Will a 55Ti MAX out Guild Wars 2 at a 1024x768 Resolution with super sampling down and anti-aliasing on medium?
View 4 RepliesSo i was playing GW2 and usually my pc will freeze and i will have to do a hard restart. (Usually after at least 40 mins) been somewhat alleviating this problem by making the room REALLY REALLY cold. However today i finally got a blue screen instead and im going to post all the info here in the hopes of aid! firstly, here's a picture of info from BlueScreenView imgur: the simple image sharer.
View 6 Replies View Relatedit's blue screened so many times it's causing a bit of frustration, because it's a perfectly good computer i don't want to replace it
my crash files are 25.2 MB because there is alot, if suspicious do scan and things, i am pretty sure it is not video card or logitech drivers, only happens in games , never internet browsing , i've left my cpu on before for 2 days, and no bluescreen
I recently started playing the game Guild Wars again on my Dell XPS 15 Laptop. I played for a little while and then all of a sudden I got the BSOD. I tried to play again and after about an hour the same thing happened. Now anytime I open Guild Wars I get the BSOD.The main line up at the top of the BSOD was DRIVER_IRQL_NOT_LESS_OR_EQUAL.As for my computer/computer history I am on a Dell XPS 15 with an i7-2620M @ 2.7 GHz cpu. I run dual monitors, my laptop monitor and my television that is connected to my laptop by an HDMI cable. My graphics cards are NVIDIA GeForce 540M and the intel graphics card that came with the computer. I can play any game ranging from League of Legends, Call of Duty. Black-Ops, Minecraft, World of Warcraft, Starcraft II,Counterstrike:Source,Team Fortress 2 and so on and not have any problems. It only occurs with Guild Wars. I think it may have to be because Guild Wars is an older game and it may have problems with Windows 7 64-Bit, but I wanted to see if there was something else wrong.All of my drivers are up to date and Guild Wars is ran through the Steam platform and I verified the games cache through Steam.
View 1 Replies View Relatedwhat anti virus is compatable with super anti spyware professional
View 2 Replies View RelatedSo I recently just hooked up a 2nd monitor to my computer just to play with it. Unfortunately, it will not go above 1024x768. I would like to set it to 1280x1024. The monitor is a Digimate DGL20, it's an LCD that was made back in 2005. The screen's max resolution might be set to 1024x768, but if that's so its there anyway i can set it to 1280x1024?
View 6 Replies View RelatedToday I purchased a new laptop for school. Upon starting it up i was prompted to update my drivers then to restart my computer. So I did. Now my resolution has changed from the highest being 1366x768 (I believe it was 768) to 1024x768. It wont let me go any higher and everything looks sort of stretched out. It's an ASUS model: X53U
View 1 Replies View RelatedI've had this driver running on all 6 of the Dell laptops I've had over the years, and never seen this.
I just had the screen die on this laptop, so I've plugged in a monitor. But the only two resolution options are 800x600 and 1024x768. I've reinstalled the Intel driver a few times, and while it's installing, the screen flashes to the proper native 1280x1024 resolution for a brief moment, but then never offers it as an option when done.
I had partial success when I uninstalled the driver, allowing the default windows driver (vgapnp.sys) to take over. It gave me access to a wide range of resolution settings, but prevented standby/hibernation, and had no OpenGL support. Then it would be overwritten automatically by Windows with some other copy of the GMA driver every time I would restart. So it wasn't really working out.
I've now reinstalled again, and I'm hoping someone knows of a way to force the correct resolution. There must be a way. How could one of the most ubiquitous graphics chipset/drivers in existence be this broken?
By the way, this is a Dell D520 with a T7200, 4GB RAM, and 945GM chipset.
I have Windows 7 RC Build 7100 x64, and my 15 inch Compaq CRT Monitor can not go past 1024x768 in windows 7, but in windows XP and Windows Vista, im able to go all the way up to 2048x900 57 hz, ive tried upgrading drivers, using a DVI-to-VGA adapter to use the DVI port with my vga monitor, and clearing the checkbox that hides the higher resolutions, but, i still cannot go any higher than 1024x768,
which is too low of a screen resolution for me, so, please help, ive also tried using vista drivers from 2008, but still a no-go, so im out of ideas, if theres a way to fix this, or this is unfixable for the time being, ill stick with XP, so please let me know.
So today when I booted up this computer the screen resolution had suddenly changed to 1024x768. When I went to change it back (my monitor is about 20 inches in size, so that resolution looks really bad) I found that I couldn't get a resolution higher than that, and the only other resolution available was 800x600. I've been trying to fix it-I restarted, tried to do a clean boot (which didn't do anything when I first restarted so I stopped trying), updated the nvida driver to the latest version, but nothing works. I thought it might have something to do with a game, because I got Fall of Cybertron just yesterday, which didn't cause any resolution problems when I played it yesterday but it could have been the culprit, but they're all limited to the same resolution settings too.
I'm running the 32bit version of Windows 7 and this is what my screen resolution menu looks like.
I have a sony Vaio VGN-SZ4XWN/C and recently installed Windows 7. Installation was fine, however the screen resolution does not go past 1024 x 768. The monitor is wide screen 1280x800 so would have hoped for this option.
I have tried these drivers
NVIDIA DRIVERS 179.48 BETA
and it does not recognise the hardware
and this option from another post, which does not work
Vista drivers and utilities Sony Vaio SZ available | Trevin Chow
The Graphics card is NVDIA GeForce Go 7400 GPU.
any thoughts?
i just upgraded to windows 7(yay!) and everything is working great except the resolution. (laptop btw) its a 16:9 screen, but the resolution slider thing wont go above 1024x768. everything looks squished and just all around not good. all of my drivers are up to date and ive looked around the internet and tried a few different things, but nothings worked. i never had this problem in vista. maybe its that i got 64 bit 7? my old vista was 32 bit. i really dont know.
View 9 Replies View Relatedcan the resolution on a viewsonic vpad10 be changed from 1024x600 to 1024x768
View 1 Replies View Relatedmy maximum screen resolution is 1024x768 i need 1280x1024
View 3 Replies View RelatedFew days ago I caught a virus (at least I believe I did)... Used Malwarebytes and found 7 infected files in my Windows Folder. The first few syptoms of my OS was the resolution of the screen changed to 1024x768 (it should be 1920x1080) and is stuck there. The refresh rate changed from 60Hz to 59Hz, when I tried to change it back, the screen just flashes black but the tab still says 59Hz. So I reinstalled Windows 7 with the upgrade option from the OS disk, hoping to fix everything. But it didn't...
My bios was also messed up, everything was reset and edges of my screen was cutten off. The booting animation of Windows 7 is now changed to the Vista's booting animation. I reflashed the bios and that fixed that, now I've done a clean install of Windows 7, formating C: then installing. But all problems still persists... even there is no more virus found by 5 anti-virus programs. I'm still stuck in 1024x768, Windows 7 thinks my hdmi cable is apparently a dvi cable, the refresh rate is still 59Hz, the booting animation is the Vista's one.
In Windows Seven, is there an easy way to make all icons appear as Medium icons?
I don't want to right click and change the settings in every folder... but would like to apply this globally on all folders on my desktop.
I have been trying for 3 days now to download patches from star wars the old republic and my computer keeps on crashing before the download is complete i have also had this crash while playing battle field 3 but it only happens after a while of playing.Also my computer crashes when i am not there i will come home to the log in screen
View 1 Replies View RelatedJust did a clean install. I like all my folders size set to Medium. opened C:, made the folders medium icons, folder & search options, view, folder views, "apply to all".There are still some folders (music, movies, etc.) that I have to change the size.
View 3 Replies View RelatedThis is a game that I used to play when I was a kid. I love it! I have lost my CD so I decided buy this game from steam. After I installed the game, when I try to run it, I can see the republic commando start-up but then the game crashes. No error messages or anything. I can not even get to the menu. I have Windows 7 64-bit and my video card is ATI Mobility Radeon HD 4670.
View 2 Replies View RelatedI recently installed SW: BF2 and when I start Instant Action, it crashes to desktop with no message.
View 9 Replies View RelatedI am currently looking for a solution for customizing windows images and then automating the deployment/Out-of-box Experience (OOBE) for the business I work for. I have done some research for what is available, but so far I find the Microsoft solutions to be complicated or not quite what I need. I have done a bit of exploration with Microsoft Windows Automated Installation Kit (WAIK) and Microsoft Deployment Toolkit (MDT), but found that WAIK is a bit too complicated, and I don't believe MDT will suit our needs.Here is a bit of background information to familiarize you with our environment/needs:Customization:
-Currently we are taking the factory Dell image that comes with the laptops and customizing it to our needs by uninstalling bloatware and installing our default applications. We are also customizing the image by configuring power settings, screen saver settings, IE homepage, etc. To do this, we are currently forced to use local group policy, which disables the option to let the user change said settings. Currently, we do not have our domain environment setup with the proper OUs to use domain group policy. Therefore, we are using local group policy as a temporary solution. Once all of these settings are set, we create a backup image of the system before using sysprep, then we sysprep the box and create another image before booting the system again so that we can install the image onto computers and have them boot into OOBE for setup.
-We want to be able to set the desktop background, profile picture, IE homepage, screen saver, and power settings as defaults - i.e. giving the users permission to change them after receiving their system. Using group policy disables the ability to let the user change the settings after receiving the computer. Of course we don't want to use local group policy at all in a domain environment, but without our domain setup with the proper OUs, it appears we currently don't have an alternative.
Image installation/deployment:
-Currently we use Symantec Ghost to copy our customized image to each box. The OOBE is not customized at all, so each time we image a box, we have to manually select language settings, time settings, connect to the wireless network, etc.
-What we want is to be able to automate the process by predefining most of these settings. That way, when we startup the computer with the new image, we only have to enter the user account and computer name, while the rest of the settings are automated.
From what I understand, XP deployment was done using an unattend or answer file that you used to answer the prompts in OOBE. As I said before, I have done some research on WAIK and MDT, but they don't seem to be user friendly (specifically WAIK) and will take a whole lot of time to learn and then more testing to see what works and what doesn't. My hope is that someone could show me possible third party tools for customizing the image and/or automating the OOBE/deployment process. I am currently encountering issues with setting a custom desktop background for new users, which should be a very simple task, but Microsoft doesn't seem to want to make it simple.
I have a HPVP15 that is 15". My laptop LCD "broke", and I am using this as my primary display. I am absolutely positive that I could get a higher resolution on this monitor as it is clearly close to the same size to my 15.6" LCD display on my laptop that gets 1366x768.
View 5 Replies View RelatedWhen I try to play a game called F-22 Total Air War 2.0 I get an error which says that the resolution 1024.768 is unsupported by the harware.. so I look into my desktop options and it looks like there is an option for 800x600, 1024x600, 1152x648 and higher wide screen resolutions but the 1024x768 is gone? I did play the game yezterday, I disconnected the HDMI, got upstairs, played a few more games, came back downstairs, plugged in the HDMI, launched the game and bam I got the error! I have a ATI Radeon Mobility HD5470 and the newest ATI Catalyst Center downloaded 3 days ago. How can I 'enable' the 1024x768 resolution again? Without it I can't play the game on my Big TV and I will be stuck with my little laptop screen.
View 8 Replies View Relatedcouple days ago, I boot my system up and I'm shocked to find my resolution @ 1024x768 when it's supposed to be 1440x900, as that's the max for my monitor.Well, I tried rebooting, tried uninstalling/reinstalling the drivers, downloaded the most recent drivers from Nvidia and uninstalled/reinstalled again...still same issue.I finally got fed up and decided to reload windows fresh. Formatted my partition and went through the setup process. After all was said and done, reinstalled Nvidia drivers for my card and the same damn issue was still there.So, am I correct in assuming that, for what ever reason, my video card has crapped the bed on m
View 4 Replies View Relatedbanging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
View 3 Replies View RelatedI am using Virtual Box 2.2.4 since it's the version we have at uni and my debian file won't work on the newer versions. But when I try and get Server 2008 from dreamspark to work it won't. It keeps saying "no bootable medium" when I first boot it up. Also, can you get server 2008 to work in virtual PC?
View 2 Replies View RelatedI have bee testing performance with/without superfetch - it didnt seem to matter what I change the setting to in registry it still superfetched data i currently have prefetcch on 2 (boot only) and superfetch on 0 (off) and it still fetches into memory, i then realised the service was still started (although I thought changing the registry switched it on or off regardless) so I turned off the superfetch service and rebooted, guess what? its still on and prefetching into memory?im using windows 7 64-bit is this why?
right now task manager reports
TOTAL: 1918
CACHED: 1096
AVAILABLE: 1076
FREE: 28
Is is possible to make Windows 7 superber tinier, I know how to make it by "use small icons" from taskbar properties, but it is not what I want,, because in that case I am loosing the date from beneath the clock! I want it make a little bit smiler and still keep the Date>
View 4 Replies View RelatedOK, so my computer had a complete meltdown the other day... right after Windows 7 failed to boot, my Linux started having kernel panics and freezing every 5 minutes... so I backed up the Windows partition's files, and wiped the drive (By wiped I mean I deleted the partition, I didn't use a "disk wiping" tool)
Well Linux reinstalled perfectly fine, so I figured it wasn't a hardware failure like I thought it could be... I even used the memtest feature for several hours and it all came back fine.
Well, I reinstalled Windows 7 not once, not twice, but THREE times. The first time, I put all my Windows files back right away (including the Windows folder), but it still had the brand-new look and not my old settings so I wiped it. The second time, literally 5 minutes after I installed it, Windows Update froze up right after installing my Wi-Fi drivers and locked up the entire computer... and after force-rebooting it it became super-sluggish like it was before I reinstalled it (like when I posted on here last time)
This most recent time it worked correctly, but it still doesn't seem to be as fast as when I first installed it. If I plug in my external hard drive with the Windows files, it seems to lock EVEYRTHING up... almost as if my old Windows partition was cursed or something. I deleted the "Windows" folder from it so there was nothing possibly corrupted there, but it still doesn't seem to be perfect.
Well, even with it unplugged, it's frozen up several times now. I only had maybe 3 programs running at once... it's not like I was overloading the computer. I just tried installing Paint.NET and it completely froze my computer twice and now the installer simply won't run. What's even weirder is I did a "chkdsk" from a command prompt, and while it found nothing wrong with my disc, it stopped around 65% and sat there for several minutes. Same as before I wiped out my drive.
I tried sfc /scannow and it terminated at 14%, saying the service couldn't complete...
I might try that again in safe mode, but still, something is still messed up with Windows. Does anybody have any ideas? I mean, would it be likely there's some bad sectors on my drive that Windows can't find? Would defragmenting help? I guess I just don't understand what's going on... I've wiped the drive a few times now and it's still not working perfectly.
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
View 1 Replies View RelatedMy original LG DVD optical drive stopped working ( Windows & Pro 64 bit ) after 3 months.
The replacement LG drive I bought wouldn't install, Windows tried but announced that installation had failed. Very helpful.
I contacted LG only to be told it was not compatible with Windows & so I bought a Samsung Super Writemaster SH-S223.
Lo and behold I get the same message and no drive.
Any anyone had similar problems ?