Can't Get Passed The... "To Install Device Drivers To Access The Hard Drive?
Feb 23, 2012
I have an Asus M2N-E SLI motherboard, a W.D. SATA WD300HLKS hard drive, and a SATA DVD R/RW.I'm trying to install Windows 7, BUT I can't get passed the... "To install device drivers to access the hard drive, insert media.................... ..... Press OK to continue. If I hook up a IDE drive it will find that. I've tried for hours to find a solution and/or drivers. Tried Asus, NiVidia, Western Digital,
So, I order a new custom computer and want to install my two old hardrives from my current computer. Both hardrives have lots of programs and info on them. The main on has windows 7 32 bit installed plus several programs. The new computer will have windows 7 64bit. Is it possible to install the old hard drive and access all the programs and files on it even though it has an operating system on it? Can I just transfer all those programs and files from the old one and reformat it to free space or is there a way to just remove the operation system and still access the the files and programs?
I was wondering if it was possible to access a different hard drive on a computer via the network option on windows? All the computers on my home network are windows 7 and i'm always accessing stuff from a desktop file on my main computer to my laptop or onto my flat mates laptop/computer. I'm upgrading to a solid state pretty soon and hoping to put windows on my SSD and have all my files i'm usually sharing on my 2nd hard drive due to not having much space on my SSD. Is there any way to access a hard drive on your network that doesnt have windows 7 on? So I can access my files on my second HDD on my PC from my laptop. Normally all I can see is "Jon-PC" and that accesses the C: windows drive
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
I've spent most of the night searching and cannot seem to find an answer to my problem.I have a NAS set up with two 2TB Samsung Spinpoint hard drives. The hard drives in the NAS were partitioned to have 300GB in a RAID 1 and the remainder in a RAID 0. One seemed to be failing so I removed it hoping I could connect it externally to my laptop and recover the data. When I hooked it up to the laptop, it seemed to connect fine but did not show in My Computer. When I went to Computer Management - Disk Management, it shows the partitions as healthy (see image - Disk 1). However, when I right click on the partitions to assign a drive letter, the only options available are Delete Volume and Help. Same when right clicking the Disk 1, all that is available is Convert to Dynamic Disk, Properties,
I just did a new build and i put my 2 storage drives from my old PC in it and installed windows on a new crucial M4 ssd.When i try to open the storage drives under my computer i sometimes get a green progress bar that takes a bit to load. I tried turning indexing off, setting folder type to general n so on and the problem still occurs. I also noticed with winamp that when i click on it and scroll down and it has to load the duration of the songs winamp becomes unresponsive for a few seconds. I use PS3 Media Server to watch my video files on my TV and it also is laggy compared to before. It takes a good 10 seconds to load the list of files and takes a while to load a file when before it was instant.
Linksys/T-Mobile Hot Spot (wireless) ROUTER with Ethernet connections to
1) Home Phone, 2) iMAC PowerPC/OS X Leopard, 3) PC/Windows 7 32bit and 4) IOMEGA HOME MEDIA NETWORK HARD DRIVE (herein "NHD").
PERTINENT SYSTEM STATUS:The NHD contains 1) a "BACKUPS" folder with sub-folders containing scheduled & unscheduled backups and system images from both computers and 2) specific folders e.g. MOVIES.Upon attempting to open the "BACKUPS" folder on the NHD from the PC, a WINDOWS SECURITY panel opens 1) requesting a user name and NETWORK password to the NHD, 2) listing the PC name as a DOMAIN name and 3) a red "X" - Access Denied.
1) As User/Administrator, I have not set any "folder" security/passwords,
2) I can open, view, edit and delete any of the other folders on the NHD from the PC and can open, view, edit and delete ALL folders from the iMAC , 3) I have NO domain setup, only a WORK GROUP name, 4) Network access protection is OFF.
after plugging in the external hard drive after a while I get you need to format the disk in F:\ do you want to format?After a while throws another warning saying F: is not accessible, Data error (cyclic redundancy check)It was working well until last week but then suddenly started giving this error message.
So, I recently picked up this external hard drive from a friend, who was having some issues with it. From his first description I thought I would be able to solve it myself, but i1-The Hard drive, is a standard external one connected to the PC via a standard USB cable ( One regular USB connector on the PC side and a small one, I believe they are refered to as 'mini-USB Type B' on the drive's side).2-When connected to the PC it shows up like an internal hard drive, strangely, not with the external devices.3-It cannot be browsed or accessed in any other way, the windows explorer will either, load -extremely- slowly, without success, OR freeze OR simply say it cannot be accessed.4-The furthest I got in terms of interacting with it, was to uninstall and reinstall it via disk manager.
5-All other attempts fail, formatting is impossible as a right click leads to the problems described in point 3. (I tried to format after uninstalling/installing the drive, since a message came up telling me to do so, eventhough I was planning to do it anyway)6-The drive brand is completely unknown to me, it was purchased in Hong Kong and bears the label 'Buffalo'.
I cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
I can see a generic storage device listed under the universal serial bus controllers in the device manager and am able to see the 'safely remove hardware' icon in my tray. Unfortunately, the only thing that I see in disk management is an 'unknown' disk. The hard drive is listed by manufacturer in the device manager; however, I am not able to open it from this site. And, when I look at the items 'attached' to my computer, the drive is not visible.
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64 Motherboard: Gigabyte GA-Z77X-UD3H Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
I was normally using my computer, when I suddenly noticed one of my hard drives disappeared from My Computer. Checked the Device Manager, I get the following. Trying to initialize it throws up this error: Seems to spin just fine. Trying different USB ports failed, switching cables as well. Already tried a few programs. GetDataBack for NTFS throws up error 1117. R-Studio also fails, as does DMDE and MTY. My friend even borrowed me Microsoft DaRT (part of MDOP), but when I boot into it, it doesn't recognize the HDD at all, no matter how hard I try. Only my Windows 7 installation does.Anything I can do in this situation? I had a lot of important data on it, and it's not completely dead yet. Maybe I can still save it somehow, without haivng to pay one of those data recovery thieves...
I have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
There is a unknown 'portable' device (F:/) on my computer which I dont recognize. I saw it when I was about to scan my computer with Norton and was about to select which drive I wanted to scan, if I show hidden files it also shows up under My Computer, but I cant access it.... What could cause this?
I have recently had to ditch my old computer windows xp, and bought a new Dell running windows Hoem repmium 7 (64 bit). I had a 32 bit ide external hard drive and had backed up my files there. Having got the enw copmpouetr set up I am trying to access my archived files on the 32 bit to transfer to new hard disk, but am unable to do so. Windows explorer locks up.
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
i had a virus and used norton to clean out and laptop went to blue screen and then started norton recovery, since then i cannot access the hard drive in the laptop or via a caddy. just says unable to load driver..
I have a 3 Tera HDD. (WD My Book Essential (USB 3.0)). Last night I uninstalled a software which I do not remember its name by mistake. Apparently it was related to my WD hard drive for my computer does not recognize it anymore. I checked my device manager; "Base System Device" is not recognized. I ran windows troubleshooting. It says "Base System Device" Driver is not found. I searched a lot, but I couldn't find the driver. I also ran drive checker software.
It says: Device name: JMB38X SD/MMC Host Controller File name: MSI_GX633_Card For Windows 7.zip Hardware ID: PCIVEN_197B&DEV_2382 I could not find this too. I also have another portable WD which is still recognized by my computer.
This morning while i was watching a movie from my Toshiba 500GB external hard drive, there was a windows update going. Because of the lagging due to the update and all, I restarted it after the update is done while my ext. HD is still connected to the computer.
After restarting, somehow I can't seem to access my ext. HD even though the HD is detected. The HD somehow became a "Local Disk K:" and everytime i try clicking it a pop-up telling me that "K is not accessible. The parameter is incorrect".
I googled the problem and found one solution that told me to run a CHKDSK on the command prompt. I ran a "chkdsk /r K:" but then got stuck on the "stage 3 of 5" where the chkdsk is verifying Usn journal. This has been going on for 5 hours and the cursors still blinking.
I can access my HD again? Does the verifying Usn journal really do take this long?
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
Linksys/T-Mobile Hot Spot (wireless) ROUTER with Ethernet connections to 1) Home Phone, 2) iMAC PowerPC/OS X Leopard, 3) PC/Windows 7 32bit and 4) IOMEGA HOME MEDIA NETWORK HARD DRIVE (herein "NHD").
PERTINENT SYSTEM STATUS:The NHD contains 1) a "BACKUPS" folder with sub-folders containing scheduled & unscheduled backups and system images from both computers and 2) specific folders e.g. MOVIES.
THE PROBLEM:Upon attempting to open the "BACKUPS" folder on the NHD from the PC, a WINDOWS SECURITY panel opens 1) requesting a user name and NETWORK password to the NHD, 2) listing the PC name as a DOMAIN name and 3) a red "X" - Access Denied.
CONFLICTS & FACTS:1) As User/Administrator, I have not set any "folder" security/passwords, 2) I can open, view, edit and delete any of the other folders on the NHD from the PC and can open,view, edit, delete ALL folders from the iMAC 3) I have NO domain setup, only a WORK GROUP name, 4) Network access protection is OFF.
UPON SELECTING "BACKUPS" FOLDER PROPERTIES ON PC: General Tab: ♦File Type > Share Network Tab: ♦Computer Name > the NHD ?? ♦Computer Type > Windows NT 4.9 Server ?? ♦Work Group > "WORKGROUP" (Control Panel System Info shows true Name) Security Tab: ♦Object Name > \Iomega-....Backups "You do not have permission to view or edit this object's permission settings." Previous Versions Tab: None
I just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.
I have a network hard drive mapped as Z: which I have become unable to do ANYTHING with. I can't delete anything, change anything, or add anything to the drive. I just get that blasted "Destination folder access denied. You need permission to perform this action."
The internet has provided me with a plethora of solutions to this issue, and none of them have worked. I'm logged on as administrator. User Account Control is totally off. Windows 7 will allow me to neither change permissions nor ownership of Z: or any folder or file within Z:.
I try giving Full Control to Everyone and it says "An error occurred while applying security information to (file name). Access is denied." I go into Advanced and click the Owner tab. It states the current owner of everything on Z: is "nobody," and if I try to change the owner, it says "Unable to set new owner on Z:. Access is denied."
I've tried going into command prompt and changing ownership using "takeown /f Z:" and I just get "Z: Access is denied."
I am using Windows Seven ultimate x64 and I started having a problem when trying to access user's folder under documents and settings or users on any attached external hard drive on my computer. i didn't have this problem before, it started on the same installation of windows and without any changes to my system settings or user settings. I am a computer tech and I use my computer to backup data before repairing computers so I attach the hard drive to my computer using a USB enclosure. This is limiting my work since I didn't find any solution yet. It's giving me the error below: "you don't currently have permission to access this folder" This is happening on any external hard drive I want to access the user's data.
