Windows 7 X64 Ultimate & Gtx460 Unable To Go Past 1024x768?
Sep 8, 2012
couple days ago, I boot my system up and I'm shocked to find my resolution @ 1024x768 when it's supposed to be 1440x900, as that's the max for my monitor.Well, I tried rebooting, tried uninstalling/reinstalling the drivers, downloaded the most recent drivers from Nvidia and uninstalled/reinstalled again...still same issue.I finally got fed up and decided to reload windows fresh. Formatted my partition and went through the setup process. After all was said and done, reinstalled Nvidia drivers for my card and the same damn issue was still there.So, am I correct in assuming that, for what ever reason, my video card has crapped the bed on m
View 4 Replies
ADVERTISEMENT
May 14, 2009
I have Windows 7 RC Build 7100 x64, and my 15 inch Compaq CRT Monitor can not go past 1024x768 in windows 7, but in windows XP and Windows Vista, im able to go all the way up to 2048x900 57 hz, ive tried upgrading drivers, using a DVI-to-VGA adapter to use the DVI port with my vga monitor, and clearing the checkbox that hides the higher resolutions, but, i still cannot go any higher than 1024x768,
which is too low of a screen resolution for me, so, please help, ive also tried using vista drivers from 2008, but still a no-go, so im out of ideas, if theres a way to fix this, or this is unfixable for the time being, ill stick with XP, so please let me know.
View 4 Replies
View Related
Dec 1, 2011
Today, there was a power shortage while my PC was on. Quickly, after it happened, I turned off the PSU and the Surge Protection in fear something might have happened there.After the power came back, I turned everything on again and started Windows.It booted normally, no strange sounds nor other stuff.My PC has only 1 user (me) so there's no User Panel. It automatically went to loading Windows.The problem started here. Windows would load my wallpaper and Task Bar (I dunno how it's called in English, it's the one with the Windows Button), but no programs nor the icons would load. It's stuck there.I have tried CTRL+ALT+DEL, but there was no response (actually, there was, an error message saying Windows wasn't able to show the user panels and power panels, and that I should reboot my computer manually).After some time, I was able to get into Computer. My 3 partitions were there (2 HDDs, 1 for OS and another partitioned in 2) but I couldn't access them.
View 6 Replies
View Related
Jul 7, 2012
While watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies
View Related
Aug 30, 2012
ago my computer driver began crashing when there was high pressure on the graphics card. formatted and it seem like it did the job, after that i went to a vacation for 4 weeks , now im back like 1 month and about since then i had constant gpu crashes [and that massage that says the driver restored]. checked every where, installed 5 diffrent drivers [all whql verified] , finally i decided i was tierd of the crashing and i layed my computer on my desk so i can easly access the inside.when i turned it on, it worked perfectly, when i make it stand, its unstable agian [its fine when i push the graphics card upwards] . now the computer is laying aside and everything seems to be fine.i have the graphics card screwed to the case.[CODE]
View 8 Replies
View Related
Feb 10, 2012
My wife's laptop broke down a few months ago, and we wanted to get some files off of the hard drive. I grabbed an extra eSATA cable and connected it to an extra port on my desktop motherboard... without remembering to connect it to the power supply. Anyway, when I booted up the machine, I was unable to get past the BIOS, getting an error message "Keyboard Error or No Keyboard Present". Even after shutting down and removing the hard drive, I'm still getting this error message. We've tried a number of different keyboards and it's coming up the same every time.
View 7 Replies
View Related
Jan 15, 2013
I'm using a dell inspiron 1440 laptop, recently replaced my internal hard drive with a new solid state drive. It was working fine until today when I tried to boot my laptop up, and it gave me a BSOD before reaching the "Starting Windows" screen. Subsequent attempts at selecting the Startup repair and start windows normally options only gave me "failed to repair", and the windows logo getting stuck respectively. Safe mode cannot be started. However, when I tried to launch startup repair from my win 7 installation disk, I found that my HDD is not detected by my laptop. Subsequently, my laptop has also told me to reseat my hard drive. I reseated it a few times, but it did not solve the problem. Diagnostics ran on my laptop did not identify any problems.
View 3 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following:
"Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 5 Replies
View Related
Nov 16, 2010
Could not install windows 7 ultimate.Had first formatted hard disk. Started window on disk and has gone through all the steps except the last. Fail at one of the reboot during installation.
View 3 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following: "Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 6 Replies
View Related
Mar 29, 2011
I'm trying to install Windows 7 Ultimate, 64-bit on my desktop. I reformatted the harddisk and booted to the DVD. I've already checked the compatibility and was previously running Windows 7 Ultimate, 32-bit. In the computer properties, it did say that the processor (AMD Athlon 64x2) is capable of running 64-bit. When I boot to the DVD, it goes through the process and seems like it is working, but after a few automatic reboots, it just black-screens. At that point, if I reboot, it just black-screens again it.I am able to put 32-bit back on it, and it installs without problems, but am trying to get it setup to run SharePoint dev tools. Is there something additional I need to do to install 64-bit that was running 32-bit?
View 1 Replies
View Related
Apr 22, 2011
im not able to install .net framework in windows7, im trying it frm past 2 weeks but im unsuccessful
View 1 Replies
View Related
Oct 26, 2012
I am unable to install programmes on my windows 7 ultimate.
View 3 Replies
View Related
Dec 30, 2011
Today is the first time I have had to access my work pc remotely so went out and bought Windows 7 Home. I accessed my works VPN network via the browser (have an icon in my taskbar called "network Connect" which tell me how long I have been connected for), I was able to ping my work PC but when I tried connect via Remote Desktop I was getting an error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote Access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
View 3 Replies
View Related
Jun 19, 2010
I have windows 7 ultimate and for what ever reason when starting my laptop (HP DV62114tx) Im being requested to enter in the bitlocker key. Now here is the issue, the bitlocker key is on the desktop. (silly me)
Im wanting to know if there is any way to either retrieve the key or is there an over ride code for bitlocker so I can log in to my laptop.
I think moving forward, I will not use Bitlocker or look for an alternate solution, that is once I get the Laptop running again.
View 12 Replies
View Related
Apr 16, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 9 Replies
View Related
Mar 4, 2011
Few days ago I caught a virus (at least I believe I did)... Used Malwarebytes and found 7 infected files in my Windows Folder. The first few syptoms of my OS was the resolution of the screen changed to 1024x768 (it should be 1920x1080) and is stuck there. The refresh rate changed from 60Hz to 59Hz, when I tried to change it back, the screen just flashes black but the tab still says 59Hz. So I reinstalled Windows 7 with the upgrade option from the OS disk, hoping to fix everything. But it didn't...
My bios was also messed up, everything was reset and edges of my screen was cutten off. The booting animation of Windows 7 is now changed to the Vista's booting animation. I reflashed the bios and that fixed that, now I've done a clean install of Windows 7, formating C: then installing. But all problems still persists... even there is no more virus found by 5 anti-virus programs. I'm still stuck in 1024x768, Windows 7 thinks my hdmi cable is apparently a dvi cable, the refresh rate is still 59Hz, the booting animation is the Vista's one.
View 9 Replies
View Related
Aug 3, 2011
I have a HPVP15 that is 15". My laptop LCD "broke", and I am using this as my primary display. I am absolutely positive that I could get a higher resolution on this monitor as it is clearly close to the same size to my 15.6" LCD display on my laptop that gets 1366x768.
View 5 Replies
View Related
Sep 9, 2012
When I try to play a game called F-22 Total Air War 2.0 I get an error which says that the resolution 1024.768 is unsupported by the harware.. so I look into my desktop options and it looks like there is an option for 800x600, 1024x600, 1152x648 and higher wide screen resolutions but the 1024x768 is gone? I did play the game yezterday, I disconnected the HDMI, got upstairs, played a few more games, came back downstairs, plugged in the HDMI, launched the game and bam I got the error! I have a ATI Radeon Mobility HD5470 and the newest ATI Catalyst Center downloaded 3 days ago. How can I 'enable' the 1024x768 resolution again? Without it I can't play the game on my Big TV and I will be stuck with my little laptop screen.
View 8 Replies
View Related
Dec 19, 2009
So I recently just hooked up a 2nd monitor to my computer just to play with it. Unfortunately, it will not go above 1024x768. I would like to set it to 1280x1024. The monitor is a Digimate DGL20, it's an LCD that was made back in 2005. The screen's max resolution might be set to 1024x768, but if that's so its there anyway i can set it to 1280x1024?
View 6 Replies
View Related
Dec 9, 2011
Today I purchased a new laptop for school. Upon starting it up i was prompted to update my drivers then to restart my computer. So I did. Now my resolution has changed from the highest being 1366x768 (I believe it was 768) to 1024x768. It wont let me go any higher and everything looks sort of stretched out. It's an ASUS model: X53U
View 1 Replies
View Related
Dec 6, 2011
I've had this driver running on all 6 of the Dell laptops I've had over the years, and never seen this.
I just had the screen die on this laptop, so I've plugged in a monitor. But the only two resolution options are 800x600 and 1024x768. I've reinstalled the Intel driver a few times, and while it's installing, the screen flashes to the proper native 1280x1024 resolution for a brief moment, but then never offers it as an option when done.
I had partial success when I uninstalled the driver, allowing the default windows driver (vgapnp.sys) to take over. It gave me access to a wide range of resolution settings, but prevented standby/hibernation, and had no OpenGL support. Then it would be overwritten automatically by Windows with some other copy of the GMA driver every time I would restart. So it wasn't really working out.
I've now reinstalled again, and I'm hoping someone knows of a way to force the correct resolution. There must be a way. How could one of the most ubiquitous graphics chipset/drivers in existence be this broken?
By the way, this is a Dell D520 with a T7200, 4GB RAM, and 945GM chipset.
View 5 Replies
View Related
Sep 5, 2012
So today when I booted up this computer the screen resolution had suddenly changed to 1024x768. When I went to change it back (my monitor is about 20 inches in size, so that resolution looks really bad) I found that I couldn't get a resolution higher than that, and the only other resolution available was 800x600. I've been trying to fix it-I restarted, tried to do a clean boot (which didn't do anything when I first restarted so I stopped trying), updated the nvida driver to the latest version, but nothing works. I thought it might have something to do with a game, because I got Fall of Cybertron just yesterday, which didn't cause any resolution problems when I played it yesterday but it could have been the culprit, but they're all limited to the same resolution settings too.
I'm running the 32bit version of Windows 7 and this is what my screen resolution menu looks like.
View 2 Replies
View Related
Oct 28, 2009
I have a sony Vaio VGN-SZ4XWN/C and recently installed Windows 7. Installation was fine, however the screen resolution does not go past 1024 x 768. The monitor is wide screen 1280x800 so would have hoped for this option.
I have tried these drivers
NVIDIA DRIVERS 179.48 BETA
and it does not recognise the hardware
and this option from another post, which does not work
Vista drivers and utilities Sony Vaio SZ available | Trevin Chow
The Graphics card is NVDIA GeForce Go 7400 GPU.
any thoughts?
View 6 Replies
View Related
Dec 8, 2009
i just upgraded to windows 7(yay!) and everything is working great except the resolution. (laptop btw) its a 16:9 screen, but the resolution slider thing wont go above 1024x768. everything looks squished and just all around not good. all of my drivers are up to date and ive looked around the internet and tried a few different things, but nothings worked. i never had this problem in vista. maybe its that i got 64 bit 7? my old vista was 32 bit. i really dont know.
View 9 Replies
View Related
Nov 8, 2011
can the resolution on a viewsonic vpad10 be changed from 1024x600 to 1024x768
View 1 Replies
View Related
Jun 21, 2012
my maximum screen resolution is 1024x768 i need 1280x1024
View 3 Replies
View Related
Sep 24, 2012
Will a 55Ti MAX out Guild Wars 2 at a 1024x768 Resolution with super sampling down and anti-aliasing on medium?
View 4 Replies
View Related
Oct 27, 2012
sung laptop (rv510) and when i load it up it won't load past the windows 7 screen dose anyone else have the same problem as me if you do and have fingered out how to fix this
View 5 Replies
View Related
Jan 20, 2012
From the 2 options given I chose "Start Windows Normally"....After pressing Enter it will not go beyond the black screen where it says "Starting Windows" and inmediately reboots to the "Windows Error Recovery" again.I then chose the other option which is "Launch Startup Repair", entered the Disk, wait for it to load system files but it reboots to the Disk loading the files again like an eternal loop.Tried the F8 Advance booting options, chose "boot in safe mode with command prompt", it starts loading but then it reboots itself again!!I don t know what is going on, this is very strange, yesterday I worked all day in the computer..My system specs are these:>XFX Nforce 750i SLI>Intel Core 2 Quad Q9400 @ 2666 MHz>3x2gb Corsair CM2X2048-6400C5 DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-22-6-3)>ATI Radeon HD 4300/4500 Series>WD Caviar Blue 500gb
View 9 Replies
View Related
Mar 1, 2012
So one day I shut down my laptop (Sony Vaio, E series, VPCEB15FG, Windows 7 home premium 64-bit). The following day when I tried to turn it back on it refused to go beyond the welcome screen.. And it just kept restarting. So I started it in safe mode with networking and that seems to be working fine..
View 9 Replies
View Related
