Repair Install Deactivated Windows 7, Don't Have Key, Recovery Possible?
Nov 30, 2012
So I swapped mobo's and ran into some problems so I did a repair install to resolve them. After the Repair Install, Windows deactivated and is asking for my key again. Unfortunately I do not have my key and I am unsure whether I will be able to find it again (having moved around a few times, I am unsure if I even have the install disks). After swapping mobo's Windows did NOT deactivate, everything was fine activation wise after the swap. I don't suppose there is any way to recover my key, is there?Right now, I've noticed that a new folder was created during the upgrade called $WINDOWS.~Q that seems to have my old registry in there, so I am thinking of trying to back up my current (new) registry and replacing it's files with the ones in that folder and running Belarc to see if it picks up the key then and then putting my new registry back.deas other than this?[CODE]
I'm working on a friends PC, a win 7 64 bit on a Lenovo Ideapad model B560. This thing has One Key Recovery installed.. Instead of having factory restore disks this tool recovers the system to factory defaults via a hidden partition that contains the restore data.More info about One Key Recovery here What is OneKey Recovery? - Yahoo! AnswersYou cannot change or resize partitions or One Key Recovery wont work. This PC had malware on it and can't boot into normal windows mode (that's the main problem) .. but it will boot into safe mode. I removed the malware with Malwarebytes but the PC still wont boot in normal mode. I tried to use One key Recovery but it refuses to work in safe mode.
One Key Recovery sets up the PC with 3 separate partitions. A C drive for Windows and pre-installed Lenovo software, a D drive that's large for data and the hidden recovery partition. I don't want to cripple this functionality so I can't do a complete reinstall of windows from a win 7 dvd. I thought I'd use a win 7 dvd to do a repair install instead - hoping this wont mess with the partitions but just fix the windows errors keeping it from booting normally. I'd be using the Win 7 64 bit with service pack 1 integrated from Digital River.I want to know before I try this - will it work? Will it fix the errors without messing with the partitions? If so, perhaps after it's finished, I will then be able to use the One Key Recovery option if I need it. I have to verify this before I try it and mess something up that I can't recover from
I have a question on the use of the Recovery repair center CD, which was made on a 64 bit windows 7 system. My friend has a system running Vista 32 bit that has booting problems, so can he use this disk, or does it need to be only a 32 bit Vista only type of recovery disk ? His computer is a HP Pavillion a1744x with Vista Business 32 bit installed. Also is that recovery CD a free download available to burn the iso file to a CD?
Just received my new Dell Inspiron 620 yesterday and am working thru setup options. One of the first things on my list is making sure I have the appropriate repair/recovery prep in hand for the inevitable All that came with the pc was a Drivers and Utilities cd.So far, I have created a Repair Disk...do I also want/need to create a System Image?I've only created the Administrator acct at this point, but will need to create at least one User acct for lovely wife (and it seems I should also be creating one for myself as well, and not using the Admin acct, from some things I've read).
I have a hp g62-231nr laptop and it broke before sent it out, got it fixed and everything was great. about four or five months go by and one night i was playing games on the laptop, the laptop died plugged it in and went to sleep. woke up in the morning to a black screen says media cable something something no bootable device please insert bootable disc and press any key. I downloaded the windows 7 system repair disc and popped it in it loads up says there is no operating system and load drivers cant find any drivers but there is a hard drive disk named Boot (x and two removable devices, the system repair disc in the dvd drive and removable device C. I cancel and press next and be brought into system recovery menu I click on startup repair or system repair. It tries to find problems than says cannot repair windows automatically I click details and this is in the white box.
Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I exit out and cannot do system restore memory test is 100% ok. BIOS system diagnoic says error code 03f0 Hard Drive Not Exist the main BIOS menu says the BIOS system is idle. Version for BIOS system F.17 i tried the recovery disks but it says that windows does not support the media on this device. I also have an .iso file of windows 7 home premium dvd but it doesn't do anything so im thinking its a bad .iso copy of windows somehow or I burned it wrong maybe? If there's any other information needed i will gladly post it just ask. also I cannot get to logon screen on startup. The hard drive makes the same soft spinning sound not beeping or anything. I need this computer for work its a business laptop. also i cannot access system recovery from F11 the words show up in bottom left corner on startup but even if you repeated hit f11 or hold it down it brings screen to black screen media cable failure check cable exiting pxe-rom..no operating system etc.
My Laptop has switchable graphics (intel+amd radeon). I disabled the display drivers from the device manager in properties of my computer for programming purposes. i forgot to enable the drivers before shutting down the laptop and now i am facing a problem in booting my system. The windows logo appears and after that just a blank screen with a mouse pointer. can i enable the display adapters from dos?
I just bought a new machine that came with an unactivated version of Windows Vista Home Premium. I'm wondering if I need to activate vista first before I upgrade to 7, or no?
Will Windows 7 Upgrade come with it's own activation Key?
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
I have tried to do a system restart and when it gets to the welcome screen login part my screen turned to a Red Screen with bright yellow text claiming that "The hardware on this computer has been deactivated" and to call my local provider. The message also says it's in 'Special Lockdown Mode'. I have the option of Rebooting or Shutting Down and even going to Safe Mode does nothing! I do believe this is a virus.
im preparing to do a complete reinstall of windows 7. before writing zeroes to the entire drive, i need to be sure i have all the tools i need for the reinstall. im trying to make sure i have all the recovery media i need.is a system repair cd the same thing as a recovery cd?ive read through the tutorials on how to create a system repair disk, and have done so. although, both terms, "recovery" and "system repair" are used quite frequently in the tutorial.the next part of the process is to wipe the hard drive, i just need to be sure i dont wipe something i should have burned to a disk...
My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?
I tried to repair it using F11-F10-F8 but it didn't work.
EDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).
So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
I decided to give my acer aspire 5515 to my stepson, so i was reinstalling windows 7 on it and it accidently aborted before finishing installing. Now when I put my disc in it doesn't read it and never repairs it, never completes it, just keeps rebootiing. I have tried set up default settings, system repair, but nothing works.
I'm looking for some assistance. I posted a while ago regarding this issue and I thought I had managed to find the source however, the problem has re-emerged again. I had submitted another update on my previous thread but haven't received
In summary, Windows Explorer regularly crashes - when I say regularly, I mean every time i access windows explorer.
I completed a repair install and thought this fixed the issue but it hasn't.
The crash is not related to any particular folder - it can happen when accessing My Docs or Prog Files, or any other folder.
I want to do a start up repair but only have a upgrade disk. When I try to do the start up repair and pick the OS on the hard drive it comes up with a error saying the os is not compatible even tho the upgrade was done from this disk. Can I do a start up repair or clean install without losing any software or personal files?This computer has no back up's.My reason for wanting to do a start up repair is yesterday when I woke up my computer from sleep mode the hard drive kept and is always accessing but the CPU was not really doing much so I had to wait and wait and waitIt will say a software is not responding then after a long wait time the file will open or a program will respond.To just open folder takes 5 min, open files 5+. re starting or starting from the off position takes about 15 min
My computer has been running the Upgrade version of Windows 7 (from Vista) for two or three years. I want to perform a repair install, but wonder whether it would be possible from a new, current Windows 7 disk.
With XP I used to boot from the CD, and tell windows to 'upgrade' the existing broken / unbootable version of windows already installded on the system.I have a similar case now with a widows 7 install, and if I boot from the DVD and then tell it to do an upgrade install it tells me that I need to boot into windows and then run setup. Well, I can't boot to windows... I tried all the 'repair start-up' options to see if that would fix it, and it hasn't so I need to do an install to replace what's gone or broken or whatever, but it only wants to let me do a full clean install.
I am in the process of upgrading my motherboard and cpu. The problem is that I don't want to reinstall windows 7 fresh. Can I use the repair install option to reinstall windows without losing my programs and data? Basically I need all the drivers and such to reset but not mess with the rest of my stuff.
I have my brothers Dell vostro laptop with me. Right now it has a fresh windows 7 install. But I need to re-install Windows 7 using his 2 recovery dvds. Edit 2: I got the screen in which they asked me to put the last dvd from the system image. I put it and clicked refresh but it isn't showing up in the list.
So my 64bit fujitsu lifebook laptop has run into some crazy problems the last few days. Including freezing every several minutes for ages. BSOD a few times a day. Nothing along the taskbar opening. Task Manager making the whole screen turn black etc.I researched alot and tried many things, including chkdsk which just takes to long for it to be realistic (i judge it would take about 1 week to finish)That being said, i want to do a repair install of windows 7, but when i use my universal disc (which has 32bit and 64bit windows 7 on it) it returns the error after the compatibility check:
- You can't upgrade 64-bit Windows to a 32-bit version of Windows. To upgrade, obtain a 64-bit version of the installation disc, or go online to see how to install Windows 7 and keep your files and settings.
- 32-bit Windows cannot be upgraded to a 64-bit version of Windows. To upgrade, obtain a 32-bit version of the Windows installation disc. is there a workaround for this? I know people can make a universal disc easily, so maybe there is a way to do this in reverse
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit AMD Phenom II X4 965 Galaxy GeForce GTX 460 16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
