For some reason I have lost the listing in my start menu under the heading "programs." I click on programs to find a program and all I get is the word "back" in the field with no programs listed in the above location. I had been able to do so in the past. What has happen?
View 1 RepliesHave copied a Folder from another PC that has a program in it to the Desktop of a new PC running Windows 7. Program happens to be Cliptrak, but that's probably not too important as this is more of a general question.
Now that I have the Program Folder on the Desktop, how do I get it in the All Programs listing ?
I tried dragging it to the Start Button, and I also tried opening Computer and dragging it to the C: drive icon shown there. No luck either way. What is the proper procedure for doing this?
I am trying to connect to the Internet through my computer, however I cannot display any web pages.I have full connection to wifi, but it states this is "local only". When I diagnose the problem, I am told the domain server name is unavailble. I have tried to update this manually, but this has not worked. (I am also unable to "ping" information to any location in dos).I am running windows vista and ie8. I quest mcafee antivirus.
View 2 Replies View RelatedI just did a fresh install of windows 7 64bit and have a dual wintv t500 digital tuner card installed.Wmc is working fine apart from not displaying the channel listings (epg) The names of the channels are there but It just says "no data available" on every channel listing..Yet when i r click on the more info button, all the program guides/listings show up in that section But when i go back to the main guide screen there missing.
View 4 Replies View RelatedThe Domain Name Server (DNS) does not have a listing?
View 2 Replies View RelatedIf I search in "c:users" for *.xls I get 2 files listed - both are in deep subfolders.142.xls in "c:userspaulappdataoaming emp emp emp emp emp emp emp" If I search in "c:userspaul" for *.xls I get 100+ files listed, eg:list.xls in "c:userspaulackupICT2010" Which leads me to think that the search is not working correctly - a file found in "c:userspaulackupICT2010" must also be in "c:users".Or am I missing something?
View 1 Replies View RelatedI was installing the Verizon Internet Security Suite and I think I have a virus. A tech from Mcafee came on and "helped" by putting my computer into endless Safe mode. When I go to config.sys there is no listing under the boot window. I did a system restore and still nothing.I originally wanted to install this software because I found System Fix on my computer. I followed the instructions from bleepingcomputer.com to remove them.
View 1 Replies View RelatedI recently took advantage of the 30-day trial for Time Warner Mobile and installed their USB device and software. (They use the same WiMax network as Sprint and Clearwire.) After deciding I didn't want it, I uninstalled the software. However, when you click on the network icon in the bottom right hand corner that lists the wireless networks in the area you can access, it still has "Time Warner Mobile 3G" listed at the very top under Dial-up and VPNs. Can anyone tell me how I can get rid of that listing since I no longer have the device or the software?.
View 4 Replies View RelatedI just reformatted my HD and installed Windows 7-64 Ultimate again. Since I have been using Windows 7, I know most of the tweaks, but don�t recall how I fixed this one. When in Windows Explorer, under Computer, I see all of my hard drives, but also see a drive for System Reserved. What tweak do I need so that I don�t see the system reserved?
View 7 Replies View RelatedI have a C: drive and an E: drive on a Windows 7 X64 Media Center PC. Both have a directory called "Movies" ... when I start Windows Media Center and go to "Videos" I have a C:Movies AND an E:Movies.
Is it possible to merge both these directories into a single directory in Windows Media Center?
The C drive is 95% full so I can't copy the movies from the E: drive onto C: and the E: drive is 95% empty... so over time I'll add more movies to my collection (on the E: drive) and would really like to have ALL the movies from both C:Movies and E:Movie listed in a single directory and arranged alphabetically....
Ps. I've already tried adding both directories to the windows library 'Movies' directory but you can't access the 'Movie' library from within the Media Center!
When using Remote assistance in windows 7 it shows a list(albeit a small one) of past addresses(ip or computername) that you have logged into. Problem is it is numeric/alphabetic order. Is there a registry setting I can change so it will show me this History in chronological order?
View 4 Replies View RelatedHow do you list/view hidden files in a DIR using command line. (Got it wrong on a test today) couldnt find it im my A+ book on which switch to use. I put /h but apparently that was wrong
View 7 Replies View RelatedI have a Acer laptop, Aspire 5742-7342. Can anyone give me a listing of what each function key do?
View 1 Replies View RelatedWhen listing the installed programs there is a column called 'location'. How and where does this come from in the installation program? In other words in Visual Studio 2008 where does one put this entry for the installation to cause it to show up?
View 1 Replies View Relatedwindows media center 7 64 has stopped listing mpeg4 files. How can i fix this?I did install nero 9 and then uninstalled it. and i installed power2go8 could these programs messup wmc?
View 1 Replies View RelatedI have bought a cd which I wish to add to my cd collection on my pc. I insert the cd and winsows media player will find it and download all the cd information and list it ok. It then starts the ripping process by listing all the tracks as pending, but will not rip anything. You can hear the cd head tracking but nothing else. The same happens in itunes.I have another pc with XP as the OS and the cd will rip ok on that version of media player
View 5 Replies View RelatedThe "Uninstall/change a program" utility in the control panel is not listing all my programs (it does list about 90% of them though). What else can I use?
View 5 Replies View RelatedI frequently use a folder name "Other" to group files that don't fit in any other folder. The problem here is that this folder falls somewhere in the middle of the rest of the folders when I sort alphabetically (which isn't very pretty). Would it be possible to get this folder after the rest of the folders?
Presumably, I'd to have to find a character that comes after "z". Whatever ordering Windows uses, it isn't the Ascii table that many people refer to.
There does not appear to be a way to change the view to show the "To" field instead of the "From" field in the mail list that is displayed (in the center column)when the "All Sent Items" folder is selected in Windows Live Mail 2011. This makes it very difficult to find particular sent e-mails when searching. Does anybody have a fix, or is this an unaddressed glitch in WLM2011?
View 1 Replies View RelatedIm looking for a portable program which includes a Browser and a Mailing program, like Opera is, but NOT Opera (must be able to run beside Opera & Firefox!!)
View 5 Replies View RelatedI installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
View 6 Replies View Related64bit application is getting installed in program files (*86). How to change the destination folder. Insta shield is not giving this option.
View 3 Replies View Relatedhow can i write a program in c that shuts down a computer in 20 seconds
View 6 Replies View RelatedI don't know where this error hs_err_pid came from.I closed down explorer and there were all this notepad messages on my desktop and I can't get rid of them. Researching, I know this is a Java thing. I've uninstalled and reinstalled several times to no avail.My windows update is fully updated.I've run 3 virus programs.I notice this was addressed for someone using XP but what of Windows 7? My add/remove program file only contines the program Java (TM) update 29. Nothing else is listed as far as Java is concerned.I've run cleaner programs and these did not take care of the problem. Every time I restart my machine these errors immediate pop up at start up.
View 1 Replies View RelatedIm trying to run a program on Windows 7. The program is a logitech installer. But Windows 7 Program Compatibility Assistant blocks the program and prevent me from running it. I have tried disable the Program Compatibility Assistant service in the service manager and i have also enabled the "Turn off Program Compatibility Assistant" group policy.But windows still keep blocking the program.
View 9 Replies View RelatedI have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else.
CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.
I have an issue with my ArcSoft TV program. Recently something changed and now I get the UAC pop up asking if I want this program to make changes to my computer.Issue is this, I can set to record a program, but with the pop up now coming up, I have to be avaliable to click to record the progarm.Currently I have the UAC set not to ask (pop up). However I understand the reason for the UAC asking and I prefer it to ask. So what I need is a way to allow ArcSoft to run without the pop up, but all other programs to ask for security. What is the way to do this for this one program?
View 1 Replies View RelatedI have W7 IE and have downloaded a word processing program (AbiWord) which I want to add to list of Default Programs. how to get this program added to the default list?
View 10 Replies View RelatedI would like to add "PDF Viewer Plus", by Nuance, to the list of Default Programs so I may associate it with my PDF files.
View 2 Replies View RelatedRunning Windows 7 Pro, 64bit.We have a package of scripts and programs that comprise a custom application for OpenOffice 3.2 (do not want to upgrade OO at this point). We must support our package on Win XP, Vista and 7.A bunch of our scripts start up OpenOffice by running the command: C:Program FilesOpenOffice.org 3programsoffice.exe (with arguments).Works fine on XP. Fails on Windows 7 because the OO program installs itself into Program Files (x86). Even if I change properties of the installer file, in the Compatibility tab, to Win XP SP3, AND tell the installer to put it in C:Program Files, Windows 7 still installs it into Program Files (x86). We would LIKE to have the same script work on both flavors of Windows. I know we can modify our scripts to branch on which Windows, and choose two different paths to soffice.exe, but that's messy.I can't solve it by creating a shortcut in Program Files, to the program in Program Files (x86); that's not allowed.Is there some solution in Windows 7 to find the program no matter which place it lives? Like, a semi-intelligent environment variable for ProgramFiles that looks in one place, then the other?
Ie.: "C:\%ProgramFiles%OpenOffice.org 3programsoffice.exe
I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
View 7 Replies View Related