I have a Windows program that is installed in the default C:Program Files (x86) folder, and of course it cannot write some of the data it needs to write to that folder. I assume that is because of the Windows 7 permissions. Is there a simple way to allow this particular program to write to its install folder despite permission restrictions? I already moved its data folder to my data partition but this is for some files that I do not have the option to move to another folder.
I recently reformatted my hard disk and re-installed Windows 7, and when I try to edit any files in the subdirectories off any on the directories in the C:Program Files directory, I get 'protected' errors. I found that I could not create files or edit files anywhere below these directories.It turns out that everything in the Program Files folder and below is write protected. I tried changing one of the subfolder's properties and marked everything as Not Read-only, but I still couldn't create/edit files there.I was running Windows 7 before the hard disk crapped out, and I was able to modify the au3.propertied file with no problem.I know that Microsoft wants to put all data files in the C:User... directories, but the program I'm trying to change is AutoIt (SciTE), and I don't think here's a way to change the location of the properties files.I Googled in the Windows 7 support site and found a link to a video telling how to work around this. You have to change permissions of the parent folder and all files/folders below it.
I am trying to write to this folder as I need to replace 2 drivers with more updated versions. I am running as Admin and I have the UAC set to Never Notify. I right click on the folder and uncheck read only. Then I go to the Security tab and attempt to edit the permissions. However even as Admin the buttons to add and edit permissions are "Ghosted Out
I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
I have my 2 PC's networked in a Homegroup. 1 is running Win 7 Home Premium 64, the other Win 7 Ultimate 32. I want to write to the Program Files folder on the 32 bit system from the Program Files (x86) folder on the 64 bit system. All other read/write operations between these 2 systems are succeeding. I have set up full permissions on both Program Files folders exactly as with other folders: Properties > Sharing > Advanced Sharing > Share this folder > Permissions > Full Control for "Everyone". I suspect UAC may be intervening. Is there any way to defeat this? My final objective is to automate synchronization between a few selected areas in these Program Files using my backup utility, SyncBackSE. It kept failing based on access denied, so I tried to drag & drop manually via windows explorer, and this is also not allowed. don't focus on questions about SyncBackSE - I am seeking help getting permission to move & change files via explorer.
I have been given a project to test Windows 7 Pro in my work environment and our Desktop administration team has simply given me a stripped down version of Win 7 Pro, with little modifications. I got an error message when trying to install our e-mail client, and noticed it is not allowing me to write to the c:windows folder. I checked the permissions for it, and literally, No account has full control or even write permissions to this folder- not even the local administrator account. I have been unable to add permissions to the folder, because there is no account that has them...The local administrators have full control of C: and I attempted to force child objects of c: to inherit permissions from C:, but it did not work.
I have a seagate 1 terabyte external hard drive and I made an image of my old hard drive which contained windows XP Professional.I've since migrated to Windows 7 and am now trying to access the data in the my documents folder in the "imaged" drive which is embedded in in the external hard drive. I am trying to access the data in the administrators folder, but cannot: ACCESS DENIED.I tried to change ownership within windows 7.... Cannot: MEDIA IS WRITE PROTECTED.How can I access these files? I can access all the other files that are on the "image" which is on the external hard drive.
Im not sure if anyone else has had this problem or noticed it, but I have enabled the GPO prevent users from adding files to the root of thier users files folder on our network as we use folder re-directs to my documents which in theory should keep everything tidy. This works up until a point, if I try and browse to the location and create a file I cant. If I try and drag a file into that location I cant, but as soon as I try to save as it lets me
i was trying to uninstall nokia pc suite but the process dd not finish and now everytime am trying to install the pc suite again am receiving this error 'another program is being installed. Please wait until that installation is complete, and then try installing this software again.
There are a few occasions I really would have use for a program that could move an already installed piece of software to another location. For this instance i'm going to use starcraft 2 that i now would like to move over to an SSD hard drive since there's a lot of loading in-game i would like to speed up.Must i uninstall, move over game folder, then reinstall the game on the SSD?
I recently formatted my computer and today i went to razer's website to download the drivers for my razer deathadder. During installation a driver came up asking my permission to install it says G-Spy. I clicked yes... =/ because i became accustomed to clicking yes to everything ugh! I cant seem to find any drivers that were . Is there anyway i could search it up somehow?
My all installed program are not in control panel, I have recently installed one program, it is been installed properly but has not appeared in control panel, I want to uninstall it.
I recently installed and uninstalled a program. However, the entry for the program still remains in the Installed Programs list in the Control Panel. I have examined the Registry keys under uninstall and I cannot find this program listed there to be manually deleted. How do I remove this entry?
Windows 7 64bit hp. Some exe files ask during installation, in which folder the program should be installed, some don't. If not asked during installation, how can I decide in which folder the program must be installed anyway?
Half a year ago my laptop's hard disk's clusters began to fail, so I finally had to change it with a Western Digital Scorpio Black 750 GB - 7200rpm (WD7500BPKT). When reinstalling Windows 7 Home Premium x64, I decided to dedicate the C:\ unit to the OS "only", and E:\ to programs and files of all sorts.
I've then installed all of my programs by sending them to their respective folders, E:\Program Files and E:\Program Files (x86) . But I'm now noticing all of them are running in x32 mode! The only programs running in x64 are those forcedly installed into the C:\Program Files folder (which my Italian OS calls C:\Programmi, although program installers install into C:\Program Files).
Is it that Windows isn't recognizing any Program Files folders but the default ones in C:\?
I've got Virtual PC/Windows XP installed and working, but when I install a program in Windows XP mode and create a shortcut in the "All Users" folder I don't see it in the Windows 7 start menu, as a matter of fact I don't even have the "Virtual Windows XP Applications" folder in the Win 7 start menu.
I'm trying to cut back on programs installed to my SSD boot drive.However, almost everything is installed there. Even if I download and install from my HHD storage drive.(Google Chrome, Picasa, Java, Steam etc.). WIN 7 OS - Corsair 115GB SSD - WD 1TB HDD Storage.
Windows 7 64bit hp.Info: Some exe files ask during installation, in which folder the program should be installed, some don't.how can I decide in which folder the program must be installed anyway?
Suddenly everything on system partition is unavailable..nothing works, or appears in start meny, even calculator, default games....or any program installed. Windows 7 won't uninstall programs or install, it says that program is already installed...but I can't run.
I have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
I am currently having problems getting Malwarebytes AntiMalware to function as I want it to and so a possible fix was to uninstall and reinstall. I did this and know CCleaner shows an InnoSetup program that also installed itself as autostart. I've found it is some old type of program installer, but I've never had it, and don't want it.
When you install a program from within Administrator account should it automatically be available from within the User account as well?I installed a program from within the Administrator account but when I go the the User account it is no where to be found.
