Recent Change To System - Can't Re-position Desktop Icons + More

Jul 18, 2012

A few days ago (16th July 2012) the Resident Shield of my AVG Internet Security 2012 reported an issue with the 'Services.exe' file located in C:WindowsSystem32 - specifically stating 'Trojan horse dropper.Generic_c.MMI' and saying that the 'Object is white-listed (critical/system file that should not be removed'.

I use the following command in the cmd box: "sfc /scanfile=c:windowssystem32services.exe". After doing this I had no more problems reported with services.exe.

Problem 1:However, now, my desktop icon arrangement has reset and grouped to the left side of the screen. I can re-position each icon however, upon reboot or the desktop Refresh command all Icons return to the left - to exactly the same position. Auto arrange icons is turned off and align to grid can be turned off however, it keeps turning itself on upon reboot.Icon re-positioning was always retained previously - this problem has only just appeared.

Problem 2:Upon double-clicking the desktop Computer icon I am now unable to permanently set the view from 'Tiles' to 'Details' (I can, temporarily) - this was never the case until the issue above (i.e. all explorer/folder views were permanently set to detail via 'folder options/view/apply folders').So, something has changed very recently. I've ran full scans using avg (virus,tracking and rootkit), malewarebytes mbam, spybot but the problem persists. I've re-checked system files using 'sfc /verifyonly' and no 'integrity violations' were found.

View 9 Replies


ADVERTISEMENT

Desktop Icons Not Staying In Position?

Aug 31, 2011

Every time I load up windows the icons are in the default position and not where I left them, any ides how to fix this?

View 3 Replies View Related

Desktop Icons - Allow Or Prevent Themes To Change

Jan 3, 2009

How to Prevent or Allow Themes to Change Windows 7 Desktop Icons ?

View 0 Replies View Related

Desktop Icons Won't Delete And Not Show Any Change Until Refresh

Aug 17, 2010

I just tonight installed Windows 7 Ultimate 64 onto my system. Right away I noticed the issue. Icons on the desktop won't delete or won't show changes such as renaming right away. I have to refresh the desktop for the changes to take effect. I've tried restarting, I've installed all the current updates... nothing!

View 9 Replies View Related

Cannot Change System Icons Setting

Jan 15, 2013

So i installed windows 8 transformation pack, and then window update to service pack 1 now my volumn network action center etc cannot be accessed. Sorry for crappy grammar, typing this from an ipad as i am currently restoring back.

Uh, i tried the solution of group policy editing and got a error message with three choice about mmc. i tried sfc scan and it get disrupted at 14 percent and said that the scan cannot be completed. I tried deleting hideScanetwork and rebooted but it doesnt work. I tried editing the dword 00000000 for hidesca but it doesnt work.

View 3 Replies View Related

Windows 7 - How To Change Position Of Folder

Aug 16, 2011

How can I change the position of the folder in Windows 7? Example: If there are three folder in the drive; Suppose the following names:

1 - A
2 - B
3 - C.

If I want to change their arrangement i.e: I want to place the folder C instead of folder A. But when I do it i.e:by dragging it. It says: Move to A. So how can i do it?

View 1 Replies View Related

Change User Account Picture Position From Middle?

Aug 21, 2011

how to change user account picture position from middle at windows 7 log on screen

View 4 Replies View Related

Change The Startup Position To Center Screen Or Default Location?

Oct 13, 2012

we can change the startup position to center screen or default location, etc...

But how i can make it to startup in this location:

View 1 Replies View Related

Remote Desktop Does Not Save Window Position For Windows 7

Dec 16, 2012

Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.

View 1 Replies View Related

Remote Desktop Does Not Save Window Position For Windows 7 Ultimate

Dec 17, 2012

Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.

View 2 Replies View Related

Remote Desktop Does Not Save Window Position For Windows 7 Ultimate?

Dec 17, 2012

Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.

View 7 Replies View Related

Desktop Background Menu The Picture Position Has Reverted To Stretch?

Oct 29, 2011

I have discovered a frustrating problem when i attempt to customise my desktop background. While i have had no problems selecting the desired images or an problems with the slideshow itself i an unable to alter the picture position, meaning that the picture position is permanently on stretch which distorted the pictures. I select Centre from the drop down bar and then save the changes but it makes no difference, the pictures remain stretched and when i re-open the Desktop Background menu the Picture Position has reverted to Stretch

View 2 Replies View Related

Recent Change In Software/hardware?

Jan 8, 2013

I recently built a new computer with these specs

[code]...

I had installed windows 7 on the harddrive prior to building the computer, I put everything together and I powered it up, it beeps, first screen is the Gigabyte BIOS page, then it seems it's about to start windows and then jumps to "recent change in software/hardware" screen, where I have the option to either start normal or safe, etc. (I cant go back to last know working config because Windows 7 was freshly installed.)I hit enter and again same thing.I have a repair DVD so I can boot from the disk and hit Repair. I put it in the drive, I powered on, hit F9 to change the BIOS so it will boot from the CD/DVD, then enter, again, same "recent change in software/hardware" comes up.So I decided to power down and power up, DVD-ROM light comes on and then beep, gigabyte bios screen comes up, scripts come up, says boot from CD/DVD and then windows logo for about a sec and again "recent change in software/hardware" comes up, this is an ever ending cycle.I have noticed that the DVD-ROM only lights up for a couple seconds only when I turn the computer on, when the screen shows Boot from CD/DVD I dont see the light on, this is a new SATA samsung DVD-RW that I had for about a year, I never used it before becuase my old computer didnt have any SATA. This new gigabyte motherboard is all SATA.I am not sure if the DVD-RW is working, either way I ordered a new DVD-RW SATA that should be coming in today.

View 3 Replies View Related

Windows Failed To Start / Recent Hardware Or Software Change

Feb 21, 2013

when i am formatting my laptop with windows7 usb drive it completed 85% and after that i am geeting the below error: windows boot manager windows failed to start. A recent hardware or software change might be the cause. to fix problem:

1. insert your windows installation disc and restart your computer.
2. choose your language settings, and then click "next."
3.click "repair your computer."

if you do not have this disc, contact your system administrator or computer manufacturer for assistance.when i click on enter it go to another window where it shows us to press F8 but when i m pressing f8 it goes to same error window.

1) when i restarted it start with dell logo i press F2,F12,F10 all three i have press to open bios setting but nothing works it will go to same window so now i a not able to get into windows bios setup

2) i tried to format it again as my dvd writer does not work so i tried with usb when i restarted my laptop it does not load the files and agin redirect to the same error window.

View 2 Replies View Related

Windows Failed To Start, A Recent Hardware Or Software Change Might Be The Cause

Oct 4, 2012

I am currently using a different computer to ask for help, Everytime I startup my computer it says "Windows failed to start. A recent hardware or software change might be the cause. Of course, normally their is Launch Startup Repair, And Start windows normally. If I press enter on either of those it says "windows is loading files" It does that twice with a white bar then returns me to the same screen with the same 2 options. It is the same problem no matter what, I have tried pressing enter on startup to go to safe mode, but safe mode does the exact same thing. I tried going to the system recovery page, it does the same thing, cannot access anything on my computer. But, if I enter on Star windows normally twice, it does indeed say starting windows, then back to same screen first time, Then second time it will go to Aptio setup utility-Copyright (c) 2011 american megatrends, inc. It has the Main, Advanced, Security, Boot, Exit options with computer specs, product information so on so forth. I have absolutely no idea what any of these do, so I usually exit and again the process repeats, I go back to the 2 options, they either bring me to that Aptio Setup page, or back to the same page. It's frustrating that I cant use system recovery since it goes to the same page and Startup repair wont work, I have absolutely no idea what to do and am in need of serious help. This problem occured when a windows thing popped up saying "A virus may be on your computer" generally I clicked it, my computer shut down automatically and thats what started this whole repetetive process.

View 9 Replies View Related

Windows 7 64-bit Failed To Start A Recent Hardware Or Software Change?

Jan 10, 2013

After a power failure my windows 7 system will not boot....tried startup repair 3 times also from the dvd. all safemodes will not boot, when the windows animation starts the cpu restarts. also system restore to an earlier time fails.

View 2 Replies View Related

Jump Lists - Change Number Of Recent Items To Display

May 27, 2009

How to Change the Number of Recent Items to Display in Windows 7 Jump Lists ?

View 0 Replies View Related

Start Menu - Change Number Of Recent Programs To Display

Jul 15, 2011

How to Change the Number of Recent Programs to Display in Windows 7 Start Menu ?

View 0 Replies View Related

Windows 7 Fails To Start - Recent Hardware/Software Change Message

Jan 7, 2012

I'm running Windows 7 64 bit on a gigabyte ga-x58a-ud3r

A few weeks ago, I shut down my PC completely for a regular cleaning. I do a regular cleaning once a month, this was the first time I had an issue.

After I finished, I powered up the machine, and Windows would continually fail to start - rebooting at some point while the Logo load screen was up.

After several Google searches, I tried pretty much everything I could think of or advice i came across - Nothing worked. I could not boot from the Win7 Disk, System Repair did not work, advanced boot options did not work, etc. At this point I thought the HDD might be bad (WD Caviar Black 1 TB).

So I went and purchased a new HDD, the same model actually as it was on sale. Windows installed fine, everything got up and running with no issue.

I then took my HDD which I had believed had failed and plugged it into a Thermaltake BlacX Docking station and I was able to locate the drive in the device manager after scanning for new hardware.

I actually was able to go into the hard drive and recover the few bits of data I hadn't backed up (mostly gaming files). The HDD was completely fine. Fast forward a few weeks, and feel free to laugh at me here - I'm in the exact same situation with the new HDD once again after cleaning my PC case.

So, I'm not sure what is happening. I've rebooted the PC many times without issue but today was the first time that I fully powered down the PC to do a cleaning.

I suspect something is causing Windows to fail to recognize the HDD itself, but honestly this is way beyond my knowledge how to fix. I took a risk and I removed the sata cable from the "GSata" slot on the motherboard and put it into one of the standard ICHR10 - to no effect.

I've once again exhausted every option I actually know how to safely do, advanced boot options, repair attempt from Win7 Disk, etc. Nothing is working. I'm debating running out yet again and grabbing a cheap HDD just to get myself up and running again, but I thought I'd turn to Tom's Hardware first for some ideas - and because I don't want to be going through this issue everytime I want to give the PC case a good cleaning.

View 18 Replies View Related

Desktop And Start Icons All Changed To Paint Icons?

Aug 9, 2012

All my desktop and start icons have changed to paint icons on my other laptop. When I click on any of them they try to open in paint program.

View 7 Replies View Related

All Icons On Desktop And Computer Have Turned To Notepad Icons

Dec 26, 2012

all my icons on desktop and computer have turned to notepad icons... and they open with some text on notepad... looking for a solution to go back to normal settings...

View 3 Replies View Related

Desktop Icons Keep Reverting Back To Default Icons?

Jan 8, 2013

At start up the icons are back on the grid and pushed to the left.

View 3 Replies View Related

Program Icons Are Missing (NOT Desktop Icons)

Jan 5, 2013

Some of the icons normally showing what a program type is are missing now. I HAVE all the DESKTOP icons and those in the system tray. But in Windows Explorer lists or in Word Perfect and Word lists of file names, many of the small icons that normally appear next to a program's name, or showing what type of document or file it is, are now missing. Not all, just some. I have mostly open square boxes. It doesn't matter whether I'm looking at a list of files I've created, or looking at the items in various system folders: most are just empty open squares instead of the individual icons. I have Windows 7 64-bit OS , both Mozilla 17 and IE9 browsers.

View 2 Replies View Related

Notification Area Icons - Hide Or Show System Icons And Notifications

Jan 16, 2009

How to Hide or Show System Icons and Notifications in Windows 7 ?

View 0 Replies View Related

BSOD Whilst System Idle, No Recent Changes Made

May 31, 2012

in the last 2 days I have received 2 BSOD's, the system has been running fine for about 5-6 months with no issues.

I couldn't get the perfmon /report, I get a message saying an error occured whilst generating the report.

Spec;
Windows 7, retail, installed fresh 5-6 months ago.

View 1 Replies View Related

All Desktop Icons Changed Into Vlc Icons?

Jul 15, 2011

all my desktop icons turned into vlc icons,

View 3 Replies View Related

Desktop Icons Changed Into Vlc Icons?

Jul 23, 2011

all icons changed to vlc(google talk,picasa,recycle bin etc when i was downloading a video from Internet i need a help

View 1 Replies View Related

Desktop Icons Changed Into Vlc Icons

Jul 30, 2011

All my desktop icons changed into vlc icons

View 1 Replies View Related

Hiding Desktop Icons If Not Viewing Desktop?

Apr 23, 2012

I've been looking around for something that can hide my desktop icons (or basically anything except my background & bottom navigation bar) if I'm not viewing the desktop.In other words, when I have a (not full screen) window open, I want to be able to see my desktop background but not the icons on it. When I "view" the desktop, or don't have anything on top of it, I want the icons back.

View 6 Replies View Related

"Windows Failed To Start.A Recent Software Or Hardware Change Might Be The Cause."

Jun 6, 2011

I've got a problem that was sprung on to me yesterday, I continualy get blue screens of death on the startup of windows. I'll post the message and then how it happened...(my computer is a dell xps m1530 running windows 7 professional 64 bit) TURN ON COMP "Windows failed to start.A recent softwaare or hardware change might be the cause."Gives me an option for Launch Startup Repair and Start windows normally Both of these options gives me this: BLUE SCREEN: "A problem has been detected and windows has been shut down to prevent damage to your computer

CLFS.SYS
PAGE_FAULT_IN_NONPAGED_AREA
(the normal blurb)

[code]....

The only changes I made (and think may be the problem) was I was updating/ fooling around with my ASIO drivers. I was using a recent project of mine, a converted acoustic to electric drumkit with BFD lite standalone (which uses ASIO4all). All was working well and i have used this in the past, however, i was trying to find a way to run 2 applications with ASIO4all so i could play along to a track without havigng to bring my external soundcard to the other room....so I installed winamp, foobar2000, a multi asio app from steinburg and the plugins to allow winamp and foobar to use asio output. The weird thing in the blue screen didnt crash my computer...I just did a normal restart to 'flush' my computer after all those installs and tinkering around, and the blue screen hapened?

View 1 Replies View Related

"Windows Failed To Start. A Recent Hardware Or Software Change Might Be The Cause"

Sep 3, 2012

When I start up my computer, a black screen pops up saying "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:....I don't have the disk, though. What do I do!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved