I'm running Windows 7 64bit and have tried several times to install iTunes 10.5, both over iTunes 10.4 and separately. Everytime I get the error message - "a network error occurred while attempting to read from the file:C:|windowsinstallerapplesoftwareupdate.msi".
View 4 RepliesI have a problem with the parts of my network dropping out. iTunes seems to always cause the problem but it will also happen without running iTunes. When it happens firefox comes up with a blank page and the tab says "untitled'. IE will also not work. I'm not sure what it says as I only tested it to rule it out as a firefox only issue.
If I open up a cmd prompt and ping Yahoo! everything seems fine. If I have uTorrent running existing .torrents will continue to work fine, but if I add a torrent from my laptop it wont start.
The only way I can get back to browsing the web is to reboot.
Is this what the bonjour/Windows 7 issue is all about.
Things I've already tried: Refreshing the folder view Re-opening the "Open iTunes library" window Restarting iTunes altogether Typing \VBOXSVR in the browse window (result: one of those "network path could not be found" errors)While I was trying to access the resource in iTunes, I had no issues manipulating the network resource through Windows Explorer.
View 3 Replies View RelatedI have had a BSOD lately that I cannot seem to figure out. It mostly happens when I play MP3 files using iTunes. They are stored on my network drive, and my other computers do not have this problem. Here is my system information.
View 6 Replies View Relatedlooking for alternative for itunes for a while.I have an ipod touch 8gb.Now been looking at this piece of software and wondering will it recognise my ipod touch or will I have to stick to itunes,I have music photos & video clips on it now. This is what I've been looking at but will it recognise the ipotouch?? Link..... Free iTunes alternative - Manage iPod iPhone without iTunes
View 3 Replies View RelatedI just started getting this message when I open Itunes - "The folder "itunes" is on a locked disk or you do not have wriet permission for this folder"
View 2 Replies View RelatedWindows Startup repair occasionally pops up on startup though it can never find what the problem was. Interestingly its occurence dimininished rapidly when I replaced MSE with Avast.Anyway - loaded up as normal and then got a pop up concerning Itunes. The pop up said "Itunes not installed correctly. Please Re-install. Error 7 (Win error 193).The screen then flashed up with lines down it (very quickly) then onto a blue screen with various data. Windows then reloaded and everything was fine.The latter part has happened once or twice before a while ago. I had Windows reinstalled less than a year ago. I have replaced my grpahics card in the summer.I'm just concerned that one day the pc won't work. I'm unemployed as use the PC daily to search and apply for jobs...so it would be sod's law if this went down.
View 9 Replies View RelatedI have:
Dell Laptop Inspiron 1440
Windows 7 Home Premium 64bit OEM Full
3 GB Memory (2 Gb and 1 Gb sticks)
On board video
On board sound
Intel Dual Core Processor
After I removed an iPod from my laptop I never had installed before I got the BSOD after I restarted the computer. The message stated "Windows failed to start a recent hardware or software change may be the cause". I have tried startup repair from the OEM disc and have had no luck after 5 or more tries. I can boot into safe mode fine and connect to the internet. It will not start normally. The two options you get are start normally or launch startup repair and both of these fail when attempting. It always shows the error code 0x0000007e but some of the code in the parathensis change each time I boot the computer.
I went to install the newest itunes last night, and during the instalation I got the message "error getting file security". I right clicked the installation file and ran as administrator, and have my UAC all the way down.
View 3 Replies View RelatedI am using windows 7. When load itunes 10.5 I receive message system has not been modified.
View 1 Replies View RelatedI'm trying to downgrade from iTunes 10.5 to a version that doesn't crash (see my previous thread). However, whenever I do this, I cannot import my Library file (.itl) because it was created by a newer version of iTunes.
View 1 Replies View RelatedI have a problem with my iPod touch. It is a new iPod touch and i had no problem with it for a long time then one day it just started to not work. every time i plug it in it comes up with a error message saying .It wont charge or connect to iTunes so i cannot sync any music.
View 4 Replies View RelatedI am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I use iTunes on my Windows 7 computer to sync with my iPhone, and the last time I went to open iTunes it gave me the error message "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."I had heard that if I uninstalled Quicktime (which is bundled with iTunes when that is downloaded), then reinstalled it separately, it would work again, but after trying that it didn't. So I decided to just uninstall iTunes, then reinstall it. However, every time I try to uninstall it in Add/Remove Programs, it just sits there saying it'll be about eight more seconds to go to finish deleting, but it just sits, and sits, and sits...... Nothing. I also tried to just install the newest iTunes on top of the existing one, but every time I try it tells me that it's already installed and to click "Ok." So I can't uninstall it, nor can I install it, nor will iTunes open on its own. I had done a system restore recently, so I don't know if that had anything to do with it.
View 2 Replies View RelatedI have been ignoring this for sometime but just bought myself a nano and need the latest itunes in order to use it.
View 1 Replies View RelatedHere is the error I get when trying to install itunes.An error occurred during installation of assembly
'Microsoft.VC80.CRT,version="8.0.50727.
4053",type="win32",publicKeyToken="1fc8b3b9a1e18e3b",processo
rArchitecture='x86'. Please refer to Help and
Support for more information. HRESULT: 0x80070002
Here is the error when trying to install "Visual C++ 2008 SP1 Redistributable Package (x86)"
error 1935.An error occurred during the installation of assembly
'Microsoft.VC90.ATL,version="9.0.30729.1",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="86x",type="Win32"'.Please refer to help and support for more information. HRESULT=0x80070002.
I believe this has something to do with the windows update I installed previously. I am not 100% sure I did install it before the errors started happening, but I am pretty sure. I have full administrative permissions. I was able to install a ".NET" frame work, however, it did not fix my problem.
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
i am windows certified but , i have not studied about how to install windows 7 in networkwith another pc not a serverplease would you give the steps for that kind of installation
View 1 Replies View RelatedI have just placed a 2nd hand mobo (ASRock M3A770DE) into my pc. It'ts running win 7 ultimate, all h/w is detected ok apart from the integrated network card, therefore i cannot connect to the router and onto the internet. Since Windows 7 is not auto-detecting the integrated NIC, is their a file on the Windows 7 disk i can point it to when i manually try to install it?On a separate note i can connect to the net via my vaio, in case you can suggest where i can d/l a file from.
View 2 Replies View RelatedI was having problem running office 2007 on my windows 7 desktop hp machine. I uninstalled and wanted to install it again, this time i am getting this error message "error 1935. An error occurred during the installation of assembly component{4C0384C6-ED23-4E23-95F5-C812AAD8EFFE}. HRESULT: 0x8002802F"
View 1 Replies View RelatedI recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
i am on win 7 using a U300 laptop and i wanna install xp in a dual boot so i decided to use this guide: Dual Boot Installation with Windows 7 and XP
and use the 2nd method, so when u get to step 4 where u press enter, i press enter and i get the error saying i don't have an installed HDD drive and all i can do is press F3 and restart
I've just installed Windows 7 on top of my old XP machine. For the first hour I had no problems connecting to the internet. I downloaded antivirus protection (AVG) and Comodo firewall and windows 7 began updating itself. The comodo firewall download stalled and I had to manually reboot the computer. It seemed to start fine in normal mode and windows finished updating itself. Since then however (i.e. after the reboot) I have not been able to access the internet with an 'error 651" message displaying. I removed both AVD and Comodo with no change in the situation. I also did a system restore to before the windows updates, still no luck.
I access the internet via a broadband modem connected to a router. I don't have the full details of the models with me now but can repost in about five hours with the details if needed. I've searched online and note that many have said I should replace the raspppoe.sys file.
Since this is a brand new instal, should I just re-install Windows 7?
i've created another topic related to a BSOD . Anyways i've decided to format my OS so i did . But an error showed up , i'll tell you exactly what it said : Failed to create a new partition on the selected unused space.[Error:0x8004240f].That's what it said . I don't know what caused it but after i deleted that partition , i couldn't just make a new one it kept giving me this error
View 3 Replies View RelatedWhen I try to install this, I get an error.MSE Installation Error 0x80070643
View 10 Replies View Relatedtried to install chrome three times. it stopped everytime without any notices. downloaded complete, and started to install, hoop, gone.
i don't undersatnd why there is no full installation pack?
Hmm, anyone know what it means by "Windows features" ?
View 9 Replies View RelatedJust decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying
"Windows failed to load because a critical , missing, or corrupt"
"windowssystem32drivers
tfs.sys"
Would appreciate the help if anyone can.
I have built new PC ( mb: asus M5A78L-mlx Plus,cpu: AMD 2 x 260,4GB Ram AM3,1TB HDD) Trying to install windows 7 Pro 64 bit and i get this error saying "Windows cannot install required files.Make sure all files required for installation are available ,and restart the installation." when the file are expanding.(0%).I have already changed the hdd, replaced dvd rom ,disable usb in bios,changed sata cable,removed the batt on MB and still no luck so far.
View 8 Replies View Relatedi tried installing win 7 pro upgrade from student discount onto a seperate 1tb drive. i have vista premium and was doing a dual boot. files would load but after that i would get this error: winload.exe error. tried installing it alone onto the 1tb seagate drive, removing the vista drive but still the same error.
remove every peripheral and 2 stick of ram but still the same error. system is intel q6600 on an asus p5ke-wifi with 4 gig of 8500 ocz ram. also tried repairing my vista installation but the same error appears.
I'm getting a very strange installation issue. I was hoping someone could shed some light on my problem.
To start with, I'm using a Windows 7 v7000 installer disk. I'm confident that this installer is good, because I've already set up my gaming machine with it.
Now I want to install Windows 7 on my home theater PC. The components are as follows:
ASUS P5N-EM HDMI
Intel Core 2 Duo 2.66Ghz
Western Digital HD
2 GB of Ram
I am able to install windows Vista on this machine with out a problem.
This is what happens when I attempt to install windows 7:
Everything appears to load off of the DVD drive. I go through "Copying Files," "Expanding Files," "Installing Features," and "installing Updates." Then the machine reboots.
The installer continues to behave as expected, with "setup is updating registry settings." Then it reboots again. This is where the Sh*t hits the fan...
After the reboot, it takes me into a black screen "Windows Error Recovery." If I ask the machine to start up normal, it immediately reboots again, returning to another "Windows Error Recovery" screen. It will repeat this cycle forever.
If I ask it to start in Safe Mode, then I get the following error message: "Windows cannon complete installation in safe mode. To continue installing windows restart the computer."
I'm at a loss. I even downloaded build 7022, and the problem still persists.