Directx 9 For Windows 7 - "Failed To Initialize Direct 3D"
Oct 15, 2011
i got a new game (i.e)icc cricket world cup 2011,when i try to play i am getting error as "Failed to initialize direct 3D!make sure you have direct x9 insalled and are running a graphics card that supports pixel shader 1.1"
Failed to initialize 3d rendering.What will i do? I speak english bad. More games doesn't open. Standart games too doesn't open.I installed the drivers for my notebook Asus g50vt,and DirectX,but it doesn't help.
I have been receiving this error message 'The application failed to initialize properly (0xc000007b). click ok to terminate the application'. why is this happening? the only cure i found was to reinstall the program but when i restart my computer it happens again.
I've installed the latest drivers for each. When I try to play a game I get the error stated in the thread title. I have also tried deleting and reinstalling the drivers. I've looked on several forums for this error message and possible solutions.
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
One of the hard disks suddenly failed to initialized. The first problem I found on this disk was unable to open one of the zip files then the machine crashed. After I restarted the machine the HDD drive was missing from the Computer. My computer has 6 hard drives including the missing one. One is Corsair SSD for the OS and the rest are Samsung, Hitachi and WD all of them are 1TB. When I checked on the Device Manager the Drive is there and the device status is properly working. I checked on the Disk Management and I got a message to Initialize the Disk then I followed the instruction. Again I got an error message " Virtual Disk Manager - The system cannot find the file specified." On the Disk Management windows the status of the Disk is "Unknown 931.51GB Not Initialized- Unallocated". I tried to initialize but the same error I got. I did not name this drive but it named automatically RV 01 and the Location is 0.I use Acronis Disk Director to fix the problem but it cannot change the status to online. What I did last week was I installed some programs to the Drive X instead of Drive C.My computer OS is Windows 7 64bits all the drivers and software are updated.
I *WAS* having this problem trying to play RIFT Beta, however, a quick search of your forum gave me just the answer that solved my problem. The launcher would start, then I would click play, and a directx update window would open, when I clicked the next button on the installer for directx (the window did not provide a version), I would get the error box telling me to look in my directx.log file, which contained many lines of error code about missing cab files. I then used the link provided in a closed thread on this forum that took me to the Microsoft Directx software page, I downloaded the latest rev of the runtime sdk kit, after 6 minutes of installation, RIFT launched perfectly. I have Win7 home premium 64bit running on a standard shelf version of an hp box with intel i3 core and intel onboard video... Here is the link I used: [URL]
could someone help me on this. a few days ago i upgraded From XP to Windows 7 Beta 7048.
and i have not been able to successfully install DirectX9.0c. over the already installed DirectX 11. has any one else experienced this problem. with Windows 7 beta 7048. because since i installed Windows 7 on my computer.
i am not at all able to play any DirectX 9.0c or DirectX10 PC Games. each time i attempt to install Directx9.0c during installation it is not able to complete. or even start installing. on the windows 7 beta 7048 could someone help explain what i need to do to get this working.
properly also i have an ATI Radeon HD3650 if that helps any.
I have direct x 11 installed in my pc but my game CIV V does not let me play in DX11 which it did before for some reason it only lets me play in DX 9, also other games look like they are controlled by DX9 but my pc says I have DX 11 installed?
I tested a friends graphics card in my homebuilt computer to see if it worked. I took my Ati Radeon 9800 Pro out, and put in this other card, and then replaced the other card back with my Ati Radeon 9800 Pro. Since then, I cannot get the drivers to work again for my 9800. I have Windows 7, 32 bit. I am positive that I did a fresh install of windows 7, not an upgrade. I cant remember if I installed specific drivers for my graphics card at that time, or if windows did it. All I know is that the card was running good, with two monitors running together. Everything stopped working after I tried my friends card out.
Ive downloaded so many Ati Catalysts, 10.2, 9.3, 9.1, 8.7, 8.1, and also different versions (XP and Vista) and none of them will work. Sometimes it will just say "The current driver is up to date" and its showing the standard VGA graphics adapter. Sometimes it will say "Radeon 9800 PRO installed, reboot now" then when I reboot, it will give me this error "Windows cannot initialize the device driver for this hardware. (Code 37)" when I check device manager. Basically any driver I try will give me this error.Basically what I was doing was boot into safe mode, use DriveSweeper to delete all ATI files, then reboot and install different catalyst, then go through device manager to "update driver". Then I would get the error above.
I have several old Western Digital hard drives with many files on them. I tried to access those files by connecting the hard drives using a IDE/SATA-to-USB connection that I bought for this purpose. The instruction said to put the jumper in the "Master" position.The HDD did not appear in Windows Explorer. However, the IDE/SATA-to-USB is recognized by Windows 7 and the hard drive appeared as "Disk X" in Control Panel's Disk Management with a note "not initialized". The HDD was spinning. Under "Volume" it also said not initialized. So, I tried to initialize it and a screen appeared with a check mark on MBR type. When I click "initialize" an error appeared "Device not ready".I changed the jumper settings but with the same result.The same results when I connected these HDDs with the IDE/SATA-to-USB on a another computer with Win XP SP2.What needs to be done?
i have several programs that will not run properly and not sure why. Firefox says it cannot initialize the applications security component. i have tried the way that the firefox support has said to fix it with no success. so does anyone know what i have done to make several programs not start?
I am currently not having any issues with XP and everything is working fine for what I use this computer for. That being said and considering my set up is an upgrade to Windows 7 worth it? Is Windows 7 really that big of an improvement over XP? The only thing that is even making me consider an upgrade to Windows 7 is for the chance to use DirectX 11.However, I've read that some older setups are having a hard time getting Windows 7 to work correctly because many of the necessary drivers needed for the computer to operate correctly are no longer supported. I know for a fact the last updates that were released for my BIOS and my motherboard chipset were in 2006. Will they even work in Windows 7?
I am trying to download the ISO files of win 7 ultimate ect without having to use torrent.I have found this site listing them all with direct download links..Is this a trust worthy site? and how do I verify that they havent been modified compared to ones at msdn?(by the way, I'm not trying to download them for illegal reasons, Its because I no longer have the CD's but do have legit product keys
Was the message i got when i tried to play my freshly installed age of empires II game (with expansion). i have cruised the internet for solutions for my computer, i have re-installed game, done the whole compatibility pack stuff (including disabling themes and 256 colors stuff). i have updated driver and adapter, turned off adapter, changed screen size, done off with aero pointers and what not and i have run as administrator the whole time. i have also updated direct draw and ran dxdiag.exe thing, here it is[CODE]
I just got my laptop back from best buy, they had to replace a fan and apparently re load windows 7. All was fine and I began running windows updates. Eventually, the computer, while booting got hung up on one update (fatal error code c000003a). I restored the system to the earliest date and finally got to log on. Everything seems to work great now, except I noticed the windows aero theme was disables. I Hit the find out what's wrong with aero button and it didn't return any results. I also checked "services" and saw that"desktop manager session windows manager" was started and set to automatic, but when I click that and hit restart service, I get the same error. Before I got this error, I got a different one that said I was missing "dxgi.dll", I downloaded that and put it on my system32, just though I'd let you know. I'm running windows 7, home premium 64-bit.
I am having problems with my Web Cam all of a sudden. When I click on it it says "Application failed to initialize check camera device and restart computer" I tried downloading a new update from Toshiba but the application never installed. I have a Toshiba Satellite L655-S5150 Windows 7, Laptop that is only 15 months old (thankfully I have the extended warranty, but who wants do a re-install?Previously, I installed the Kingsoft Antivirus and had it for a while with no problems, but I see this antivirus update has many new features and one of them is blocking my Webcam. I have since then unchecked the "block this program" for my webcam, but am still having non access to my webcam I can't use Skype or You-tube. What can I do to get my Web Cam up and running. After I unchecked the "block" box I was able to access my web cam for a short while, then once I rebooted no more webcam.
system 32, service pack 1, build 7601 Toshiba Web camera software 184.108.40.206
I looked in the Device Folder and didn't even see the Toshiba Web Camera Application or Device. Some people says to uninstall the device then re-install it, but I can't even find it.
My issue is that I have a usb device that when connected to my Windows 7 machine works just fine, however, when I connect it to a usb hub it does not. When connected to the hub, the device is detected by windows and goes from unknow device to the actual device name and the light on the device lights which it doesnt do if not installed properly.Has anyone else seen anything like this? Its not that the hub isnt working or that the device cannot be installed. Programs that interact with the device simply cannot when the device is hooked up to a hub.
is it possible to somehow partition a NEW CLEAN hard drive and copy windows installation files from mounted iso and make that partition bootable to install on a different partition on the same NEW/CLEAN hard drive? on a different PC? its cuz im a tech and i left all my flash drive and cd's somewhere else XD and i gotta install =P i pretty much want to be able to put the hard drive into the new pc and have it boot to the disk and install to the same.
I have some trouble to connect to my camera IP (E50 Ranger-SICK IVP). I was on windows XP before, and everything was going well. Now that I have a Windows 7, I can't set up the configuration of my pc to connect to my camera.What I have seen is that after setting my configuration in Windows 7 as in the XP's OS, I have got a No network access. I can't either ping my camera and my computer itself using is its IP.My camera IP is 192.168.0.5.On XP, I have set up only an IP adress and mask (192.168.0.2 & 255.255.255.0) and it was working correctly.