i recently upgraded my OS from winxp sp3 to win7 pro. Before the upgrade my native screen resolution is 1360x768 and after the upgrade, it has changed to 1900x1080, i dont like the change although it gives me bigger space on my desktop, but it seems everything on my screen are smaller than before. I always design in photoshop and when i make banners, its really small i dont see the details. I tried to change the resolution back to 1360x768 but when i do, its not that sharp, kinda blurry.
I had a weird problem with windows 7 logon screen - it displays in a resolution lower than my laptop's native 1920x1200 resolution, even though I have used both logonstudio vista and tweakslogon.exe to change the background file. The file is in 1920x1200, but windows 7 still displays it in a lower resolution. Any fixes? I have done the registry edit as well, still no luck. I have tried naming the file both "backgroundDefault.jpg" and "background1920×1200.jpg" but still no luck..
I have a hp w19 monitor and its native resolution is 1440*900
it worked fine on windows xp and vista on my old rig but in windows 7 the nearest resolution which i got was 1600*1200 which was too big for my monitor to display.
Now my question is that i am building a new rig with intel i7 860 4 gb corsiar ram and a ati radeon hd 5850 i will be plugging my video card into my moniter via a vga cable so will this problem be common and i will also use th 64 bit version of win 7 and earlier i was using the 32 bit.
I am trying to play a game I used to play nearly ten years ago. It's a free online game called Continuum/Subspace and there are user created "zones" or variations of the game within the game (if that makes sense). I play in a zone called Trench Wars. It's a top down game, meaning you are looking down at your ship as if from above and the screen scrolls as you move to reveal more of the area (map) you are playing in. You are in a spaceship of your choice with varying weapons for each ship. The game requires aiming at your enemies before firing at them and anticipating their moves.
Well I noticed that playing at a higher resolution allows you to see more of your immediate area and expands your view of the map. It works just like your desktop in essence. The higher the resolution, the smaller the icons, but the more space you have. In the game, the higher the resolution, the smaller the ships are, but you can see more space around you. Obviously, this would give an advantage to anyone playing on a higher resolution, as they would be able to see their enemies and fire before the enemy even knew they were there.
My native resolution for a 32" LCD TV is 1360x768. This is fine except when playing continuum. So I tried changing my resolution to the max which is 1920x1080. Well the screen expanded and cut off parts of my screen, everything got blurry, and had a blue tint to it. I figured this is probably not good for my TVs functionality, as I have burnt out old monitors in the past by running too high of a resolution. So I went to my NVIDIA Display Properties and started messing around. I realized that changing to a higher resolution (1920x1080) from here still caused me to lose part of the screen, but the blue tint wasn't there.
It's still vaguely blurry, but not enough to really notice. So I went to the resizing tab and resized. My screen to fit at the higher resolution. I ended up with resolution of 1842x1036 at 60HTz refresh. I resized my icons and text and the screen is perfect now. But, it is much higher than the native resolution of my monitor. So my question is, will keeping it at this resolution cause my TV to "burn out" or have any otherwise adverse effects?
System Specs that might be important: Display: Geforce GTX 550ti connected through HDMI to 32" LCD TV TV: Panel Resolution - 1366x768 Display Resolution Scan Rates - HDMI 1.3 Suggested Resolutions 1080p, 1080i, 720p, 480p, 480i
westinghouse lcm 22w3 monitor my native resolution worked fine on my old comp. got a new comp, with windows 7 64bit. and wont display my native resolution. pretty much all resolutions except mine...and some very close to the correct one. only goes up to 1600x1200 (what im using right now)
how do i get the right resolution? i have an ati radeon hd 4250 integrated graphics card.
its bugging me SOOO bad how im so close to the right resolution, but everything is off ever so slightly. the person i bought the computer from was telling me how i might get the correct resolution if i switch from my current vga cable, to a dvi cable. he said id get my native resolution, and it'd look better.
if there are any drivers i do need to update.. i dont know what ones they are, or where to get them. im used to having xp..this is my first night of having windows 7, and im unfamiliar with every single this on this computer.. so bare with me.
edit: id like to add that after i right click and go to screen resolution, and click update driver, it says its up to date. also, the "display" is being read as "generic non pnp monitor" which is odd, because my monitor IS a pnp.
I've had this card now for ~2 months, and it has worked flawlessly, up until now. Out of nowhere my monitors native res. of 1920x1080 is not an option in the control panel (it says display device generic pnp...or something like that) In Nvidia control panel 1920x1080 is an option however when i choose it and click apply it reverts back to the incorrect resolution (1024x 768 i think it was)the option for display device is something like GTX 580 generic-non PnP...
I don't know whether this is a Windows 7 problem or a Catalyst problem, but here goes...
I have installed Windows 7 (clean) and the latest Catalyst drivers for my ATI HD4850 card. My monitor is a Samsung SyncMaster 2243NW, a 22" panel with a native res of 1680 x 1050. I have installed the monitor driver from Samsung's website and the monitor is now showing correctly in device manager.
When I right click on the desktop and choose "screen resolution", the "change the appearance of your display" screen offers only "display device on DVI" ion the drop down menu, not the Samsung monitor, and does not offer me the native resolution. The nearest is 1440 x 900. If I click "advanced" I'm taken to the catalyst driver screen which correctly identifies the monitor, but bizarrely still offers only the same choices of resolution as the Windows 7 screen. 1680 x 1050 just isn't there.
Can anyone help me get my monitor to run at native res in Windows 7?
I'm having trouble getting my monitor to display at its maximum resolution and I cannot for the life of me figure out what's wrong.
I have an ASUS VH242H 23.6" Monitor which has a native resolution of 1920 x 1080. I originally had windows xp and it could display this resolution just fine. Now, after installing windows 7, when I hook the monitor up to my laptop, I can only get it to display up 1400x1200. Going past this point causes the monitor to flas an out of range message. Furthermore, my computer won't let me designate the refresh rate as far as I can tell. I updated the driver for my graphics card and that didn't seem to make a difference.
I have an HP nw8440 Mobile Workstation with a ATI FireGL v5200 GPU.
I got my friends laptop to reinstall Windows, but after doing so I've lost the option to set the resolution to its native 1600x900. I've downloaded all the drivers necessary from the Toshiba website, but still no avail. After installing CCC and running it, it says "There are currently no settings that can be configured using AMD Control Center." I googled a bit and it seems I'm stuck in default VGA mode. When I go to check display adapter properties, it does indeed say VGA adapter. The laptop model is Toshiba Satellite L775D-S7220.
i just purchased this monitor, and to keep this simple, windows 7 doesnt recognise my monitor as a samsung. it just says generic pnp, but wont let me go above a resolution of 1280 x 720. the native resolution on this monitor is 2048 x 1152. i have a BFG GTX 280 video card so thats no issue there. all my drivers are up to date, and i also tried forcing a driver thats pre loaded with windows, but nothing works. anyone have any ideas?
EDIT: also tried forcing a custom rez through NVIDIA CP- no go.
My monitor: Samsung Syncmaster 933SN won't display at it's native resolution which is 1360 x 768. It will only display at 1024 x 768 which only takes up 2/3rd's of the screen real estate!
I have the most updated driver for the monitor, 3.0.0.0 from Samsung, which says it works on XP, and VISTA 32/64, but for some reason Windows 7 isn't recognizing the native resolution. It was recognized easily on Windows Xp when I bought it a few months ago, so what can I do?
i'm having some trouble with my screen resolution . i set it at (800x600) cause i'm using a 51 inch big screen hd tv. it go's full screen but then for no reason it puts the bars back on the sides of the screen. i checked and it still reads (800x600) and i can't get it to change back to full screen until i reboot. works fine in vista . i'm not seeing anything about drivers failing so i'm not sure what's happening.
for the past month i have had an issue where before the log in screen would show, it would be a blank screen with a cursor, that i could move. (It worked normal in safe mode) I normally would just ignore this problem and it seemed to go back to normal after a little while. Well yesterday it didn't go away, so i went online looking for a solution, in safe mode. I've read to disable/enable drivers, re-install drivers, just plenty of things. And the result of all this is that my screen resolution wont go back to normal, and there is a black border around my screen, around a half inch. Also, my computer has been running EXTREME slow lately.
I have recently been running my computer for really long periods and have only just turned it off last night.When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to safe mode resolution.
So iI have tried changing the resolution (Normal is 1920x1080), with no luck. Even though it says it is on 1920x1080 (recommmended), I know for a fact that it's not actually that resolution.You can tell by this photo that the desktop is way to large for 1920x1080. Unfortunetly I do not have a photo of my original desktop resolution .I have installed the latest NVIDIA graphics driver, and it is the right driver for my card. Also checked all windows updates.
I have just purchased a 9600GT which is capable of a resolution of 2560x1600 but my monitor is only stated to be 1680-1050, My question is this, would it do my monitor any damage to force upon it the said 2560-1600?
i have used to connect to my pc (vista x64 Radeon 4670) through vnc that is connected to a fullhd tv via hdmi. When i shut down the tv nothing happened to the screen resolution when connected through vnc but now with Windows 7 x64.
when i turn off the tv the resolution changes to some lower and i cant use the whole 1920x1080 and after turning the tv on again it resizes to the full resolution but with icons on desktop without any order! Is there any way to Windows 7 not automatic change resolution when turning off the tv like in vista?
, i am running windows 7 on a flattron lg screen my resolution does not look right. my computer has me at 800x 600 is that the right setting i thought it was1024x600
I have tried everything to keep the screen resolution at it's max but to no avail. When I change pages the screen reduces to a small size. After repeated attempts to keep the screen size to it's fullest the size changes back to small. Yes, I had done everything that the help section said to do and hit the apply button and keep changes. It only stays for a one page then reverts back to the small screen.
I was wondering if it's actually possible to change my screen resolution to anything I want. I have tried the right click then Screen resolution but it doesn't display the screen resolution I need.Specifically I need my screen resolution to be 1600x900.Computer specs if it helps: Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 7989 Mb Graphics Card: Intel(R) HD Graphics, -325 Mb Hard Drives: C: Total - 456088 MB, Free - 99351 MB; D: Total - 20546 MB, Free - 2986 MB; F: Total - 99 MB, Free - 81 MB; Motherboard: Hewlett-Packard, 144A Antivirus: Norton 360, Updated and Enabled
My OS is Windows 7 32-bit. I'm using 2 monitors. The first one is from my laptop, Thinkpad T400 which has a resolution of 1440 x 900 pixels. The second one is a 18.5-inch LCD (G900HD from BENQ), which has a resolution of 1366 x 768 pixels.
I need to use both of them at the same time (to view more windows simultaneously). We all know that this is possible if we choose the right option in "Control PanelAppearance and PersonalizationDisplayScreen Resolution".
My problem is that I cannot choose the right setting for my second resolution, because its native resolution (1366 x 768) does not appear in the suggested list, as you can see from the below picture:
As a result, text and images displayed in my second monitor seem to be blurry. So my question is how to set my second monitor's resolution back to its original state?
I have installed Team Fortress 2 and Combat Arms EU on to my Asus F7Se laptop with the Radeon HD 3400 series graphics card and when ever I run either game the screen resolution goes all screwy! It is like when you are watching a 4:3 TV program on a 16:9 TV.
All of my settings are correct within Windows and the game. I have noticed that when I start a game there is a message that windows is changing the theme back to basic (or something like that).
So I just downloaded Windows 7 and the screen is not showing up full size on my laptop. I went to the control panel and went to the screen resoltution thing and it is set on the largest setting; 1034 x 768, and only has two options which are 1024 x 768 and 800 x 600 on the slider. Any one know how to make it full screen?
Also on the sound thing on the taskar it has a red x and says no audio output device. Anyone know where I can download one?
Sometimes when UAC pops up my screen resolution changes from the native 1680x1050 resolution to 1024x768. There doesn't seem to be any reason for the change. Is anybody else having this problem or is it just me?
I still use an old CRT 19" monitor (Philips 109p4). It displays best, sharpest picture at 1152x864.
But Windows 7 "thinks" and persists that my Philips should be fed with 1600x1200 image (it calls it "Recommended resolution") . But it's too much for my monitor - and the picture quality suffers (everything gets a bit blurry).
What's the problem, one could ask, simply go to the display settings and set the screen resolution to 1152x864. And here's where the tricky part begins! Windows 7 only pretends to let me set lower resolution!
The desktop size changes to 1152x864, but the nVidia graphic card still generates 1600x1200 image (which is confirmed by OSD function in my monitor). Thus the smaller desktop gets smoothly (with some kind of antialiasing or rather bilienear texture filtering) magnified (projected) to fit the big phisycal 1600x1200. Result - lack of sharpness.
I can understand that this trick may be usefull for some kind of users with some type of LCD displays. But in my case - CRT - this sucks big time!
How to make Windows 7 *RELLY* set the resolution to a lower one?
I've widnows 7 build 7100 ... an i've a problem in resolution, i've screen LG 24 inch, and the desktop look very small when i put 1920*1200 (recomanded), when i put other resolution the length and the high look very small, how i solve this problem?? ...
show the images , first when i put 1920 * 1200, secondly when i put 1024*768, and show the skype fonts how they were when i keep the resolution 1920 * 1200.
So today, (9/9/2011) I noticed my Catalyst Control Center had an update from my version 6 to version 8. So I clicked install and all of a sudden my screen resolution get messed up. Now when I switch to my default resolution 1920x1080, my taskbar gets covered 80%. Now I'm using 1680x1050; my taskbar isn't covered now but when I start up the browser, I can't see the scroll bar on the right and the top part is covered a little now.
I am confused by the screen resolution of my Windows 7 Media Centre PC. I'm running Win 7 Pro with a 16:9 widescreen monitor which claims to have a native resolution of 1366 x 768. I've never been able to set that in Windows or the video driver.7MC has the monitor set to 1024 x 768 (4:3) but nevertheless shows a fullscreen image with a 16:9 aspect ratio and works perfectly. When I first installed Win 7 the desktop was also set to 1024 x 768 but the image was stretched horizontally so that it filled the widescreen but was horribly distorted.I discovered that setting the Windows desktop to 1148 x 648 (16:9) almost fills the whole display, just leaving thin black lines on either side and filling it vertically. As this is the correct aspect ratio I was happy to live with the slight reduction in size. 7MC is unaffected and continues using the whole screen at, presumably, some secret alternative to 1024 x 768.Since the 648 vertical resolution is being stretched to 768 to occupy the full height of the monitor I presume the 1148 horizontal resolution is being stretched by the same factor. This would make the horizontal resolution 1361, very close to the 1366 x 768 the monitor wants.
I took screenshots of both the MCE screen and the Windows desktop, expecting that the image dimensions would be related to one of the preceding resolutions. However, they are both 1952 x 648, with the actual screen image in the left hand 1148 x 648 area and an empty desktop section to the right. This makes no sense to me whatsoever. Somewhere and somehow there's a lot of rescaling or cropping of the monitor image and I'd love to know what's going on. I need to know this because I'm trying to set TunerfreeMCE up and want to tell it the screen coordinates of various buttons on a flash catchup service for a particular channel so it can trigger play etc. I just don't know which coordinate set to use!The display adapter is a Radeon 9600...did I mention this was old? I had exactly the same problems with Vista previously, have just upgraded and would like finally to get it right.
i moved into a new house last week and when i turned on my pc i noticed how there was a 3/4 inch black gap between where the screen displayed colour and the end of the screen. I have installed the newest graphics drivers on my sapphire radeon 4850HD but it doesn't seem to change.. There are no new important windows updates, which i thought it would've fixed it in the first place. anyone have any idea?
