When I select network I can see the other computers on the nework but when I click on any of them but my own I get an error " Check the spelling of the name. Otherwise, there might be problem with your network Error code 0x80070035 the network path not found" The computer is seeing them but says the path name is wrong. The others are vista machines and they all can see and access this machine. Any help would be great also I have no problem accessing the internet only the local computers I can't access.
WIN 7 64bits multi-users account, one and only one account has admin rights.I've installed the MS-Proofing Tools 2000 for MS-Word 2000 under the admin account without any error msg.When I try to spell/grammar check in some installed languages (i.e. German) I get "Word cannot open the spelling file c:programs files(x86)common filesMicrosoft SharedProofMSSP3GEp.lex for German(Germany)".
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I recently copied my HD's content to an SSD. Setup boot from the new drive w/o a hitch. Decided to format my old HD, and boom! Blue screen.After restart, windows wanted to search for solutions to the problem: this caused my computer to freeze up and blue screen again.
When my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
If chkdsk will not run when you click error check at Computer, what is the command prompt that will do it instead.I am looking for the two replacements only. One is the default with one check at computer and the second is if you were to insert a check at the default at computer.When I surf for this I get too much information rendering it useless to me at my level.
Computer has rebooted a couple of times in the last month. Added details from event viewer and also updated dump files. Critical Error - Event ID 41 Source Kernel-PowerThe system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
I'm trying to copy a video file from a DVD cam disk that has been finalized but keep getting a CRC error. Is there any way I can retrieve the file and copy to my laptop hard drive? The video plays completely from the DVD. I have multiple DVD disks that we have videos taken from various times and I have not encountered this problem on others.
I am running Windows 7 64 bit and Office 2007 and one day I get the error "Outlook could not create the work file check the temp environment". The error itself was of no help but after searching and searching I found supposed "fixes". I have tried a number of them but then I shut down the computer for the day and the next day the error is back.I will email you a beer or something.I have tried:Deleting all files in the temporary folders since one "fix" noted a full folderChecking the HKEY in regedit.exe and all was well with %userprofile%local settingemporary internet files so the suggestion was to change to "temp" instead of temporary internet files.I went into Internet Explorer tools and moved the folder per another "fix"I went to regedit and changed CACHE value to c:wi
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
I have been made a back up from my original windows and all my laptop drivers, but when I tried to recover it the second back up dvd get the "Data error cyclic redanduncy check" and I lose my original windows and my drivers. Also when I installed another windows for some new software also this error have been shown.
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems.
However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet though my rooter, see my vista pc on the network as well as the media streaming (windows one) thing.
I can also access my net book hard drive from my pc no problem and transfer/delete files as well?
When I do try to connect the following error message is given: "Error code: 0x80070035 The network path was not found"
P.s. I know windows 7 basic has not create home group ability, but it worked with the one I made on vista. I can not afford to upgrade my copy of windows 7 so that is totally out of the question.
Yesterday I installed the final version of Windows 7 Professional 64-bit (from MSDNAA) on my computer which was previously running Vista Home Premium 32-bit. On Vista, the network worked wonderfully, but once Windows 7 was fully installed, the computer can't even find any networks. I rebooted and ran Windows Vista in safe mode, and, sure enough, the internet was working and everything.
I took a look at the device manager in Vista, and it listed NVIDIA nForce 10/100 Mbps Ethernet and Linksys wireless G PCI adapter under my network adapters. (Oddly, when I run device manager in Windows 7, it only lists NVIDIA nForce Networking Controller under network adapters.)
I thought for sure it was just a driver error, so I merely went on the laptop, downloaded Driver Robot, put it on my computer running Windows 7, ran the export scan, put the result scan on a flash drive, and downloaded the driver for the network adapter that it told me to. Then I put the driver setup on the flash drive, and copy it onto my computer with Windows 7. First, it told me that the file was corrupted, but after many tries, it finally worked. I updated my network adapter drivers.
Unfortunately, I still can't find any networks.
EDIT: I just looked at my device manager in Windows 7 again. Under "Other devices," it lists "Network Controller" with a yellow exclamation point.
when I turned on my computer this morning the computer didn't start the antivirus program, and I can got to system repair, I cant start Computer management I get an error message
The Error message says.
"Network Error
Windows cannot access C:Windowssystem32compmgmt.msc
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
In a network with 10 computers, the PC-2 can access everyone but the PC-5. All other computers can access each other and PC-5 can also access everyone else.
Where is the bug? The PC-2 has the bug right? Why is it only one PC that the PC-2 cannot access?
Basic routines are checked I think: All running windows 7 All having same network sharing settings, Network discovery ON (both home and public) File sharing ON (both home and public) Public folder sharing ON (both home and public) Password OFF (both home and public)
Error message say: "Check the spelling of the name." (?!?!)
So after installing windows 7 the other day, everything seemed to be working properly. I was able to access all of my network shares to my file server, and other machines in the house.
Even yesterday this all worked as normal. But now today I am unable to communicate with any other pc in the house. either by pc-name or ip-address. I receive the error 0x80070043: The network name cannot be found.
From a command window, I am able to ping all machines I have tested to, by IP address, and by hostname.
Starting a virtual XP session within Windows 7, I am able to browse to the shares in the XP session.
In the network section, no PCs are visible excluding the local PC. Attempting to browse to the local PC via the network results in the error message "The specified network provider name is invalid".
All PCs are in the workgroup "WORKGROUP"
Browsing around the network via my laptop functions with no issues.
Browsing the the windows 7 PC from other pcs works without issue.
I have a small home network connecting 2 PC's and a NAS drive. The network is hard wired using CAT 5 and there is also a wireless AP for the Wii console. When both PC's used XP either could access (read and write) to the NAS which is mainly used to store digital photos. Since upgrading one PC to Windows 7 I cannot access the NAS from this PC.
I can see the drive and can logon via web brwoser to conduct maintenance but cannot read or write using Windows Explorer. I always get the Netwrok Error 1208 statement. I suspect it is to do with new security protocols in Windows 7 not talking to older Samba software. Could someone offer some help please ?