Windows 7 Ultimate - Unable To Access PC Via Remote Desktop?
Dec 30, 2011
Today is the first time I have had to access my work pc remotely so went out and bought Windows 7 Home. I accessed my works VPN network via the browser (have an icon in my taskbar called "network Connect" which tell me how long I have been connected for), I was able to ping my work PC but when I tried connect via Remote Desktop I was getting an error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote Access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
I am trying to access my work PC remotely after doing a fresh install of windows and receiving the below:"Remote desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."I have established some sort of VPN connection through the browser with work (sorry I am not very technically inclined, icon says "network connect" in the taskbar and shows I am conected), our techie guy said then just run Remote Desktop and type in my computer name and should connect, which it is not.
Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.
I have Dell Latitude E6420 which Window 7,IE9. We use F5 Network & Symantec Antivirus in Office.Yesterday I tried to do remote desktop connection of my Off PC. The URL[xxx/itt] i used errors saying " Your device doesnt not comply the client security policies".tell me which version of IE,antivirus with F5 support Window 7 to do remote connection?
I can remote desktop from PC1 to PC2, however I cannot remote desktop from PC2 to PC1? I turned off Windows Firewall on PC1 and PC2 still couldn't remote desktop PC1. The ports are forwarded on both PCs.
I am trying to have my computer the most secure as possible. I have a firewall, antivirus, anti-malware, etc. But I was wondering is it possible to have on your computer even with an anti-virus, a malicious program that allow Remote Desktop Control access (something like ProRat trojan or teamviewer)? Because I am suspecting that someone I know could had install/changed something on my computer. I know those suspicion might not be founded but in anyway I would like to understand how it work.
1. Is there any malicious application that allow Remote Desktop access that cannot be found by anti-virus? (I know it could be put in the list of exception on the anti-virus). 2. What can I do to be 100% sure that absolutely no one could access my computer (or just see my screen from their computer).
I have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
I am currently running a tablet netbook with Windows 7 pro x32. It's not powerful enough to run photoshop very well, and my license wouldn't let me put it on there anyway. However, this netbook is a tablet. I'd like to use it for graphics, as it has a Wacom digitizer.
What I'm interested in doing is running a VNC to access my desktop (running Windows 7 pro x64) and be able to control photoshop from my tablet.
Currently, I've tried Windows Remote Desktop, and while it works fairly well, two things are wrong:
1) Mouse/Tablet input seems to be compressed. This turns my curves into straight lines unless I go reeeeally slowly. Is there any way to change this?
2) There seems to be an option for plug-and-play drivers to be transferred, is there *any* way to make pressure sensitivity work?
I have looked into other solutions, such as TightVNC, UltraVNC, and LogMeIn Free, but VNC isn't very secure (and I don't want to deal with SSH tunneling) and LogMeIn Pro is expensive, while LogMeIn Free is limited.
On that note, I haven't been able to find out *anything* relating to the security of Windows Remote Desktop. Is it encrypted, or what? Security is important to me, as I am running both the desktop and the netbook on networks that I have no control over, and are inherently insecure.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
I am trying to configure Remote Desktop Access to work over the internet. Remote Desktop Access works on my local network.
Both of my computers are on Windows 7 Professionnal. My router is a Belkin F9K1002.
I followed the official widows tutorial. I forwarded the necessary port on my router (I switched from port 3389 to 50000, in case 3389 was blocked by my isp).
Every time I try to connect I get
"Remote Desktop can't connect to the remote computer for one of these reasons:
1)Remote access to the server is not enabled
2)The remote computer is turned off
3)The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
Today when I loaded windows 7 I clicked on my account and after a slight delay a message appeared "preparing your desktop". When it appeared it was a new desktop and a message on the task bar stated "you can not access you files and folders". I have followed a few steps about unlocking locked accounts but my account wasn't locked. A few other things have been happening over the last week so I am worried I might have a virus.
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
I am using a belkin flip to switch from a new computer to old computer and vice versa. Many a times, when I press the remote button to flip THE MOUSE FREEZEZ. i AM FORCED TO RESTART and my data gets lost. Recently I had to reinstall Dragon Naturally Speaking 11 professional due to having lost all the data in the user profile. Both the computers are Windows 7 ultimate 32 bit.
I want to remotely access to my office another PC which is working on win2000. I have administrator rights of that PC and trying to connect as remotely but none. Kindly give me procedure for access. I am using win seven.
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
I did a bit of searching, but I seem to be the only person I can find with this issue (most people seem to have the opposite issue).
I want to connect to my servers using Windows 7 Remote Desktop, but I would really like to do so in MORE than 256 colors.
Everyone I see online is asking how to get it to only display in 256 colors. Well mine will only display in 256 mode and I want it in full color if possible.
I checked the display setting in Remote Desktop and it's set to 32bit, but it never actually does show that way.
Edit: I should mention these servers are mostly running Windows Server 2003 if that makes a difference.
I'm using Win7 Professional at home and winxp at my office. I can connect fine from home to office but can't connect from my office to home. I have gone through all of the google searchs and all of the posts on this forum without any luck. I have checked that my modem has port 3389 forwarded. I have confirmed that it's listening on that port. I have checked all the firewall settings, and even turned off the firewall and still can't connect.
I am trying to use the windows remote desktop. I am using It on 2 windows home premium computers. I tired to turn firewalls on both computer off just to check. One of the computers has DSL and know router. When I try to connect I get a certificate. I attach the certificate. I tried just Installing It and than try to connect. What happens Is It just goes back to the windows remote desktop but know connect. I turned remote desktop on.
Can someone recommend a remote desktop software or app that would allow me to remotely control resources on my HTPC (run apps, manage torrents, etc) without disrupting media center playback? Basicly make my laptop act as a second monitor to the htpc.
The laptop would be on my local network via wireless.
I have a windows 7 home premium laptop that I am trying to connect to my office PC via VPN. I can make the vpn connection and login to my office PC. I launch into my Outlook but when I exit and try to go to another desktop program I get disconnected everytime from my session. what can I do?
I'm on my work VPN and trying to remote into my computer at work using Windows Remote desktop. I enter my computer name and user name in the Remote Desktop Connection window. I am then prompted to enter my password. I enter my password and that dialog goes away, but then nothing happens. All that is left is the first Remote Desktop Connection dialog with some fields grayed out. Even if I enter in the wrong password, I don't get an error message.
i have learned via internet that Windows 7 Home Premium computer cant b accessed remotely but it can access computer remotly ( with professional or ultimate versions). Unfortunately i have Home Premium, i have found a Patch " rdp concurrent" which they say can allow Home Premium Versions to be accessed remotly. Is this safe to use this patch? i want remote connection over the internet, how to make a remote connection so that i can login remotely whenever i want?
Any way to add Remote Desktop (host) to Windows 7 home?I upgraded to home premium and now found that I can not remote desktop TO this pc Obviously I could upgrade from home to PRO but didn't know if I can just "add" RDP to this home PC at all I realize there are 3rd party software vendors I can use (think I saw VNC, mesh, go2mtg, etc)
I have two Windows 7 machines which both flawlessly access my Home Server 2011 via Remote Desktop.When I attempt to access the Hone Server via Live Live Mesh "Connect to this Computer" I receive a log in screen request for a Ctrl-Alt-Del. Clicking the Remote Desktop Window link to issue the request has no affect. No other action is available except to disconnect from the server.
