When I start up my computer, a black screen pops up saying "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:....I don't have the disk, though. What do I do!
View 1 Replieswhen i am formatting my laptop with windows7 usb drive it completed 85% and after that i am geeting the below error: windows boot manager windows failed to start. A recent hardware or software change might be the cause. to fix problem:
1. insert your windows installation disc and restart your computer.
2. choose your language settings, and then click "next."
3.click "repair your computer."
if you do not have this disc, contact your system administrator or computer manufacturer for assistance.when i click on enter it go to another window where it shows us to press F8 but when i m pressing f8 it goes to same error window.
1) when i restarted it start with dell logo i press F2,F12,F10 all three i have press to open bios setting but nothing works it will go to same window so now i a not able to get into windows bios setup
2) i tried to format it again as my dvd writer does not work so i tried with usb when i restarted my laptop it does not load the files and agin redirect to the same error window.
I am currently using a different computer to ask for help, Everytime I startup my computer it says "Windows failed to start. A recent hardware or software change might be the cause. Of course, normally their is Launch Startup Repair, And Start windows normally. If I press enter on either of those it says "windows is loading files" It does that twice with a white bar then returns me to the same screen with the same 2 options. It is the same problem no matter what, I have tried pressing enter on startup to go to safe mode, but safe mode does the exact same thing. I tried going to the system recovery page, it does the same thing, cannot access anything on my computer. But, if I enter on Star windows normally twice, it does indeed say starting windows, then back to same screen first time, Then second time it will go to Aptio setup utility-Copyright (c) 2011 american megatrends, inc. It has the Main, Advanced, Security, Boot, Exit options with computer specs, product information so on so forth. I have absolutely no idea what any of these do, so I usually exit and again the process repeats, I go back to the 2 options, they either bring me to that Aptio Setup page, or back to the same page. It's frustrating that I cant use system recovery since it goes to the same page and Startup repair wont work, I have absolutely no idea what to do and am in need of serious help. This problem occured when a windows thing popped up saying "A virus may be on your computer" generally I clicked it, my computer shut down automatically and thats what started this whole repetetive process.
View 9 Replies View RelatedAfter a power failure my windows 7 system will not boot....tried startup repair 3 times also from the dvd. all safemodes will not boot, when the windows animation starts the cpu restarts. also system restore to an earlier time fails.
View 2 Replies View RelatedI've got a problem that was sprung on to me yesterday, I continualy get blue screens of death on the startup of windows. I'll post the message and then how it happened...(my computer is a dell xps m1530 running windows 7 professional 64 bit) TURN ON COMP "Windows failed to start.A recent softwaare or hardware change might be the cause."Gives me an option for Launch Startup Repair and Start windows normally Both of these options gives me this: BLUE SCREEN: "A problem has been detected and windows has been shut down to prevent damage to your computer
CLFS.SYS
PAGE_FAULT_IN_NONPAGED_AREA
(the normal blurb)
[code]....
The only changes I made (and think may be the problem) was I was updating/ fooling around with my ASIO drivers. I was using a recent project of mine, a converted acoustic to electric drumkit with BFD lite standalone (which uses ASIO4all). All was working well and i have used this in the past, however, i was trying to find a way to run 2 applications with ASIO4all so i could play along to a track without havigng to bring my external soundcard to the other room....so I installed winamp, foobar2000, a multi asio app from steinburg and the plugins to allow winamp and foobar to use asio output. The weird thing in the blue screen didnt crash my computer...I just did a normal restart to 'flush' my computer after all those installs and tinkering around, and the blue screen hapened?
net book wont start. i turn it on and it says this----"status 0xC000000F windows failed to start. a recent hardware or software change might be the cause" this is on a acer aspire 1 netbook. it asks for a disk to repair it but the net book does not have a cd drive.
View 14 Replies View RelatedI'm running Windows 7 64 bit on a gigabyte ga-x58a-ud3r
A few weeks ago, I shut down my PC completely for a regular cleaning. I do a regular cleaning once a month, this was the first time I had an issue.
After I finished, I powered up the machine, and Windows would continually fail to start - rebooting at some point while the Logo load screen was up.
After several Google searches, I tried pretty much everything I could think of or advice i came across - Nothing worked. I could not boot from the Win7 Disk, System Repair did not work, advanced boot options did not work, etc. At this point I thought the HDD might be bad (WD Caviar Black 1 TB).
So I went and purchased a new HDD, the same model actually as it was on sale. Windows installed fine, everything got up and running with no issue.
I then took my HDD which I had believed had failed and plugged it into a Thermaltake BlacX Docking station and I was able to locate the drive in the device manager after scanning for new hardware.
I actually was able to go into the hard drive and recover the few bits of data I hadn't backed up (mostly gaming files). The HDD was completely fine. Fast forward a few weeks, and feel free to laugh at me here - I'm in the exact same situation with the new HDD once again after cleaning my PC case.
So, I'm not sure what is happening. I've rebooted the PC many times without issue but today was the first time that I fully powered down the PC to do a cleaning.
I suspect something is causing Windows to fail to recognize the HDD itself, but honestly this is way beyond my knowledge how to fix. I took a risk and I removed the sata cable from the "GSata" slot on the motherboard and put it into one of the standard ICHR10 - to no effect.
I've once again exhausted every option I actually know how to safely do, advanced boot options, repair attempt from Win7 Disk, etc. Nothing is working. I'm debating running out yet again and grabbing a cheap HDD just to get myself up and running again, but I thought I'd turn to Tom's Hardware first for some ideas - and because I don't want to be going through this issue everytime I want to give the PC case a good cleaning.
How to Change the Number of Recent Programs to Display in Windows 7 Start Menu ?
View 0 Replies View RelatedAfter I upgrade my laptop from win7 home premium to win7 ultimate during setup my system suddenly pop up saying "window fail to start. A recent hardware or software might be the cause." And below I got only two option lunch startup repair(recommended) and start windows normally i tried windows start normally but just page come and then get restart and then I tried startup repair but it failed saying "Windows Startup Repair can't automatically fix the problem" I even try to install win 7 newly but boot dont read it...
View 3 Replies View RelatedI unfortunately listened to the husband of one of my wife's friends and ran CCleaner on my Win 7 PC and now the Recent Items list on my Start Menu, which I use a lot, is totally fouled up. The settings are correct and I've edited the registry but the number of items displayed is never consistent, never more than 6, and sometimes disappearing completely, whereas I have it set to store 10 items.
View 1 Replies View RelatedI recently built a new computer with these specs
[code]...
I had installed windows 7 on the harddrive prior to building the computer, I put everything together and I powered it up, it beeps, first screen is the Gigabyte BIOS page, then it seems it's about to start windows and then jumps to "recent change in software/hardware" screen, where I have the option to either start normal or safe, etc. (I cant go back to last know working config because Windows 7 was freshly installed.)I hit enter and again same thing.I have a repair DVD so I can boot from the disk and hit Repair. I put it in the drive, I powered on, hit F9 to change the BIOS so it will boot from the CD/DVD, then enter, again, same "recent change in software/hardware" comes up.So I decided to power down and power up, DVD-ROM light comes on and then beep, gigabyte bios screen comes up, scripts come up, says boot from CD/DVD and then windows logo for about a sec and again "recent change in software/hardware" comes up, this is an ever ending cycle.I have noticed that the DVD-ROM only lights up for a couple seconds only when I turn the computer on, when the screen shows Boot from CD/DVD I dont see the light on, this is a new SATA samsung DVD-RW that I had for about a year, I never used it before becuase my old computer didnt have any SATA. This new gigabyte motherboard is all SATA.I am not sure if the DVD-RW is working, either way I ordered a new DVD-RW SATA that should be coming in today.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedA few days ago (16th July 2012) the Resident Shield of my AVG Internet Security 2012 reported an issue with the 'Services.exe' file located in C:WindowsSystem32 - specifically stating 'Trojan horse dropper.Generic_c.MMI' and saying that the 'Object is white-listed (critical/system file that should not be removed'.
I use the following command in the cmd box: "sfc /scanfile=c:windowssystem32services.exe". After doing this I had no more problems reported with services.exe.
Problem 1:However, now, my desktop icon arrangement has reset and grouped to the left side of the screen. I can re-position each icon however, upon reboot or the desktop Refresh command all Icons return to the left - to exactly the same position. Auto arrange icons is turned off and align to grid can be turned off however, it keeps turning itself on upon reboot.Icon re-positioning was always retained previously - this problem has only just appeared.
Problem 2:Upon double-clicking the desktop Computer icon I am now unable to permanently set the view from 'Tiles' to 'Details' (I can, temporarily) - this was never the case until the issue above (i.e. all explorer/folder views were permanently set to detail via 'folder options/view/apply folders').So, something has changed very recently. I've ran full scans using avg (virus,tracking and rootkit), malewarebytes mbam, spybot but the problem persists. I've re-checked system files using 'sfc /verifyonly' and no 'integrity violations' were found.
I'm configuring Windows 7 Enterprise for my office. I've gone through and installed all the programs. I then do the deal where I log in locally and copy my profile and make it the Default profile.
Anyway, when I log in using my profile (Domain Admin) no problems! When i log in as a typical user (without admin rights) I don't see anything on the left side of the start menu (recent programs). I open Word, Excel, etc. but nothing is ever added to the recentfavorite program list.
How to Change the Number of Recent Items to Display in Windows 7 Jump Lists ?
View 0 Replies View RelatedGrayed out recent program list in start menu, How to enable it?
View 5 Replies View RelatedWell for some reason windows 7 has decided that it will not let me remove the recent programs from this liste the ones that i well honestly do not use. It just won't let me do that but yet i could on Windows Vista.
View 9 Replies View RelatedI gave up trying to get the Recent Documents link to work on the Start Menu - what is the point of them being in alphabetical order? So I just created a shortcut to the Recent folder on my desktop and started using that. But even there I can't keep it sorted in 'date modified' order. It stays that way for an hour or so, but when I go back the folder has sorted itself in alphabetical order again, and I have to start right-clicking again! Maddening. I did once get the link on the Start Menu to sort in date order, but I don't recall how I did it sadly - I certainly can't get it to work now. But surely the folder itself should stay in the sort view I set for it? Why does it change back all by itself and how can I fix it so that it stays in date modified order?
View 2 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
A few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
View 7 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
View 2 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
View 1 Replies View RelatedI have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
View 8 Replies View RelatedI left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
View 3 Replies View RelatedI'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
View 9 Replies View RelatedI have a serious issue, this all started when i tried to update my bios and had some how screw up my os. I tried startup repair failed system restore failed and safe mode failed also. What should i do now?
View 1 Replies View RelatedA recent hardware or software change might be the cause to fix the problem: 1. Insert Windows installation disc and restart your computer, 2. Choose language settings/NEXT, 3. click repair your computer. If you do not have this disc, contact system admin or computer manufacturer. status OXCOOOOOOf the boot seletion failed "a required device is inaccessible
View 4 Replies View RelatedI went to use the rest room. I come back and he had spilled his juice inside my machine. I lost video and the fan on my brand new 7770 was stuck on max rpm. I turned everything off, took out the gpu, cleaned it, let it dry. Let the rest of the computer dry. I reinstalled the GPU and turned on my machine. The fan was no longer stuck on max RPM, so I felt I dodged a bullet. However, windows failed to start. It continually fails to start. I tried an older GPU (9500 GT). The fan on it would, for some reason, not spin, but I saw the model come up when I started the PC. Windows wont start. Initially I believed my problem was limited to a shorted GPU and I don't mind buying another new one, but since I was unable to get my old GPU to work I'm worried something else has shorted.
View 7 Replies View Related