Im having windows remote, and "shutdown" button has hibernation action, is it possible to somehow change it to real shutdown?
View 1 Replieshow can i remove shutdown (red button) from the locked computer screen (brought by pressing Windows+L key)..
View 2 Replies View Relatedhow do i prevent shutdown process after click on Shutdown button!
View 9 Replies View RelatedWindows 7 Professional: I think the shutdown button should have a confirmation prompt with a delay, whether on the Sign on page or the Start menu to allow for recovery when inadvertently clicking it. I know I can create my own shutdown, sleep, etc. but that does not resolve the issue, unless the shutdown buttons are disabled on the sign on page and the Start menu. If that cannot be realized the next solution is to make sure the shutdown button is set to other than shutdown by default(yes, it will not say shutdown then, maybe 'sleep') and shutdown is in the sub-menu instead. 'Lock' is not an option as some had suggested, unless it can be swapped with the 'shutdown'. I now found out they can be swapped... but it is misleading, because I thought the Power Button is the physical button on the hardware... thus when I press it now it will cause a lock?!
View 1 Replies View RelatedI try to power down (Shut down) my Win 7 PC and it (screen) goes dark but fans are still running. Its like it's only half off. I had this problem once before just after my change from 32 bit to 64 bit OS. Win 7 Pro 64 bit. I researched and after much digging I found the answer. However , as with any fresh install , upgrades abound and recently , the same problem reared its ugly head once again. The problem is , I cant seem to locate the solution this time ! I seem to remember a driver or a hotfix or just a particular ms upgrade.
View 9 Replies View RelatedI have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus (Kaspersky) and it still takes >15 min to boot and Shutdown. Is there something I can do before I decide to reinstall Windows &. (I dont have a install disk.) The software came with the Computer and I have the OEM code (Bought at Best Buy)
View 1 Replies View RelatedI want to shutdown other computer in our network so in CMD i type 'Net View'I see my other pc so i do 'Shutdown -i' i type pc name shutdown and then get access denied!
View 9 Replies View RelatedI have an asministrator account on both computers with the same password. I have tried to shut it down with the command itself and the GUI. It always returns with the same error: "DESKTOP-PC: Access is denied.(5)". I have downloaded psshutdown, but I don't really know how to use it.
View 9 Replies View RelatedSome time ago I installed Windows 7 32bit on my tablet (Lenovo X60t) and I have an overly sensitive shutdown button which drives me crazy!I am used to clicking on the start button, keeping the mouse button pressed down, moving the cursor over a program (icon) I want to start and finally releasing the mouse button (instead of click-release on start button and second click-release on the program icon). This works very well on all Windows machines I stumbled over.On my X60t though the shutdown button is overly sensitive and it will react instantly whenever I touch it with the cursor, even though I don't release the mouse button to perform an action! If that was too confusing: Left click on start button with mouse button held down, move cursor over shutdown button => Windows will shutdown instantly
View 4 Replies View Relatedim trying to shut down my computer by clicking on the shutdown butten but nothing is happening, i also clicked on the restart butten still no results but when i hit the hybenate button it hybenates please tell me how to fix this problem
View 2 Replies View Relatedmy laptop with window 7 OS does not shutdown when i click on shut down tab.
View 1 Replies View RelatedI believe this problem was caused by CCleaner/Revouninstaller, that's the only thing that did changes to my system before this happens. I tried searching for solutions on Google, and I found this guy with the exact same problem.(url) (Screenshot provided by him, perhaps this can help better understand my problem) Tried System Repair/Restore and Safe Mode, none worked. I followed up with a " Last known good config " option, but the problem is still there.
View 7 Replies View RelatedI have two windows updates that keep failing. When i go to shutdown my computer I always have an update icon attached to the shutdown key. The download is always 1of1. Then when i reboot, the update icon is still there. I'm thinking since the two updates are failing, it has something to do with the 1of1 update not downloading properly. I went to windows update to check for new updates, and the only one is the two that keep failing. My computer just blue screened on shutdown today, winch got me thinking i really need to fix this.
View 3 Replies View Relatedi am always getting force shut down message whenever i processed shut down process.
View 2 Replies View RelatedIm not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
View 1 Replies View RelatedUsing Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
Is it possible to hack that button so you could, say, launch a special "locking" program instead of loggoff, shutdown, or any of the other options?
View 1 Replies View RelatedNew to Windows 7 and have a question. It seems my test machines keep going into some kind of sleep/hibernate state that prevents me from VNC'ing to them. All I want is for the monitors to go to sleep after 15 minutes, but the machines to stay on. We do a lot of work during off hours, but the few test machines all seem to go night-night on me when I try to access them during those times.
Does anyone know which group policy settings I should use in order to help with my late night VNC'ing?
How to Change the Default Action of the Windows 7 Alt+F4 Shut Down Window ?
View 0 Replies View RelatedI'm having this problem. Often, when I press the shutdown button, computer runs on. There's no signal from graphics card, because monitor goes blank. But sometimes computer does shutdown (rarely).
View 6 Replies View RelatedI recently installed windows 7 64-bit ultimate using a clean install since i had windows xp. Everything installed ok. The problem I'm having is that when i shut down, it automatically restarts instead of shutting down. It runs through the BIOS and POSTS as if i restarted. There are no errors listed when it restarts. It's as if i pressed restart instead of shutdown. The only way i can turn off my computer is when i hold down my power button for 3 seconds.
Gigabyte GA-N650SLI-DS4 motherboard
intel Q6550 core2duo proc
2x500gb WD caviar black hard drives in RAID 0
XFX 8800 GTS XXX 320 mb video card
2x2gb corsair XMS2 pc6400 RAM
Linkysys Wireless G PCI Card
Soundblaster audigy2 soundcard
500W power supply
I recently bought an Alienware m17x and it keeps shutting down randomly. I tried reinstalling a fresh version of windows just to be sure and reupdating all of the drivers to match my computer's needs. (via windows update and Driver Genius)It never shuts down randomly in safe mode though, so it tells me: (Correct me if I'm wrong)
1) It's not one of the absolutely critical files causing it, since the files/drivers work without shutting down in safe mode
2) It's not an overheating problem since it doesn't shut down randomly in safe mode
3) Probably not a problem with the battery, or else it would shut down in safe mode too. (Right?)
I still have a 1 year warrenty with Alienware/Dell but I'd rather not wait several weeks (send/receive, fix, send back which takes a while b/c shipping takes atleast a week each way) for them to receive it, fix it, and send it back. (I'd prefer to use that as a last resort because I use/need my computer daily)Dell does have a BIOS flasher for Alienware m17x which I have not tried yet?
System info/specs:
-- Alienware M17x R3 Laptop
-- Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD)
-- Dell Wireless 375 Bluetooth Module
-- Genuine Windows 7 Ultimate (Alienware Edition)
-- 12 GB DDR3 SDRAM 1333MHz (4 DIMMs)
-- Processor: Intel Core i7 2820QM 2.3GHz (3.4GHz w/Turbo Boost, 8MB Cache)
[code]...
Shut down unexpectedlyFiles that help describe the problem:032811-1683201.dmpsysdata.xmlWERInternalMetadata.xml
View 10 Replies View Related[CODE]My computer is randomly shutting down power then restarts on it's own. I have tried to find a common function that might be causing this to happen. But have not found any. At first I thought it was th eIE since the shutdown always occurred while surfing th eInternet. But, I have had it shutdown once not being on th eInternet (maybe 99 to 98% while on the internet). The computer will run for days, weeks and even months before it shows up again. I have replaced the Power supply, the video card with one just like it, and rearranged the memory (3 x 2g) OCZ GoldI have run the memory test with Windows 7 and no problems were found. Where do I go from here? I have never seen the temparature exceed 42 C. The Vcore is 0.94, +3.3v is 3.33, +5 is 5.19, +12v is 12.25, CPU temp 33 C, and MB is 30C as I write this message
View 7 Replies View RelatedWhen I click Shutdown button on start menu, Windows shutsdown but leaves the computer running. Fresh install, updates installed, chipset drivers upto date. Never experienced this with WinXP on same computer. Check all other messages about same problem but no reply witsolution was posted.
View 5 Replies View RelatedLooks like something is holding it up, I reinstalled the drivers but I think it might be a software issue where a program is not exiting properly and holding the system down.Every once in a while the system will shut down but most of the time it hangs on shut down, times out and errors out.
View 1 Replies View RelatedThis tutorial will show you how to set the amount of time Windows 7 waits for programs to save data and close before shutting down. Always, as usual, make sure you save and close applications before shutting down to prevent data loss. I also recommend that you backup the registry before editing it.
View 0 Replies View RelatedI've got a problem with shutting down Windows 7 Ultimate 32 bit version, I have read through all the posts about windows restarting when shutdown is pressed or the off button is pressed on the desktop PC. I have gone into BIOS and altered the restart in event of system failure, and also done the same on My Computer in advanced settings but none have worked.I have done a check on Microsoft's website to check all the hardware and software too, and the results were all clear. Apart from Adobe Photoshop 3, when I installed this program for some reason I was unable to get an internet connection. And I had to swap my Panda Internet Security for Windows Security Essentials, which I have found out since is better than most of the top brands that you pay for; and it is free to all those people who have got the genuine system from Microsoft.I have all the latest updates for the software and drivers too, also done a full scan of the PC including the two external hard drives that I have connected to the PC.
View 9 Replies View RelatedI have a problem with my laptop (A Sony Vaio VPCEB4J0E) Basically, whenever I tell it to shut down, it doesn't actually do so and only closes Windows explorer so I'm left looking at my desktop whilst nothing happens.
View 4 Replies View RelatedEverytime I attempt to shutdown Windows 7 freezes at the "Shutting Down" screen with the little moving circle. I looked in Event Viewer and all I'm seeing is a WMI Event ID10 error:
"Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Today i am surfing internet and suddenly a screen comes (i couldn't read it because it was for just 2 or 3 sec) and then windows restart in safe mode.This has happened to For 3 times in 2 days attaching the files.
View 1 Replies View Related