I have my brothers Dell vostro laptop with me. Right now it has a fresh windows 7 install. But I need to re-install Windows 7 using his 2 recovery dvds. Edit 2: I got the screen in which they asked me to put the last dvd from the system image. I put it and clicked refresh but it isn't showing up in the list.
View 2 Repliescannot install windows 7 from recovery DVD's
View 1 Replies View RelatedI have a Toshiba Satellite with a badly damaged windows installation. I want to do a complete re-install but cant start the recovery image from the Windows 7 repair my computer option. I can however access the recovery image from the partition and have copied it to an external USB hard drive. Can anyone tell me how I can start the re-install from the recovery image now on the USB external HD. Can I somehow create some re-install DVDs from this recovery image?
View 4 Replies View RelatedI have had trouble with Windows 7 media centre and corrupt audio drivers and followed the tutorial install from my manufacturers supplied OEM disc. However, I seem to have installed the fresh install in a recovery partition and so now have 2 installs of windows 7 and am given the option of which one to use on boot up. The audio problems are not there in the second install but it is obviously in the wrong part of the drive as I now get a warning message saying that my recovery drive E is full. How do I uninstall the newly installed version from this drive and then I can go back to the original version and have another go of getting this to work properly. When I tried the install I was not permitted to install into the C Drive (OS) but I presume that this is where it should have gone.
View 6 Replies View RelatedI want to install windows 7 ultimate x64 bit version on my Laptop. currently i have windows home basic version on my laptop with one C drive and one HP Recovery partition as a D drive. If i install ultimate, will i get recovery partition drive?
View 3 Replies View RelatedSo I swapped mobo's and ran into some problems so I did a repair install to resolve them. After the Repair Install, Windows deactivated and is asking for my key again. Unfortunately I do not have my key and I am unsure whether I will be able to find it again (having moved around a few times, I am unsure if I even have the install disks). After swapping mobo's Windows did NOT deactivate, everything was fine activation wise after the swap. I don't suppose there is any way to recover my key, is there?Right now, I've noticed that a new folder was created during the upgrade called $WINDOWS.~Q that seems to have my old registry in there, so I am thinking of trying to back up my current (new) registry and replacing it's files with the ones in that folder and running Belarc to see if it picks up the key then and then putting my new registry back.deas other than this?[CODE]
View 3 Replies View Relatedhave forgotten my Toshiba password, how do i start the backu disks?
View 3 Replies View RelatedI have the original recovery disks I made when I first got my laptop and am wondering if I could use them to install windows 7 onto my desktop?A few details if needed...laptop - toshiba satellite p755d 4 months[CODE]
View 7 Replies View RelatedI recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
Recently i bought a windows7 Ultimate, and i want to install it on my laptop. , my laptop working with vista.My hard disk drive has two partitions. one is OS(C: ) and another is called Recovery(D: ).my question is: How can i remove Recovery driver (which is related to vista) and install a completely new Windows 7 on my laptop?
View 4 Replies View Relatedeway with Windows Vista x64 and want to upgrade to Windows 7. I've been trying to figure out how to do it by following along to another thread in here but as BarefootKid mentioned, it is probably best that I start my own threadAfter I install Windows 7 and it completes and reboots it takes me to system recovery but it is the system recovery for Windows vista. I've been trying different things like formatting the partition right before the install and making the partition that Windows 7 is going to go on "active" in the .cmd prompt. I keep going in circlesinstalling Windows 7, getting system recovery and eventually choosing to reformat from Gateway's manufacturer settings...although once I do this I can't actually get back into Windows Vista as that now seems to be messed up. (I don't have the original Vista installation cd). Then I try rebooting and installing from the Windows 7 cd again to try more techniques to get it to work...I'm at the point of possibly deleting the recovery partition because the Vista remnants seem to be on this partition and taking over once I install Windows 7.
View 7 Replies View RelatedI have two computers. One is a HP P6820 and came with Windows 7 Operating System Recovery Disks. The other is an Intel DG35EC and has Windows XP Home Edition. How can I use The HP Recovery disks to install Windows 7 unto the Intel computer replacing Windows XP? I tried using the HP OSR disks on the Intel computer to instal Windows 7 but it didn't
View 1 Replies View RelatedI'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
So I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".
When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support
Desktop machie with Windows Vista Home Premium.
The first thing I did after the purchase of the PC was burning DVD's of the recovery files provided by the manufacturer.
A little bit of noice from the machine's original HDD is noticed recently. I want to replace this HDD by a new one. And install the OS from the recovery DVD's.
I have Asus EeePC 1215B. Today I was installed Windows 7 from usb flash. I mean clean install. But now I cant run F9 recovery. When I am pressing F9 during boot it show Windows boot manager but system recovery from Asus not work .
I dont delete hidden recovery partrition from HDD. Is here possible way, to run Asus recovery?
I am trying to install windows 7 onto my new ssd and i have a recovery flash drive it loads up fine but doesn't give me the option onto which partition im installing i have a hp dv7 that has two hard drives i have a healthy windows partion on my old hdd and my sdd i want to put the same copy of windows the files show up on the drive like it was installed correctly and shows mbr partion but doesn't bood (on ssd) also it partioned my 128 gb to 80gb partiion in the middle and 10 gb at beginning of unallocated space and the rest unallocated at the hopefully i have win 7 home premium i have the key but no disc of os just recovery flashdrive
View 4 Replies View RelatedI had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that windows is unable to install to "thuis systems hardware"(besides buying a recovery CD or new OS. Have college work due end of week.
And now its saying hardisk failure and bios is not recognizing my HDD..
I'm working on a friends PC, a win 7 64 bit on a Lenovo Ideapad model B560. This thing has One Key Recovery installed.. Instead of having factory restore disks this tool recovers the system to factory defaults via a hidden partition that contains the restore data.More info about One Key Recovery here What is OneKey Recovery? - Yahoo! AnswersYou cannot change or resize partitions or One Key Recovery wont work. This PC had malware on it and can't boot into normal windows mode (that's the main problem) .. but it will boot into safe mode. I removed the malware with Malwarebytes but the PC still wont boot in normal mode. I tried to use One key Recovery but it refuses to work in safe mode.
One Key Recovery sets up the PC with 3 separate partitions. A C drive for Windows and pre-installed Lenovo software, a D drive that's large for data and the hidden recovery partition. I don't want to cripple this functionality so I can't do a complete reinstall of windows from a win 7 dvd. I thought I'd use a win 7 dvd to do a repair install instead - hoping this wont mess with the partitions but just fix the windows errors keeping it from booting normally. I'd be using the Win 7 64 bit with service pack 1 integrated from Digital River.I want to know before I try this - will it work? Will it fix the errors without messing with the partitions? If so, perhaps after it's finished, I will then be able to use the One Key Recovery option if I need it. I have to verify this before I try it and mess something up that I can't recover from
i have one toshiba laptop model no c660 i want to reinstall my recovery disk
View 2 Replies View RelatedI had purchased dell XPS15 with Windows 7 professional, where dell is no more providing os installation media i made a recovery disk.
First i want partition C: drive without formatting it. and then How can i install dual booting os with this recovery disk?
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
View 2 Replies View RelatedI was trying to restore the computer the FIRST TIME I got it, but I've found out that the Recovery copy won't make any changes because I have two(2) Program Files for Internet Explorer, one is for 64bit OS, and the other is 32bit (x86).I've tried to enter in the command prompt: takeown /f "C:Program Files (x86)" /r /d n and it displays ERROR: The current logged on user does not have ownership privileges on the file (or folder) "C:Program Files (x86)". But I am the administrator and the owner of this Hitachi Laptop Windows 7 Home Premium, 64-bit OS.I could not play any movies via internet, and I don't know what plug-ins are missing, so I want to restore the computer to its Factory setting.
View 6 Replies View Relatedwhich of the 5 recovery disks from geek squad has install media for device?
View 1 Replies View RelatedI bought a Toshiba Satellite L500-20Z, and it does not tell me which version I am running, ( 32or64 ) though I know it IS x64. The in-store shpeil said it was equipped with Win 7 Home premium 64bit, with 32bit recovery partition.
Question 1 - is there any way to tell between 32 or 64 (apart from a "Program Files (x64)" folder on my C: drive), and
Question 2 - how do I tell what build I have? (the above link says nothing)
Question 3 - how to tell if the recovery is 64 and not just 32 without wiping my existing install?
(I suppose I could take an image of my current C: drive and use that instead of the recovery partition if disaster strikes.... only trouble is with OEM theres so much bloat and crap that's incluided...)
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View RelatedI've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies View Relatedis not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
View 4 Replies View RelatedI am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies View RelatedIt seems to me that XP's recovery console is somewhat better than the one that comes with Vista or 7, unless someone can point me in the right direction for finding further documentation on this topic.
The main difference is the lack of ability to tinker with services (LISTSVC / ENABLE / DISABLE commands). A missed opportunity is the lack of registry tweaking, considering that REGEDIT can be run, but I think it only allows you to look at the registry for the recovery console rather than the main Windows installation, which doesn't help much (though I haven't tried to import/mount the registry file from the main Windows installation).
I have looked at some of the other posts, but I didn't find answers to my specific questions. I have an older pc with Win 7. I bought new hd to have dual boot XP/Windows 7, and I made the mistake of installing XP without first unplugging Win 7 hd. Now, of course my Win 7 MBR was over written by XP during installation. I was thinking of using "EasyBCD" utility to recover Windows 7 MBR, instead of manually at the dos/cmd promt. My question is, after Windows 7 MBR is recovered, will I be able to boot from either XP hd as well as Windows 7 hd? Do I have to make any changes to the BIOS? The answer to this next question may be obvious, but just want to be sure. Do I disconnect XP hd during recovery, or leave it connected? Do I have to do anything to the XP hd MBR, or is that over written during the recovery process, (that is, assuming it is to be left connected)? Reinstalling Windows 7 is not an option at the moment, since I have a lot of software that would need to be reinstalled. Finally, would it make a difference if Windows 7 was 64bit OS, or is the process the same as recovering Windows 7 32bit MBR. Don't remember if Windows 7 is 32 or 64bit. Sorry about the barrage of questions. Just trying to cover all the bases.
View 3 Replies View Related