Errorcode: 0x8007000D Description, The Data Is Invalid
I've recently upgraded to windows 7, and everything is running smooth and nicer than vista, but i'm been getting this notification that when windows is trying to activate, it can't. I got an activation key and everything form Microsoft for it, but i don't know what the problem is. For now its not causing any trouble, but i wonder if it will later on or not adn if i can fix it somehow?
errorcode: 0x8007000D Description, the data is invalid
Windows 7 Boot Failure - Repair Fail, Memory Fail?
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
Security Updates FAIL, Reattempt At Every Boot But Always FAIL?
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
Install XP Mode - ErrorCode 2147942413 Invalid Data Windows6.1-KB95855
I have spent two days on the web reading everything I can find on this subject and have tried many of the suggestions but simply cannot get this update to install. I even went to restore back to before downloading the two XP mode files. Virtual Machine is enabled in BIOS and the MS tool verifies that. The event viewer has many red errors and some of them say ....Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:Windowssystem32wusa.exe" "C:Windows6.1-KB958559-x64-RefreshPkg.msu" ")I am running Win 7 Pro 64 bit with SP1 and all updates since 1-1-11. The Mobo is ASUS M5A88-M with AMD FX-4100 and 8Gb RAM. So far this is the only problem I have been having with software and the PC was put together last weekend.
ErrorCode 0X80070035 "Network Path Cannot Be Found"?
"Error code: 0x80070035 The network path was not found" when trying to access any network shared drives. Our file server is a windows server 2003 standard edition.This problem occured yesterday on my laptop with OS windows 7 pro. I cannot access any shared folders, shared drives. I cannot access my own laptops shared folders. I can see the device on the network and can connect to my laptop and access files on my laptop from other pc's. I have checked all the services required and they are started, netbios over tcp/ip is enabled, network discovery is turned on, windows firewall is turned off and also tried disabling the antivirus on the laptop but none worked. Also tried the system restore, which did not allow me to log back into the domain giving error " Trust relationship between this workstation and primary domain failed". So had to undo the system restore.
Unable To Initialize?
i have several programs that will not run properly and not sure why. Firefox says it cannot initialize the applications security component. i have tried the way that the firefox support has said to fix it with no success. so does anyone know what i have done to make several programs not start?
Cannot Initialize USB Hdd?
I have several old Western Digital hard drives with many files on them. I tried to access those files by connecting the hard drives using a IDE/SATA-to-USB connection that I bought for this purpose. The instruction said to put the jumper in the "Master" position.The HDD did not appear in Windows Explorer. However, the IDE/SATA-to-USB is recognized by Windows 7 and the hard drive appeared as "Disk X" in Control Panel's Disk Management with a note "not initialized". The HDD was spinning. Under "Volume" it also said not initialized. So, I tried to initialize it and a screen appeared with a check mark on MBR type. When I click "initialize" an error appeared "Device not ready".I changed the jumper settings but with the same result.The same results when I connected these HDDs with the IDE/SATA-to-USB on a another computer with Win XP SP2.What needs to be done?
Could Not Initialize Graphics System?
Was the message i got when i tried to play my freshly installed age of empires II game (with expansion). i have cruised the internet for solutions for my computer, i have re-installed game, done the whole compatibility pack stuff (including disabling themes and 256 colors stuff). i have updated driver and adapter, turned off adapter, changed screen size, done off with aero pointers and what not and i have run as administrator the whole time. i have also updated direct draw and ran dxdiag.exe thing, here it is[CODE]
Failed To Initialize 3d Rendering
Failed to initialize 3d rendering.What will i do? I speak english bad. More games doesn't open. Standart games too doesn't open.I installed the drivers for my notebook Asus g50vt,and DirectX,but it doesn't help.
Unable To Initialize Installer GUI
I have been unable to solve this riddle. It appears tohappen when using web dowloaders, and with me happens only with Cnet Downloads!!! I have even tried going direct with CBS to no avail!
Webcam Application Fails To Initialize
I am having problems with my Web Cam all of a sudden. When I click on it it says "Application failed to initialize check camera device and restart computer" I tried downloading a new update from Toshiba but the application never installed. I have a Toshiba Satellite L655-S5150 Windows 7, Laptop that is only 15 months old (thankfully I have the extended warranty, but who wants do a re-install?Previously, I installed the Kingsoft Antivirus and had it for a while with no problems, but I see this antivirus update has many new features and one of them is blocking my Webcam. I have since then unchecked the "block this program" for my webcam, but am still having non access to my webcam I can't use Skype or You-tube. What can I do to get my Web Cam up and running. After I unchecked the "block" box I was able to access my web cam for a short while, then once I rebooted no more webcam.
system 32, service pack 1, build 7601 Toshiba Web camera software 22.214.171.124
I looked in the Device Folder and didn't even see the Toshiba Web Camera Application or Device. Some people says to uninstall the device then re-install it, but I can't even find it.
Blue Screen Error When Program Initialize
occurs a lot of times when i switch on the laptop n when the start programs are still initializing. And a few random times too when i'm playin a game or just browsin in mozilla.
Windows Cannot Initialize Device Driver For Hardware
I tested a friends graphics card in my homebuilt computer to see if it worked. I took my Ati Radeon 9800 Pro out, and put in this other card, and then replaced the other card back with my Ati Radeon 9800 Pro. Since then, I cannot get the drivers to work again for my 9800. I have Windows 7, 32 bit. I am positive that I did a fresh install of windows 7, not an upgrade. I cant remember if I installed specific drivers for my graphics card at that time, or if windows did it. All I know is that the card was running good, with two monitors running together. Everything stopped working after I tried my friends card out.
Ive downloaded so many Ati Catalysts, 10.2, 9.3, 9.1, 8.7, 8.1, and also different versions (XP and Vista) and none of them will work. Sometimes it will just say "The current driver is up to date" and its showing the standard VGA graphics adapter. Sometimes it will say "Radeon 9800 PRO installed, reboot now" then when I reboot, it will give me this error "Windows cannot initialize the device driver for this hardware. (Code 37)" when I check device manager. Basically any driver I try will give me this error.Basically what I was doing was boot into safe mode, use DriveSweeper to delete all ATI files, then reboot and install different catalyst, then go through device manager to "update driver". Then I would get the error above.
Data Recovery - How To Initialize Drive / Unable To Access
My power supply on my old comp died, so it was time to upgrade computers, I went from running windows XP to windows 7 now. I saved my old "previously upgraded" 320g wd internal drive to recover the data to my new machine. I got an external drive enclosure, installed everything but windows is telling me I don't have "access" to the drive. When I go into disk management, it sees the drive but it's not initialized, nor will it let me initialize it when I try.
User With Non-admin Rights Can't Initialize Drive?
Run-as local admin doesn't quite work. I also started the initialization process then gave the drive back to the user to finish formatting in NTFS. However, the HD is 2 tb and he only got to 10 mb before Windows 7 quits and shoots failed error.
If Go To Initialize A Drive There Is Only 2 Enable Option Delete Volume
i am having 2 drivers in my system window 7 o.s. but after installing of another o.s i.e linux mint 12 i lost my main data driver partition. but dat lost driver is present in disk management, but it not able to perform any operation over that , it is having 2 enable operation i.e delete volume and help and i dont't have to delete that volume.
DWM.exe Won't Initialize, Error Code 0xc000007b
I just got my laptop back from best buy, they had to replace a fan and apparently re load windows 7. All was fine and I began running windows updates. Eventually, the computer, while booting got hung up on one update (fatal error code c000003a). I restored the system to the earliest date and finally got to log on. Everything seems to work great now, except I noticed the windows aero theme was disables. I Hit the find out what's wrong with aero button and it didn't return any results. I also checked "services" and saw that"desktop manager session windows manager" was started and set to automatic, but when I click that and hit restart service, I get the same error. Before I got this error, I got a different one that said I was missing "dxgi.dll", I downloaded that and put it on my system32, just though I'd let you know. I'm running windows 7, home premium 64-bit.
Unable To Initialize External HDD In Disk Management Due To I/O Error
I'm running Windows 7 Ultimate 64 bit.Windows detects my external HDD but doesn't show up in My Computer. Drive is detected in Disk Management, indicated as "not initialized". When I try to initialize the drive, it gives me the following error,"The request could not be performed because of an I/O device error".What I've tried doing:Do a clean instll of windows - Don't work Uninstall external HDD driver, turned off power, turn it back on again, reinstalled driver - don't work Tested the same external HDD on another Windows 7 system - No problems, detected and able to access Tried plugging on different ports - Don't work.
The Application Failed To Initialize Properly (0xc0000142) Click On OK To Terminate The Application
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
Dell Inspiron 545 Operating System: Windows 7 Home Premium 64bit, Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz Memory: 6.00GB Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
"Could Not Initialize Graphics System. Make Sure That Your Video Card And Driver Are Compatible With DirectDraw"
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.