im preparing to do a complete reinstall of windows 7. before writing zeroes to the entire drive, i need to be sure i have all the tools i need for the reinstall. im trying to make sure i have all the recovery media i need.is a system repair cd the same thing as a recovery cd?ive read through the tutorials on how to create a system repair disk, and have done so. although, both terms, "recovery" and "system repair" are used quite frequently in the tutorial.the next part of the process is to wipe the hard drive, i just need to be sure i dont wipe something i should have burned to a disk...
I have a hp g62-231nr laptop and it broke before sent it out, got it fixed and everything was great. about four or five months go by and one night i was playing games on the laptop, the laptop died plugged it in and went to sleep. woke up in the morning to a black screen says media cable something something no bootable device please insert bootable disc and press any key. I downloaded the windows 7 system repair disc and popped it in it loads up says there is no operating system and load drivers cant find any drivers but there is a hard drive disk named Boot (x and two removable devices, the system repair disc in the dvd drive and removable device C. I cancel and press next and be brought into system recovery menu I click on startup repair or system repair. It tries to find problems than says cannot repair windows automatically I click details and this is in the white box.
Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I exit out and cannot do system restore memory test is 100% ok. BIOS system diagnoic says error code 03f0 Hard Drive Not Exist the main BIOS menu says the BIOS system is idle. Version for BIOS system F.17 i tried the recovery disks but it says that windows does not support the media on this device. I also have an .iso file of windows 7 home premium dvd but it doesn't do anything so im thinking its a bad .iso copy of windows somehow or I burned it wrong maybe? If there's any other information needed i will gladly post it just ask. also I cannot get to logon screen on startup. The hard drive makes the same soft spinning sound not beeping or anything. I need this computer for work its a business laptop. also i cannot access system recovery from F11 the words show up in bottom left corner on startup but even if you repeated hit f11 or hold it down it brings screen to black screen media cable failure check cable exiting pxe-rom..no operating system etc.
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
I'm working on a friends PC, a win 7 64 bit on a Lenovo Ideapad model B560. This thing has One Key Recovery installed.. Instead of having factory restore disks this tool recovers the system to factory defaults via a hidden partition that contains the restore data.More info about One Key Recovery here What is OneKey Recovery? - Yahoo! AnswersYou cannot change or resize partitions or One Key Recovery wont work. This PC had malware on it and can't boot into normal windows mode (that's the main problem) .. but it will boot into safe mode. I removed the malware with Malwarebytes but the PC still wont boot in normal mode. I tried to use One key Recovery but it refuses to work in safe mode.
One Key Recovery sets up the PC with 3 separate partitions. A C drive for Windows and pre-installed Lenovo software, a D drive that's large for data and the hidden recovery partition. I don't want to cripple this functionality so I can't do a complete reinstall of windows from a win 7 dvd. I thought I'd use a win 7 dvd to do a repair install instead - hoping this wont mess with the partitions but just fix the windows errors keeping it from booting normally. I'd be using the Win 7 64 bit with service pack 1 integrated from Digital River.I want to know before I try this - will it work? Will it fix the errors without messing with the partitions? If so, perhaps after it's finished, I will then be able to use the One Key Recovery option if I need it. I have to verify this before I try it and mess something up that I can't recover from
My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?
I tried to repair it using F11-F10-F8 but it didn't work.
I have a question on the use of the Recovery repair center CD, which was made on a 64 bit windows 7 system. My friend has a system running Vista 32 bit that has booting problems, so can he use this disk, or does it need to be only a 32 bit Vista only type of recovery disk ? His computer is a HP Pavillion a1744x with Vista Business 32 bit installed. Also is that recovery CD a free download available to burn the iso file to a CD?
Just received my new Dell Inspiron 620 yesterday and am working thru setup options. One of the first things on my list is making sure I have the appropriate repair/recovery prep in hand for the inevitable All that came with the pc was a Drivers and Utilities cd.So far, I have created a Repair Disk...do I also want/need to create a System Image?I've only created the Administrator acct at this point, but will need to create at least one User acct for lovely wife (and it seems I should also be creating one for myself as well, and not using the Admin acct, from some things I've read).
So I swapped mobo's and ran into some problems so I did a repair install to resolve them. After the Repair Install, Windows deactivated and is asking for my key again. Unfortunately I do not have my key and I am unsure whether I will be able to find it again (having moved around a few times, I am unsure if I even have the install disks). After swapping mobo's Windows did NOT deactivate, everything was fine activation wise after the swap. I don't suppose there is any way to recover my key, is there?Right now, I've noticed that a new folder was created during the upgrade called $WINDOWS.~Q that seems to have my old registry in there, so I am thinking of trying to back up my current (new) registry and replacing it's files with the ones in that folder and running Belarc to see if it picks up the key then and then putting my new registry back.deas other than this?[CODE]
EDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).
So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I'm trying to cut back on programs installed to my SSD boot drive.However, almost everything is installed there. Even if I download and install from my HHD storage drive.(Google Chrome, Picasa, Java, Steam etc.). WIN 7 OS - Corsair 115GB SSD - WD 1TB HDD Storage.
sometimes, although i am logged as admin, i am not allowed to replace some files, even though i choose to permit, etc.how can i completely disable that thing, when i am already logged as admin?
I decided to do a system recovery for my laptop. I've already done a couple of experiments before and from what I remember the first time I done a system recovery, the partition where my personal files where saved did not get deleted.The only thing that was "system recovered" was the partition where the OS was located. Yesterday, I again decided to do a recovery but this time, the partition where I have my files got deleted and the space it had "returned" to the OS partition. Orignally, I shrunk the OS partition so that I can have space for my partition for my personal files.If it helps, I've done a "system recovery" but saw one of it has a "mini system recovery" option. What is the difference?
I had a virus that would redirect me to advertising, and it wouldn't let me scan for it on any anti virus software. No spyware worked, so I decided to load a new windows 7 on my laptop, fresh start. But as it got to the end of the installation where the menu said completing, it sat like that for 3 hours, so I turned it tooff, and now it keeps loading into the same thing that saids "the computer restarted unexpectedly or encountered an un expected error. Windows installation cannot proceed. To install windows, click ok to restart computer< and then restart installation", I click ok, and it just keeps restarting into the same menu.
I am trying to modify the attributes of a file (in this case the album title for a group of MP3 files in 1 folder).All I want to do is change one character.W7 (home premium 32bit) blanks out the whole box, and I have to type the all of the text again.
yesterday it crashed when it restarted it went into system repair and everytime i restarted it went into the system repair not sure if this is relivant but i get a dos windown come up with drvload.exe so i did a hdd factory restore thinking this would clear the problem but it hasnt, now im still getting a system repair everytime i do the mircosoft updates when i restart, plus i cant open hardly any programes like firefox, add and remove programmes.Im now running a harddrive check to see if i have any bad sectors within it, have also run mcfee scan which showed no viruses.
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
yesterday I was enjoying a match of league of legends on my computer and it completely froze up on me. I had no option but to give it the hard shutoff, so I held down the power button. Upon starting my computer back up, I was brought into system repair. It tried to repair and then said it could not be repaired, and so I restarted it. It then said it went into repairing once again and said it may take up to an hour. A minute later it said the errors were fixed, and restarted the system for me. It then continued to do that and has been doing that every time I restart it.I tried logging in to safe mode but it just brought me into system repair.I tried to restore to an earlier point but the restore failed.I tried using a Windows 7 Reinstall disk and had odd results. The first time it said a file was missing during the expanding files. The Second time it got to completing install and then said the disk was missing files to complete and to contact the disk manufacturer. I'm currently running it one more time to see if I can get it to work.All I have plugged in is the mouse, the keyboard, and the monitor.
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
