I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
I have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
Half a year ago my laptop's hard disk's clusters began to fail, so I finally had to change it with a Western Digital Scorpio Black 750 GB - 7200rpm (WD7500BPKT). When reinstalling Windows 7 Home Premium x64, I decided to dedicate the C:\ unit to the OS "only", and E:\ to programs and files of all sorts.
I've then installed all of my programs by sending them to their respective folders, E:\Program Files and E:\Program Files (x86) . But I'm now noticing all of them are running in x32 mode! The only programs running in x64 are those forcedly installed into the C:\Program Files folder (which my Italian OS calls C:\Programmi, although program installers install into C:\Program Files).
Is it that Windows isn't recognizing any Program Files folders but the default ones in C:\?
I'm trying to cut back on programs installed to my SSD boot drive.However, almost everything is installed there. Even if I download and install from my HHD storage drive.(Google Chrome, Picasa, Java, Steam etc.). WIN 7 OS - Corsair 115GB SSD - WD 1TB HDD Storage.
I was wondering this because i have an ssd for my boot, and a hdd for my storage. i am installing borderlands 2 on the hdd and i need to get to the program files. are they on the one on the c drive or where else? I am wondering because last time i looked i didnt see them there
I have just purchased an HP with Windows 7 and am trying to install Outlook 2000 but have a problem --Outlook installs OK but does not show up on the Program files so I can make it my default email program. I have removed Windows Mail. Also having problem in creating a personal folder. I receive two messages,
1. Outlook can not open the folder that has the files for opening, sending or receiving email. 2. Outlook can not find the personal folder to send information to.
Running Windows 7 Pro, 64bit.We have a package of scripts and programs that comprise a custom application for OpenOffice 3.2 (do not want to upgrade OO at this point). We must support our package on Win XP, Vista and 7.A bunch of our scripts start up OpenOffice by running the command: C:Program FilesOpenOffice.org 3programsoffice.exe (with arguments).Works fine on XP. Fails on Windows 7 because the OO program installs itself into Program Files (x86). Even if I change properties of the installer file, in the Compatibility tab, to Win XP SP3, AND tell the installer to put it in C:Program Files, Windows 7 still installs it into Program Files (x86). We would LIKE to have the same script work on both flavors of Windows. I know we can modify our scripts to branch on which Windows, and choose two different paths to soffice.exe, but that's messy.I can't solve it by creating a shortcut in Program Files, to the program in Program Files (x86); that's not allowed.Is there some solution in Windows 7 to find the program no matter which place it lives? Like, a semi-intelligent environment variable for ProgramFiles that looks in one place, then the other?
i was recently running windows 7 64 bit on my computer and just decided to switch to 32 bit 7. however i still have 2 program files. when i try to delete program files (x86) it tells me i need trusted installer permission. anyone have any ideas how i can delete the other program files?
I am about to install Windows 7 (64bit) on my new 60GB SSD drive. I will keep a separate 1TB drive for all music, etc. and I intend to install most applications on the 1TB drive as well.However, since 64-bit windows by default has both a "Program Files" and "Program Files (x86)" folder for 32-bit apps I wonder if I could get in trouble by not installing 32-bit apps in the x86 folder?
Trying to understand why windows 7 has program files and (x86) program files. Using windows premium 64 bit.Sometimes programs get installed to program files and sometimes they go to (x86) program files what is the difference?
I have recently installed Win 7 Ultimate 64 bit OS. I have noticed it created two folders one "program files" and one "program files (x86). From what I have read so far the x86 folder is for 32 bit apps and the other for 64 bit apps. My question is:
I only want my OS and any critical apps on my SSD C drive so I created an E drive that I put all other apps on. On the E drive I have created only one folder "program files" and have been putting all other apps in it.
Everything appears to be working OK but should I have also created a folder x86 on the E drive and install all 32 bit apps in it or does the OS just know what to do regardless of the folder it is in?
i was trying to uninstall nokia pc suite but the process dd not finish and now everytime am trying to install the pc suite again am receiving this error 'another program is being installed. Please wait until that installation is complete, and then try installing this software again.
There are a few occasions I really would have use for a program that could move an already installed piece of software to another location. For this instance i'm going to use starcraft 2 that i now would like to move over to an SSD hard drive since there's a lot of loading in-game i would like to speed up.Must i uninstall, move over game folder, then reinstall the game on the SSD?
I have a Windows program that is installed in the default C:Program Files (x86) folder, and of course it cannot write some of the data it needs to write to that folder. I assume that is because of the Windows 7 permissions. Is there a simple way to allow this particular program to write to its install folder despite permission restrictions? I already moved its data folder to my data partition but this is for some files that I do not have the option to move to another folder.
I recently formatted my computer and today i went to razer's website to download the drivers for my razer deathadder. During installation a driver came up asking my permission to install it says G-Spy. I clicked yes... =/ because i became accustomed to clicking yes to everything ugh! I cant seem to find any drivers that were . Is there anyway i could search it up somehow?
My all installed program are not in control panel, I have recently installed one program, it is been installed properly but has not appeared in control panel, I want to uninstall it.
I recently installed and uninstalled a program. However, the entry for the program still remains in the Installed Programs list in the Control Panel. I have examined the Registry keys under uninstall and I cannot find this program listed there to be manually deleted. How do I remove this entry?
Windows 7 64bit hp. Some exe files ask during installation, in which folder the program should be installed, some don't. If not asked during installation, how can I decide in which folder the program must be installed anyway?
I've got Virtual PC/Windows XP installed and working, but when I install a program in Windows XP mode and create a shortcut in the "All Users" folder I don't see it in the Windows 7 start menu, as a matter of fact I don't even have the "Virtual Windows XP Applications" folder in the Win 7 start menu.
Windows 7 64bit hp.Info: Some exe files ask during installation, in which folder the program should be installed, some don't.how can I decide in which folder the program must be installed anyway?
Suddenly everything on system partition is unavailable..nothing works, or appears in start meny, even calculator, default games....or any program installed. Windows 7 won't uninstall programs or install, it says that program is already installed...but I can't run.
I am currently having problems getting Malwarebytes AntiMalware to function as I want it to and so a possible fix was to uninstall and reinstall. I did this and know CCleaner shows an InnoSetup program that also installed itself as autostart. I've found it is some old type of program installer, but I've never had it, and don't want it.
When you install a program from within Administrator account should it automatically be available from within the User account as well?I installed a program from within the Administrator account but when I go the the User account it is no where to be found.
My installs of Windows 7 was working fine and all of a sudden it wont boot anymore. Yesterday I put in a required Java Program update install and I think Windows just added a couple of critical updates as well. I have tried booting in every way possible, rolling back, safe mode, etc, and nothing works.
I keep getting the screen telling me there is a problem and must do a system repair. Then the repairs and all it wants to do is shut down. I managed to pull up some error reports and it seems two files are corrupt which are TCPIP.SYS and one called FWPKCLNT.SYS.
TCPIP.SYS is located in C:/WIndows/System32/Drivers FWPKCLNT.SYS seems to be in drive F:/ which is not an actual drive. It must be a temporary boot drive created by Windows 7.
I have an older XP on another partition on the same hard drive so I booted in XP to see if I could possibly delete the reported corrupt TCPIP.SYS file and replace it from another Windows 7 install from my laptop just to see if that might work. But it wont let me delete the TCPIP.SYS file. It says it is in use, but I can't understand that since I am trying to delete it from the Windows 7 partition while I am booted up from the XP boot partition.
I want my system to automatically create a restore point before installing any program/software in it? How can set this up on my windows 7 64 bit laptop?