I have a windows 7 home premium laptop that I am trying to connect to my office PC via VPN. I can make the vpn connection and login to my office PC. I launch into my Outlook but when I exit and try to go to another desktop program I get disconnected everytime from my session. what can I do?
View 3 RepliesI am trying to use the windows remote desktop. I am using It on 2 windows home premium computers. I tired to turn firewalls on both computer off just to check. One of the computers has DSL and know router. When I try to connect I get a certificate. I attach the certificate. I tried just Installing It and than try to connect. What happens Is It just goes back to the windows remote desktop but know connect. I turned remote desktop on.
View 9 Replies View Relatedi have learned via internet that Windows 7 Home Premium computer cant b accessed remotely but it can access computer remotly ( with professional or ultimate versions). Unfortunately i have Home Premium, i have found a Patch " rdp concurrent" which they say can allow Home Premium Versions to be accessed remotly. Is this safe to use this patch? i want remote connection over the internet, how to make a remote connection so that i can login remotely whenever i want?
View 1 Replies View Relatedis it true the only Professional and Ultimate versions of Windows 7 can accept Remote Desktop Connection requests? I read on a post from 2009 that "any version of Windows 7 can act as a Remote Desktop client, but only Ultimate and Profession can host a Remote Desktop."I'm not sure I completely understand that - I do understand what host and client mean. However,d despite lots of different setting changes, I can't connect to this Windows machine using Remote Desktop.
View 1 Replies View RelatedI was trying to connect a friends computer to her office computer thru Remote Desktop and now I see that Windows 7 home premium does not work with that option. Any workaround for using Remote Desktop at home using Windows Home Premium and connecting to an office computer at another location using the same Windows 7 Home Premium? The option is available, but I guess the problem is that the office computer is running the same version that is not supported.
View 3 Replies View RelatedI'm using Win7 Professional at home and winxp at my office. I can connect fine from home to office but can't connect from my office to home. I have gone through all of the google searchs and all of the posts on this forum without any luck. I have checked that my modem has port 3389 forwarded. I have confirmed that it's listening on that port. I have checked all the firewall settings, and even turned off the firewall and still can't connect.
View 6 Replies View RelatedAny way to add Remote Desktop (host) to Windows 7 home?I upgraded to home premium and now found that I can not remote desktop TO this pc Obviously I could upgrade from home to PRO but didn't know if I can just "add" RDP to this home PC at all I realize there are 3rd party software vendors I can use (think I saw VNC, mesh, go2mtg, etc)
View 7 Replies View RelatedI have a desktop and a laptop (both running 7057) in my homegroup. I want to be able to run programs off of the desktop from the laptop. Is there a simple way to do this? I don't need VPN capabilities as I just want to be able to do this from inside the house. I've read through a bunch of threads here but haven't found what I was looking for. I can share files/folders just fine but can't seem to figure out how to share programs.
View 3 Replies View RelatedI am looking to set up a remote desktop connection to my home computer on the home network, how do i go about doing so?
View 6 Replies View RelatedI have a problem with my windows 7 home premium laptop..previously I was able to change my wallpaper but how come it doesn't seem like I can now? For an ordinary person to change the wallpaper they had to right click desktop, select "personalise", then go to "desktop background" and select one. Problem now is that it doesn't do anything when I click a new wallpaper or selct one and click save.
View 5 Replies View RelatedI used to be able to change wallpapers on windows 7 but suddenly I download them but they never show.
View 1 Replies View RelatedI have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
View 1 Replies View Related1) I want to move Win 7 Home Premium from my desktop to my netbook.
2) I want to put Win 7 Professional on my desktop, hopefully without having to start from scratch.
I know if I buy Win 7 Pro, I can do an in-place upgrade on my desktop, but then my CD key for Home Premium may not work when I go to put it on my netbook? What do you think?
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies View Relatedlooking for ideas on how to fix this problem.
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read.
and Vista will not come up to start over.
any Ideas on what to Do?
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
View 9 Replies View RelatedWe have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies View RelatedRecently ive decided that Well i should upgrade this computer. give it a bit of ..well style.But since ive upgraded to Windows 7 there has been no sound whatsoever. Ive downloaded countless driver programs which tell you what sound card you have and not one has detected it. IVE ALSO downloaded drivers for the Windows 7 version of my sound (Realtek AC97) and ran windows updates and NONE worked. ive ran the troubleshooter on the sound thing...STILL not detecting any sound card. i tried changing the audio in BIOS from auto - enabled....nothing.
[code]...
I am just wondering, what's the difference between Windows 7 Home Premium (OEM) and Windows 7 Home Premium?
View 1 Replies View RelatedI bought a notebook preinstalled Windows 7 Home Premium 64 bit, of course, licensed.But I found it incompatible with some software. So I decided to use 32 bit.I want to format the whole drive and install 32 bit version of W7HP.
View 3 Replies View RelatedThe original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I'm french and i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.Anyone know if it it possible to enter a Premium key with a Premium N DVD ?
View 1 Replies View Relatedi already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.
View 1 Replies View RelatedI have sort of a special case here. I purchased my HP laptop in Thailand, and much to my chagrin it came installed with Windows 7 Home Basic. In addition, the HP store which sold me the laptop installed 4gb of RAM neglecting to tell me that the 32bit version of 7 only supported up to 3. At any rate, I am hoping to upgrade to Windows 7 Home Premium, 64 Bit edition.But while there is a glut of information online about how to upgrade from Starter, there is little to nothing about Home Basic. Do I have to buy a full copy of 7 Home Premium 64 Bit? Can I buy an Anytime Upgrade that is meant for Starter and apply it to my computer?
View 7 Replies View Relatedi would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies View RelatedI have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
View 2 Replies View RelatedI have two Windows 7 machines which both flawlessly access my Home Server 2011 via Remote Desktop.When I attempt to access the Hone Server via Live Live Mesh "Connect to this Computer" I receive a log in screen request for a Ctrl-Alt-Del. Clicking the Remote Desktop Window link to issue the request has no affect. No other action is available except to disconnect from the server.
View 1 Replies View RelatedHow can I use the remote desktop with Windows seven x64?
View 2 Replies View RelatedI did a bit of searching, but I seem to be the only person I can find with this issue (most people seem to have the opposite issue).
I want to connect to my servers using Windows 7 Remote Desktop, but I would really like to do so in MORE than 256 colors.
Everyone I see online is asking how to get it to only display in 256 colors. Well mine will only display in 256 mode and I want it in full color if possible.
I checked the display setting in Remote Desktop and it's set to 32bit, but it never actually does show that way.
Edit: I should mention these servers are mostly running Windows Server 2003 if that makes a difference.