Maximum Screen Resolution Is 1024x768 I Need 1280x1024
Jun 21, 2012my maximum screen resolution is 1024x768 i need 1280x1024
View 3 Repliesmy maximum screen resolution is 1024x768 i need 1280x1024
View 3 RepliesI can't get my resolution above 1280x1024, I'm on a 27" monitor wanting to set it at 1900x1200 but the disc I used previously no longer works.
View 2 Replies View Relatedhow to make screen resolution to 1280x1024 in windows 7 34 bit
View 3 Replies View RelatedI have Windows 7 RC Build 7100 x64, and my 15 inch Compaq CRT Monitor can not go past 1024x768 in windows 7, but in windows XP and Windows Vista, im able to go all the way up to 2048x900 57 hz, ive tried upgrading drivers, using a DVI-to-VGA adapter to use the DVI port with my vga monitor, and clearing the checkbox that hides the higher resolutions, but, i still cannot go any higher than 1024x768,
which is too low of a screen resolution for me, so, please help, ive also tried using vista drivers from 2008, but still a no-go, so im out of ideas, if theres a way to fix this, or this is unfixable for the time being, ill stick with XP, so please let me know.
So today when I booted up this computer the screen resolution had suddenly changed to 1024x768. When I went to change it back (my monitor is about 20 inches in size, so that resolution looks really bad) I found that I couldn't get a resolution higher than that, and the only other resolution available was 800x600. I've been trying to fix it-I restarted, tried to do a clean boot (which didn't do anything when I first restarted so I stopped trying), updated the nvida driver to the latest version, but nothing works. I thought it might have something to do with a game, because I got Fall of Cybertron just yesterday, which didn't cause any resolution problems when I played it yesterday but it could have been the culprit, but they're all limited to the same resolution settings too.
I'm running the 32bit version of Windows 7 and this is what my screen resolution menu looks like.
I have a sony Vaio VGN-SZ4XWN/C and recently installed Windows 7. Installation was fine, however the screen resolution does not go past 1024 x 768. The monitor is wide screen 1280x800 so would have hoped for this option.
I have tried these drivers
NVIDIA DRIVERS 179.48 BETA
and it does not recognise the hardware
and this option from another post, which does not work
Vista drivers and utilities Sony Vaio SZ available | Trevin Chow
The Graphics card is NVDIA GeForce Go 7400 GPU.
any thoughts?
i just upgraded to windows 7(yay!) and everything is working great except the resolution. (laptop btw) its a 16:9 screen, but the resolution slider thing wont go above 1024x768. everything looks squished and just all around not good. all of my drivers are up to date and ive looked around the internet and tried a few different things, but nothings worked. i never had this problem in vista. maybe its that i got 64 bit 7? my old vista was 32 bit. i really dont know.
View 9 Replies View RelatedFew days ago I caught a virus (at least I believe I did)... Used Malwarebytes and found 7 infected files in my Windows Folder. The first few syptoms of my OS was the resolution of the screen changed to 1024x768 (it should be 1920x1080) and is stuck there. The refresh rate changed from 60Hz to 59Hz, when I tried to change it back, the screen just flashes black but the tab still says 59Hz. So I reinstalled Windows 7 with the upgrade option from the OS disk, hoping to fix everything. But it didn't...
My bios was also messed up, everything was reset and edges of my screen was cutten off. The booting animation of Windows 7 is now changed to the Vista's booting animation. I reflashed the bios and that fixed that, now I've done a clean install of Windows 7, formating C: then installing. But all problems still persists... even there is no more virus found by 5 anti-virus programs. I'm still stuck in 1024x768, Windows 7 thinks my hdmi cable is apparently a dvi cable, the refresh rate is still 59Hz, the booting animation is the Vista's one.
I'm on Windows 7 Professional 64 bits My motherboard has an onboard graphics card that works just fine. I installed an old PCI graphics card in order to use more monitors (TNT2 Riva by NVidia). The card is so old that it doesn't have a driver for Windows 7 64bits (it seems that it works in 32 bits)As a result Windows 7 uses a "Standard VGA Graphics Adapter" as the driver, the monitor and card works but it wont let me go above 1024x780, is there any way to force a higher resolution in this driver? Both my monitor and card can support it?
View 9 Replies View RelatedSo I recently just hooked up a 2nd monitor to my computer just to play with it. Unfortunately, it will not go above 1024x768. I would like to set it to 1280x1024. The monitor is a Digimate DGL20, it's an LCD that was made back in 2005. The screen's max resolution might be set to 1024x768, but if that's so its there anyway i can set it to 1280x1024?
View 6 Replies View RelatedToday I purchased a new laptop for school. Upon starting it up i was prompted to update my drivers then to restart my computer. So I did. Now my resolution has changed from the highest being 1366x768 (I believe it was 768) to 1024x768. It wont let me go any higher and everything looks sort of stretched out. It's an ASUS model: X53U
View 1 Replies View RelatedI've had this driver running on all 6 of the Dell laptops I've had over the years, and never seen this.
I just had the screen die on this laptop, so I've plugged in a monitor. But the only two resolution options are 800x600 and 1024x768. I've reinstalled the Intel driver a few times, and while it's installing, the screen flashes to the proper native 1280x1024 resolution for a brief moment, but then never offers it as an option when done.
I had partial success when I uninstalled the driver, allowing the default windows driver (vgapnp.sys) to take over. It gave me access to a wide range of resolution settings, but prevented standby/hibernation, and had no OpenGL support. Then it would be overwritten automatically by Windows with some other copy of the GMA driver every time I would restart. So it wasn't really working out.
I've now reinstalled again, and I'm hoping someone knows of a way to force the correct resolution. There must be a way. How could one of the most ubiquitous graphics chipset/drivers in existence be this broken?
By the way, this is a Dell D520 with a T7200, 4GB RAM, and 945GM chipset.
can the resolution on a viewsonic vpad10 be changed from 1024x600 to 1024x768
View 1 Replies View RelatedWill a 55Ti MAX out Guild Wars 2 at a 1024x768 Resolution with super sampling down and anti-aliasing on medium?
View 4 Replies View RelatedHow can I change the maximum resolution in the control panel"change resolution" dropdown from 1280x1040 TO 1920x1080 it only goes up to 1280x1024
View 4 Replies View Relatedi'm having some trouble with my screen resolution . i set it at (800x600) cause i'm using a 51 inch big screen hd tv. it go's full screen but then for no reason it puts the bars back on the sides of the screen. i checked and it still reads (800x600) and i can't get it to change back to full screen until i reboot. works fine in vista . i'm not seeing anything about drivers failing so i'm not sure what's happening.
View 5 Replies View Relatedfor the past month i have had an issue where before the log in screen would show, it would be a blank screen with a cursor, that i could move. (It worked normal in safe mode) I normally would just ignore this problem and it seemed to go back to normal after a little while. Well yesterday it didn't go away, so i went online looking for a solution, in safe mode. I've read to disable/enable drivers, re-install drivers, just plenty of things. And the result of all this is that my screen resolution wont go back to normal, and there is a black border around my screen, around a half inch. Also, my computer has been running EXTREME slow lately.
View 1 Replies View Relatedmy screen resultion only gives me a wide screen, but i want the monitor to have a full screen. to fit top and buttom how can i do that ?
View 4 Replies View RelatedIs there any way to force the Standard VGA Driver to display in 1280x1024 32bit? If I look at the modes available, then I find 1280x1024, but only in 16bit.
I have an old Nvidia GeForce2 MX/400, and after installing the XP drivers I was able to run at 1280x1024 in 32bit, but I was getting some crashes in nv4_mini.sys when trying to install DVDFab. "The Internet" tells me that this is due to the XP drivers, so I uninstalled them again and rolled back to the Standard VGA Driver and was able to install the software. But now I am limited to 16bit again.
So, is there any way to force this?
Is there a way to have 1280x1024@75hz with gpu scaling on i really don't like seeing black bars. 60hz is just to choppy when playing cod4 i had it setup before but then i updated my drivers and now cod4 is locked at 60hz again.
View 11 Replies View RelatedI have a Dell Monitor model # 1908fwpt and we have used it as an external for a few laptops now, and on the last two hook-ups it has constant, non-flickering white horizontal lines across the screen. The only resolution that doesn't is 1280x1024 for some reason. I have changed the cables, used both VGA and DVI, and run the self-diagnostics and updated all drivers. I have chased this issue up and down and not been able to come up with a way to fix it. The monitor is not old, it hasn't been used very much, and I really don't want to replace it...
Since its done it on a few different computers I tend to think its not a driver issue, or a cable issue... And the one resolution it works on is all stretched out and flat.
I have recently been running my computer for really long periods and have only just turned it off last night.When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to safe mode resolution.
So iI have tried changing the resolution (Normal is 1920x1080), with no luck. Even though it says it is on 1920x1080 (recommmended), I know for a fact that it's not actually that resolution.You can tell by this photo that the desktop is way to large for 1920x1080. Unfortunetly I do not have a photo of my original desktop resolution .I have installed the latest NVIDIA graphics driver, and it is the right driver for my card. Also checked all windows updates.
Specs:
Graphics Card - GTX 460
Monitor - BenQ G2420HD
I have just purchased a 9600GT which is capable of a resolution of 2560x1600 but my monitor is only stated to be 1680-1050, My question is this, would it do my monitor any damage to force upon it the said 2560-1600?
Edit: It is an acer 22" and not one in specs.
i have used to connect to my pc (vista x64 Radeon 4670) through vnc that is connected to a fullhd tv via hdmi. When i shut down the tv nothing happened to the screen resolution when connected through vnc but now with Windows 7 x64.
when i turn off the tv the resolution changes to some lower and i cant use the whole 1920x1080 and after turning the tv on again it resizes to the full resolution but with icons on desktop without any order! Is there any way to Windows 7 not automatic change resolution when turning off the tv like in vista?
I was wondering if I could enter my own numbers or get a smalller resolution.
The highest as far goes up to 1040 * 743 [NUMBERS MIGHT BE WRONG]
Can i make it go up to like 1240 * 840?
, i am running windows 7 on a flattron lg screen my resolution does not look right. my computer has me at 800x 600 is that the right setting i thought it was1024x600
View 1 Replies View RelatedI have tried everything to keep the screen resolution at it's max but to no avail. When I change pages the screen reduces to a small size. After repeated attempts to keep the screen size to it's fullest the size changes back to small. Yes, I had done everything that the help section said to do and hit the apply button and keep changes. It only stays for a one page then reverts back to the small screen.
View 1 Replies View Relatedi recently upgraded my OS from winxp sp3 to win7 pro. Before the upgrade my native screen resolution is 1360x768 and after the upgrade, it has changed to 1900x1080, i dont like the change although it gives me bigger space on my desktop, but it seems everything on my screen are smaller than before. I always design in photoshop and when i make banners, its really small i dont see the details. I tried to change the resolution back to 1360x768 but when i do, its not that sharp, kinda blurry.
View 2 Replies View RelatedI was wondering if it's actually possible to change my screen resolution to anything I want. I have tried the right click then Screen resolution but it doesn't display the screen resolution I need.Specifically I need my screen resolution to be 1600x900.Computer specs if it helps: Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 7989 Mb Graphics Card: Intel(R) HD Graphics, -325 Mb Hard Drives: C: Total - 456088 MB, Free - 99351 MB; D: Total - 20546 MB, Free - 2986 MB; F: Total - 99 MB, Free - 81 MB; Motherboard: Hewlett-Packard, 144A Antivirus: Norton 360, Updated and Enabled
View 6 Replies View RelatedMy OS is Windows 7 32-bit. I'm using 2 monitors. The first one is from my laptop, Thinkpad T400 which has a resolution of 1440 x 900 pixels. The second one is a 18.5-inch LCD (G900HD from BENQ), which has a resolution of 1366 x 768 pixels.
I need to use both of them at the same time (to view more windows simultaneously). We all know that this is possible if we choose the right option in "Control PanelAppearance and PersonalizationDisplayScreen Resolution".
My problem is that I cannot choose the right setting for my second resolution, because its native resolution (1366 x 768) does not appear in the suggested list, as you can see from the below picture:
As a result, text and images displayed in my second monitor seem to be blurry. So my question is how to set my second monitor's resolution back to its original state?
I have installed Team Fortress 2 and Combat Arms EU on to my Asus F7Se laptop with the Radeon HD 3400 series graphics card and when ever I run either game the screen resolution goes all screwy! It is like when you are watching a 4:3 TV program on a 16:9 TV.
All of my settings are correct within Windows and the game. I have noticed that when I start a game there is a message that windows is changing the theme back to basic (or something like that).