Configure A Network Printer To A Pc?
Feb 9, 2013configure a network printer to a pc
View 1 Replies
ADVERTISEMENT
Epson Printer Won't Configure With Windows 7
Jan 24, 2012i got a packard bell pc today and for some reason when i plug my printer into it it says device unrecognizable, no matter what port i use. other usb devices such as the mouse and hard drive will work fine, with no problems, just the printer, epson dx4450
View 4 Replies View RelatedComputer Can't Configure Printer With Usb Connect
Aug 12, 2011I download the software for my Brother printer for installation. When I Run the installation till "Now plug in the printer with USP port and turn on the printer", nothing shows just like the printer did not plug in.
View 2 Replies View RelatedConfigure My WiFi Network Correctly ?
Sep 15, 2011I have a Desktop PC and a netbook. They are in the same room and so is my router. My router is a 2Wire from AT&T. All these devices support wireless G. My file transfer speeds from my desktop to laptop is going at a dismal rate of around 800KB/s. I am connected to my router at 54Mbps with my WiFi cards on both the systems. I am trying to figure out where this bottleneck is and try and speed this up.
-I am in an apartment building. There is least interference on channel 11 so I have set my router to use channel 11.
-The router is set to work at either B or G but I know I'm definitely connected by G on both the computers since I'm connected at 54Mbps.
-I have full WiFi signal on both computers and there is hardly any interference in my apartment that I am aware of. My internet bandwith is perfectly fine.
-Transfer rates between these two computers through a LAN connection is blazing fast. Its connected at 1Gbps and transfer rates are around 100MB/s
-If I connect the desktop and netbook in the Ad Hoc mode, I get a pretty steady 2MB/s
-In the registry, I have set the NetworkThrottlingIndex to FFFFFFFF hex (so throttling is essentially turned off) but that makes no difference.
Configure Hp To Scan To Any Of The Computers On Home Network?
Mar 4, 2012how do I configure the printer through the router so that the other computers can use the printer's scanning capabilities.
I have 6 wireless computers on a home network. My wireless router has an input to accommodate a printer. Currently the printer is connected to computer 1 via USB and all the computers can print from the printer as long as computer #1 is turned on.
My question is how do I configure the printer through the router so that the other computers can use the printer without #1 computer being turned on?
How To Configure Hp 1280 Network Driver 64 Bit Windows 7
Jun 13, 2012How to configure hp 1280 network driver 64 bit windows 7
View 1 Replies View RelatedHow To CONFIGURE TP LINK ROUTER As ACCESS POINT In An Existing Network
May 11, 2012I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies View RelatedConfigure Wireless Router WNR500 To Existing Wireless Network?
Oct 19, 2012how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View RelatedReaching A Network Printer In A Home Network?
Jan 20, 2011New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies View RelatedPrinter Driver For Network Printer?
Mar 18, 2010We have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View RelatedHow To Setup Network Printer
Dec 10, 2011I was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies View RelatedNetwork Printer On Xp Machine?
Nov 30, 2011I put a new win7pro pc on line. I want to connect to a brother printer on the network connected to a xp pro sp3 machine. I can see it in active dir. but comes back .inf file not found. I tried local install \\machinename\printername,I downloaded drivers six ways from Sunday,I tried everything I could find to try.It either comes back cannot find network or .inf not found.
View 1 Replies View RelatedPrinter Not Printing Usb & Network?
Sep 9, 2011I using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
View 1 Replies View RelatedPrinter On Network - No Driver
Jan 23, 2009I have installed Win 7 a while ago and today needed to print to my upstairs printer. My printer is a HP Deskjest 340 and it is connected to an iMac. I have all comps networked together so when i click add a printer my HP shows up as connected to my mac, no problem there. When i select the printer it starts to install a driver for it but a message comes up that says "No driver found" it asks me if i want to search for a driver on my comp but i don't have one to begin with. So basically I'm stuck. i have been to HPs website about there drivers and such and they don't have any drivers for Vista, they say the comp will look and find one for you while it did properly.
View 9 Replies View RelatedNetwork NEC P30 Dot Matrix Printer
Oct 4, 2009I just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies View RelatedWireless G Or N For A Network Printer?
Aug 17, 2012I'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies View RelatedCan't Connect To Printer On Different Network?
Jan 29, 2011Originally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies View RelatedLosing Network Printer?
Apr 1, 2012I am connected to a network through a router and the printer I use is connected directly to another computer. On initial boot up my computer shows the printer under "devices and printers" and I can print. However over time, the printer disappears from "devices and printers" and the only thing I can do is re-boot to get the printer back. How do I stop the computer from loosing the printer?
View 2 Replies View RelatedCannot Print With Printer On Network?
Jul 22, 2012I have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies View RelatedHomeGroup HP Network Printer
Nov 10, 2009I have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
Network HP Printer Won't Install
Dec 28, 2009Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router.
Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer.
Went back to XP where the printer works and found it is currently working with IPX protocol.
Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
Printer And Network Not Seen By Other Computers
May 10, 2009We use a HP932c printer as our network printer but no other computers on our network can see it. Everything is set for sharing on Windows 7 and on the other computers which are running XP and Vista. Anyone have a clue why I cannot get the other computers to see the network printer. Also Windows 7's network map doesn't see any of the other computers on our network. When our dual boot computer(Vista/Windows 7) is in Vista mode all is fine but when I boot into Windows 7 it doen't see the other computers and visa versa..
View 2 Replies View RelatedCannot Get The Network To See The Printer When Run The Software
Aug 8, 2011I used an epson workforce 600 on a prior network. I changed providers and have created a new network. I cannot get the network to see the printer when I run the software. I am using windows 7.
View 1 Replies View RelatedConnect A USB Printer To The Network?
Sep 9, 2011I bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies View RelatedAdd Printer Wireless Network?
Jan 6, 2012I we have a wireless network. all systems have xp windows. we have a printer hp laserjet 1320 that is installed on PC 1. i have a laptop connceted to that wireless network. i want to add the printer that is intsalled on PC 1. when i go to add printer, a list appear, i select the pc and go to add, but it ask for driver, when i put cd of the drivers, it dont find the driver and it shows me a message the "windows cant find the printer"
View 1 Replies View RelatedNetwork Printer Is Added But Nothing Prints?
Jan 19, 2009I have a HP1315 printer which is shared on an XP box on our home network. I've added the printer but nothing prints - it spools and disappears. Printer works fine from the XP machines on the network therefore assume it's something related to my Windows 7 installation
View 9 Replies View RelatedWindows 7 Will Not Recognize Network Printer?
Jun 26, 2011I have a desktop computer. I have an older Epson printer attached to the parallel port. I also have a USB Canon Pixma IP4000 printer attached to the desktop..I have 3 other laptop computers which connect wirelessly. The desktop and 2 of the laptops connect fine to the Epson and the Canon printers. These are all XP.But my newest computer is a W7 computer. It recognizes the Epson and works fine with that.How do I get it to see and use the Canon printer (I think it used to work with it). When I try and add a printer and specifiy network printers it does not find the Canon.
View 1 Replies View RelatedCanon Mp 480 - Home Network - Printer Set Up
Nov 8, 2009I have a canon mp480 and I'm trying to set up the printer so I can print wireless like I had on my old vista op system but it seems canon mp480 does not support win 7. Does anyone know where I can get a driver for this to rectify this problem.
Look forward to your response.
Canon MX700 AIO Network Printer
May 1, 2009in all builds up to and including 7077 my Canon MX700 network printer was recognized and worked like a charm, including the scanner etc.
Now on a clean install of the RC (build 7100) the Canon network scanning utility comes up with a message saying it has known problems and to contact Canon.
I have tried it in all compatibility modes, administrator, the latest Vista drivers etc from Canon. I did manage to get it installed and it can see the printer but it will not allocate a port for it. When I try to allocate the port it will not work.
Canon do not have any way to contact them other than by phone (good one Canon) and I really have not had the time to sit on the end of a phone wating for them to tell me Windows 7 is not supported.
Oh...this is in x32 and x64 I have tried both but back on x32 for the moment.
I might try the long way....by reinstalling 7077 and then upgrading to 7100 but that is a bit extreme.
Anyone else had similar problems and solved them or do I just have to wait patiently for Canon?
Home Network Printer Not Responding
Oct 7, 2012Printer will not print. HP laptop Pavilion G7 and HP 7210 all in one printer home network. It keeps reporting printer off line. Contact administrator. I am the administrator. I changed the wire, replugged the computer and printer, contacted " system not communicting" What do I do?
View 1 Replies View RelatedSharing Printer Only Possible In A Home Network?
Apr 14, 2011Is it required to be in the same Home network to be able to share a printer?Or can both computers be in a public network only?
View 1 Replies View Related