When using Remote assistance in windows 7 it shows a list(albeit a small one) of past addresses(ip or computername) that you have logged into. Problem is it is numeric/alphabetic order. Is there a registry setting I can change so it will show me this History in chronological order?
View 4 Replies
I have two pc's: my main one and my HTPC. I cant afford to get my remote yet so i want to setup remote desktop assistant in a way where i can connect when ever i want without worrying about the license.is there anyway to set this up? Both computers are on my network.I don't want to use remote desktop because i don't want it to log the htpc out, since it will be used to watch movies and all.
View 4 Replies View RelatedI had a question concerning the remote desktop assistance on windows 7. I noticed that it was enabled today and I was wondering if windows 7 enables it by default or if someone had to enable it. My friend told me that hackers can get on to your computer through this so I was concerned but wouldn't I have to allow them access to my computer? I was wondering also if downloading things off the internet could have enabled it?
View 4 Replies View Relatedi have a problem on my PC with Remote Assistance.i work in the end user support so i need to use it alote.the problem is that when ever i use the remote assistance my PC totaly disconnects from the internet!
View 8 Replies View RelatedI am trying to use WLM RA to connect to another W7 PC. Occasionally it works OK but usually when I accept the invite WLM disconnects me and brings up a box telling me it will reconnect in X seconds. If I keeping getting the other PC to send invites it might eventually work but it may take 50+ attempts, sometimes I just give up.
View 3 Replies View RelatedI am trying to set it up so I can use remote assistance for a Win7 Home PC and the user not have to know the admin password to allow it. I am trying to look down a teens PC so they have to go to me for installs.
But it seems when I try to do RA they have to know the admin password at the actual computer, is there anyway to make it so RA does not prompt for it?
I just built my sister a win7pro machine and I set it up so she can easily contact me and do remote assistance. I tested my setup with my laptop also running win7pro and mailed the machine off to her (some 2K miles away). Then I decided I'd tried to do a session between my laptop and my main machine a Windows 7 Ultimate (both my laptop and the main desktop are 64bit). The windows 7 ultimate machine will not connect to the windows assistance peer to peer network; my laptop does. I ran the network connection checker from MS (passed all tests); I turned off the FW and tried again, but still no connection. I checked the Upnp setting in the router and it's enabled. I'm beginning to think it may have something to do with my network card itself. The on-board built-in NIC failed a few months back to I installed a Netgear NIC; it been working fine since then with no other strange occurrences. Can anyone think of anything else that might stop a machine from connecting to this network? Does anyone know what are the ports used for Windows remote assistance?
View 5 Replies View RelatedIs there a way to have start->run history kept while not keeping a history of the recently launched programs from the menu?
I know under the properties you have "Store and display recently opened programs in the Start menu", but this is what controls both.
I'm figuring theres probably some registry entry that will let me control them individually.
I had a new system made up for me a few months back and as I was so insistent on excellent cooling - fans - RAM etc, I didn't pay enough attention to the HDD's.Subsequently the system was installed on an SSD 60GB. For a normal user this would be adequate, but I work with a lot of digital programs that write to the app data folders and I can't safely move those onto the D:Drive where I have programs and Docs - all libraries. I have hard linked everything I could, but the more Windows updates and other updates I do, the Winsxs folder is already 7.2GB.I only have 30GB's left after a very short time and would like to be able to install another Windows 7 x64 on a 1TB drive I can free up easily. Ideally, I want to keep the SSD drive as an OS to use for general use and get all my graphics programs onto a different system for work purposes.I have not ever dual booted before and have no idea how to go about it - or I do but it could be wrong.Is it even possible to have one OS on an SSD and the other on a normal HDD? I do have an extra unused OEM version of Win 7 x64 ultimate and hope that is legal to use two identical OS's on same machine - with different keys..If I cannot dual boot I am willing to erase the SSD, probably use the space for something else, and use a normal spinner. It's that important for me to be able to work without disabling everything and have space left over.
View 1 Replies View RelatedI am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies View RelatedI was installing the Verizon Internet Security Suite and I think I have a virus. A tech from Mcafee came on and "helped" by putting my computer into endless Safe mode. When I go to config.sys there is no listing under the boot window. I did a system restore and still nothing.I originally wanted to install this software because I found System Fix on my computer. I followed the instructions from bleepingcomputer.com to remove them.
View 1 Replies View RelatedComboFix was recommended to me in the past, so I disabled avast! and I ran ComboFix as an administrator. Once it was finished, my laptop rebooted and I was presented with the "Preparing Log Report" screen, so I eventually closed ComboFix. Nothing would run until I rebooted and now everything seems to have gone back to the way it was (sluggish performance included.)After some quick research, I came to realize that running ComboFix without assistance is a bad idea. I'd like to make sure I haven't done any damage to my system and, if possible, improve its performance.
My specs are as follows:
Asus G50VT (BestBuy edition)
Windows 7 Ultimate x64
Intel Core2 Duo P7450 (2.13GHz, dual core)
4GB RAM
nVidia GeForce 9800M GS 512MB
Aftermarket Broadcom WiFi adapter (I needed this to run Mac OS X alongside Windows and Ubuntu, but only Windows is installed now.)
Also, due to reheating, I recently removed the heatsinks from the CPU & CPU, cleaned out dust and applied Arctic Silver 5 thermal grease.
I faithfully follow the advice for posting in the blue screen-crash region.
View 8 Replies View RelatedI just got my M14x back from the dell repair center and I just booted it up and did the first time setup and all (OS was formatted) and I noticed that AlienFX and all Alienware applications are missing infact.
View 1 Replies View RelatedI am trying to connect to the Internet through my computer, however I cannot display any web pages.I have full connection to wifi, but it states this is "local only". When I diagnose the problem, I am told the domain server name is unavailble. I have tried to update this manually, but this has not worked. (I am also unable to "ping" information to any location in dos).I am running windows vista and ie8. I quest mcafee antivirus.
View 2 Replies View RelatedI know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
For some reason I have lost the listing in my start menu under the heading "programs." I click on programs to find a program and all I get is the word "back" in the field with no programs listed in the above location. I had been able to do so in the past. What has happen?
View 1 Replies View RelatedWe have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies View RelatedI just did a fresh install of windows 7 64bit and have a dual wintv t500 digital tuner card installed.Wmc is working fine apart from not displaying the channel listings (epg) The names of the channels are there but It just says "no data available" on every channel listing..Yet when i r click on the more info button, all the program guides/listings show up in that section But when i go back to the main guide screen there missing.
View 4 Replies View RelatedThe Domain Name Server (DNS) does not have a listing?
View 2 Replies View RelatedIf I search in "c:users" for *.xls I get 2 files listed - both are in deep subfolders.142.xls in "c:userspaulappdataoaming emp emp emp emp emp emp emp" If I search in "c:userspaul" for *.xls I get 100+ files listed, eg:list.xls in "c:userspaulackupICT2010" Which leads me to think that the search is not working correctly - a file found in "c:userspaulackupICT2010" must also be in "c:users".Or am I missing something?
View 1 Replies View RelatedHave copied a Folder from another PC that has a program in it to the Desktop of a new PC running Windows 7. Program happens to be Cliptrak, but that's probably not too important as this is more of a general question.
Now that I have the Program Folder on the Desktop, how do I get it in the All Programs listing ?
I tried dragging it to the Start Button, and I also tried opening Computer and dragging it to the C: drive icon shown there. No luck either way. What is the proper procedure for doing this?
I recently took advantage of the 30-day trial for Time Warner Mobile and installed their USB device and software. (They use the same WiMax network as Sprint and Clearwire.) After deciding I didn't want it, I uninstalled the software. However, when you click on the network icon in the bottom right hand corner that lists the wireless networks in the area you can access, it still has "Time Warner Mobile 3G" listed at the very top under Dial-up and VPNs. Can anyone tell me how I can get rid of that listing since I no longer have the device or the software?.
View 4 Replies View RelatedI just reformatted my HD and installed Windows 7-64 Ultimate again. Since I have been using Windows 7, I know most of the tweaks, but don�t recall how I fixed this one. When in Windows Explorer, under Computer, I see all of my hard drives, but also see a drive for System Reserved. What tweak do I need so that I don�t see the system reserved?
View 7 Replies View RelatedI have a C: drive and an E: drive on a Windows 7 X64 Media Center PC. Both have a directory called "Movies" ... when I start Windows Media Center and go to "Videos" I have a C:Movies AND an E:Movies.
Is it possible to merge both these directories into a single directory in Windows Media Center?
The C drive is 95% full so I can't copy the movies from the E: drive onto C: and the E: drive is 95% empty... so over time I'll add more movies to my collection (on the E: drive) and would really like to have ALL the movies from both C:Movies and E:Movie listed in a single directory and arranged alphabetically....
Ps. I've already tried adding both directories to the windows library 'Movies' directory but you can't access the 'Movie' library from within the Media Center!
How do you list/view hidden files in a DIR using command line. (Got it wrong on a test today) couldnt find it im my A+ book on which switch to use. I put /h but apparently that was wrong
View 7 Replies View RelatedI have a Acer laptop, Aspire 5742-7342. Can anyone give me a listing of what each function key do?
View 1 Replies View RelatedWhen listing the installed programs there is a column called 'location'. How and where does this come from in the installation program? In other words in Visual Studio 2008 where does one put this entry for the installation to cause it to show up?
View 1 Replies View Relatedwindows media center 7 64 has stopped listing mpeg4 files. How can i fix this?I did install nero 9 and then uninstalled it. and i installed power2go8 could these programs messup wmc?
View 1 Replies View RelatedI have bought a cd which I wish to add to my cd collection on my pc. I insert the cd and winsows media player will find it and download all the cd information and list it ok. It then starts the ripping process by listing all the tracks as pending, but will not rip anything. You can hear the cd head tracking but nothing else. The same happens in itunes.I have another pc with XP as the OS and the cd will rip ok on that version of media player
View 5 Replies View RelatedI bought my new computer about 3-4 months ago but the other day it decided to stop saving web history. It will show some pages but not all. If it does save, it will save the initial page but nothing after that. Normally when opening a website, a bar will appear above the taskbar at the bottom of the screen that says 'Website found, Waiting for reply...' on the left hand side and 100% on the right, etc., that bar is no longer appearing. I've check the internet options part and the 'delete browsing history on exit' is unchecked. Disk space is set at 250 and days at 20. I'm running windows 7, IE 9.
View 3 Replies View Related
