Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
View 7 RepliesCurrently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
View 2 Replies View RelatedCurrently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
View 1 Replies View RelatedI'm having some trouble with remote desktop connection. I have successfully configured my desktop to remotely access it. But every time I start up remote desktop connection it prompts me to "Save File As ... *.xps". The application is driven by the mstsc.exe process, so it starts up when I start my remote session. If I try to save it, it immediately prompts me again for the same thing. Also my One Note Application starts up on my client pc (Laptop) and is also triggered by the RDP connection process.
Here is what I have already tried:
- Tried to just end the Save As .. Application thru windows task manager, but since it is driven by the mstsc.exe, It also closes the remote session
- I Also checked my remote desktop settings on my laptop to check and see if there are any programs listed to start up when I connect, but no progams are set!
Also every once in a while it actually starts up without the prompt and I actually experience a perfect and smooth remote session!
I once seen a user that had RDP in his Start Menu and there was a flyout of several saved connections and below the saved connections was a list of the most recent connections. How do I setup saving a list of most frequently used RDP connections?
View 3 Replies View RelatedToday is the first time I have had to access my work pc remotely so went out and bought Windows 7 Home. I accessed my works VPN network via the browser (have an icon in my taskbar called "network Connect" which tell me how long I have been connected for), I was able to ping my work PC but when I tried connect via Remote Desktop I was getting an error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote Access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
View 3 Replies View Relatedi 'm looking for a program , freeware that let me manage windows ,like save windows position and transparency something likeWinWarden but this doesn't save settings about windows.
View 3 Replies View RelatedWhat is the rational (if there actually is any) of not allowing one to save window size & position (other than the last window opened)?
Without using a 3rd party program (which seems to be the norm with Win7) has someone found a way to allow saving resized windows other than the last window opened??
"Any know how to fix this issue? Running windows 7..Whenever I right click on a link to open in another window...the window opens at the bottom of the page...how can i configure it to open in the middle? "
View 9 Replies View RelatedI have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
View 1 Replies View RelatedOne of the windows on the taskbar just switched position from being on the far left end of the taskbar to go into far right side of the taskbar. is this normal or is this some virus or something?
View 1 Replies View RelatedSomething I like and can't seem to get Win 7 to do for me. I open a window for my computer, size it and set it at the upper left of my screen. I open folders in new windows; i.e. open the D: Drive and position it next to the window I opened for my computer. Close both. When I open my computer again it is now in the position where I opened the D: Drive. How do I get specific windows to retain the size and position I set each time I open them rather then simply pick up the size and position of the last window I opened?
View 5 Replies View RelatedSo. Running XP.2 (can't run XP.3; it kills Adobe's CS2 apps, which I need). Had a spare partition. Before putting Ubuntu back on it, I figured I'd install the Win7 Ultimate that'd come (unused) with another computer.
(The install was smooth enough. The updates were slower'n snail poo. But after turning almost everything back to the Windows Classic theme, it's almost bearable. Only two of my devices were unrecognized and unsupported, and they're no surprise; the tablet's nearly twenty years old (even the manufacturer doesn't support it) and the scanner's older still.)
Installed copies of my must-have software--Office 2003 (I've had to suffer through Office 2007, and will never ever ever put it on a machine I have to work on), Photoshop and InDesign CS2, Winamp .
I got my first real exposure to User Access Levels when, the first time I ran Word 2003, Win7 wouldn't let me save the new Normal.dot. I later went and copied my much-customized normal.dot from its XP location, so the file's at least there.
But: I run Word on a portrait-oriented monitor. Under XP, Word remembers the window size and position, and it's exactly where I want it, all the time. So far, every time in Win7 I've opened up an existing document, the Word window has instantly shrunk to around 40% of the size it's supposed to be.
I'm curious if this is a cling-on permissions issue with normal.dot under Win7, or a registry setting that simply hasn't gotten made (in XP, Word seemed to take care of remembering where I put and closed it by itself). Did a search, but didn't see any questions that seemed to relate to this, so I'll ask.
(I'm trying to like Windows 7, I really am. I don't much, but I'm trying. I don't mind the thought of getting a new tablet, and I've got another scanner I can use. But I really dislike having to resize my windows every time I open a document--I spend 75% of my time on the PC in Word, just writing.)
And again, I hate, loathe and despise Office 2007 and 2010. I do most emphatically not like the "death by honey and marshmallows" interface that microsoft seems to think is so great.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies View RelatedI know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
Every time I load up windows the icons are in the default position and not where I left them, any ides how to fix this?
View 3 Replies View RelatedWe have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies View RelatedA few days ago (16th July 2012) the Resident Shield of my AVG Internet Security 2012 reported an issue with the 'Services.exe' file located in C:WindowsSystem32 - specifically stating 'Trojan horse dropper.Generic_c.MMI' and saying that the 'Object is white-listed (critical/system file that should not be removed'.
I use the following command in the cmd box: "sfc /scanfile=c:windowssystem32services.exe". After doing this I had no more problems reported with services.exe.
Problem 1:However, now, my desktop icon arrangement has reset and grouped to the left side of the screen. I can re-position each icon however, upon reboot or the desktop Refresh command all Icons return to the left - to exactly the same position. Auto arrange icons is turned off and align to grid can be turned off however, it keeps turning itself on upon reboot.Icon re-positioning was always retained previously - this problem has only just appeared.
Problem 2:Upon double-clicking the desktop Computer icon I am now unable to permanently set the view from 'Tiles' to 'Details' (I can, temporarily) - this was never the case until the issue above (i.e. all explorer/folder views were permanently set to detail via 'folder options/view/apply folders').So, something has changed very recently. I've ran full scans using avg (virus,tracking and rootkit), malewarebytes mbam, spybot but the problem persists. I've re-checked system files using 'sfc /verifyonly' and no 'integrity violations' were found.
I have discovered a frustrating problem when i attempt to customise my desktop background. While i have had no problems selecting the desired images or an problems with the slideshow itself i an unable to alter the picture position, meaning that the picture position is permanently on stretch which distorted the pictures. I select Centre from the drop down bar and then save the changes but it makes no difference, the pictures remain stretched and when i re-open the Desktop Background menu the Picture Position has reverted to Stretch
View 2 Replies View RelatedI'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
i have a 2 monitor setup, one main monitor and my tv as second monitor which i use to watch movies, online stuff, Internet etc.so when i eat and watch a Internet show, then close the window and turn my tv off / switch channels or whatever and want to open firefox later to surf on my main screen it pops up on the second monitor which i don't see since i need to switch back to the pc channel on my tv. i need to select it and use the windows-key + arrows to switch it around.
View 9 Replies View RelatedWhen I save files from programs (aka Word, Photoshop, anything)onto my Desktop, I cannot see them directly from the actual desktop. I can only see them when I open up Explorer, and click on the Desktop tab. Then all my files are visible. I thought they were hidden...but they apparently aren't.It possibly seems like a refresh error.I did find a way around this..I go to Control Panel >> Appearance and Personalization >> Under Folder Options >> Show Hidden Files and Folders. I click on Reset folders, Apply, and then OK, and my missing files pop up on my actual desktop.But from then on, any new files I save are only visible in Explorer again. I don't want to go to Control Panel everytime I have to save something to the desktop? I've run Norton and Microsoft Essentials and I have no viruses. What can I do?I just found out I can also see my files after pressing f5 (refresh)so I guess the problem is HOW do I get my computer to refresh the desktop automatically?
View 2 Replies View RelatedI am using a belkin flip to switch from a new computer to old computer and vice versa. Many a times, when I press the remote button to flip THE MOUSE FREEZEZ. i AM FORCED TO RESTART and my data gets lost. Recently I had to reinstall Dragon Naturally Speaking 11 professional due to having lost all the data in the user profile. Both the computers are Windows 7 ultimate 32 bit.
View 4 Replies View Relatedi would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies View RelatedI have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
View 2 Replies View RelatedHow can I use the remote desktop with Windows seven x64?
View 2 Replies View RelatedI did a bit of searching, but I seem to be the only person I can find with this issue (most people seem to have the opposite issue).
I want to connect to my servers using Windows 7 Remote Desktop, but I would really like to do so in MORE than 256 colors.
Everyone I see online is asking how to get it to only display in 256 colors. Well mine will only display in 256 mode and I want it in full color if possible.
I checked the display setting in Remote Desktop and it's set to 32bit, but it never actually does show that way.
Edit: I should mention these servers are mostly running Windows Server 2003 if that makes a difference.
Can't save large file to Windows & desktop. Keeps telling me I don't have room. Is there a setting in Windows 7 that restricts file size on the desktop?
View 3 Replies View RelatedMy computer has taken quite a beating last night, power went out 4 times sporadically, thankfully I have a voltage regulator. The funny thing is.. before the first blackout, I had rearranged a couple of files/folders, and desktop icons, and whenever I would turn the computer back on,everything was laid off the way it was before I arranged it, who is used to TPLINK wireless adapters, is it normal that whenever the adapter's driver gets outdated it will let you know with a BSOD?
View 6 Replies View RelatedI'm using Win7 Professional at home and winxp at my office. I can connect fine from home to office but can't connect from my office to home. I have gone through all of the google searchs and all of the posts on this forum without any luck. I have checked that my modem has port 3389 forwarded. I have confirmed that it's listening on that port. I have checked all the firewall settings, and even turned off the firewall and still can't connect.
View 6 Replies View RelatedI am trying to use the windows remote desktop. I am using It on 2 windows home premium computers. I tired to turn firewalls on both computer off just to check. One of the computers has DSL and know router. When I try to connect I get a certificate. I attach the certificate. I tried just Installing It and than try to connect. What happens Is It just goes back to the windows remote desktop but know connect. I turned remote desktop on.
View 9 Replies View Related