyway of hosting the VM without incurring the expense of both the host operating system and the guest operating system? The only functionality of the host operating system to host the VM.
2) Is it viable from a performance stand point to have a VM booted up on a machine from a vhd placed at a network location?
How a machine Windows 7 or XP once goes to sleep/hibernate mode, can be identified on the network to do a Wake-On-LAN. Because the machine is shutdown, the ping does not give a response. In a DHCP environment, when the machine goes to sleep mode, the ip is released so not necessarily the machine can be identified with its IP.
View 2 Replies View RelatedI have an XP virtual machine running on a 64-bit Win 7 host. I have a home wireless network that I need to access from the XP VM in order to use printers attached to the other computers on the network. All computers currently on the network have the same workgroup name. I have networking on the VM set to use the wireless adapter on the host laptop. With this configuration I can see and access the host, but I cannot see nor access any other computers on the network.
Now, it seems to me that I will need to run the XP Network Wizard to set up the network on the VM before I am able to see the network, but after reading dozens of articles and posts on networking a VM, I have never seen this step mentioned. (I am at work now, so I can't test this out on my network until later.) So, my questions are:
(1) Do I need to run the XP Network wizard to get the VM to join the wireless network, and
(2) if I don't need to run the wizard, what DO I need to do to get this to work?
We are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
View 8 Replies View RelatedNew windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies View RelatedWe have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View RelatedI have an old machine running Windows 2000 professional which I use as a printer server for a peer to peer network. My XP machine can see the computer and has the printer installed with no issues.Initially my Windows 7 (Home Premium) machine could detect but not access the 2000 machine. I found the fix (creating/setting the LmCompatibilityLevel key to a Dword of 1) and now I can sign on to the 2000 and access its files. (I ran the refreshpolicies commands on the 2000 also).When I try to instal the printer as a local printer it appears to instal. The existing driver is recommended (and accepted). When I print the test page it does not print. On the windows 7 the print queue eventually shows the page as having an error, while the print queue on the windows 2000 machine is empty throughout
View 1 Replies View Relatedi have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies View RelatedI was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies View RelatedI using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
View 1 Replies View RelatedI have installed Win 7 a while ago and today needed to print to my upstairs printer. My printer is a HP Deskjest 340 and it is connected to an iMac. I have all comps networked together so when i click add a printer my HP shows up as connected to my mac, no problem there. When i select the printer it starts to install a driver for it but a message comes up that says "No driver found" it asks me if i want to search for a driver on my comp but i don't have one to begin with. So basically I'm stuck. i have been to HPs website about there drivers and such and they don't have any drivers for Vista, they say the comp will look and find one for you while it did properly.
View 9 Replies View RelatedI just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies View RelatedI'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies View RelatedOriginally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies View Related
