I have a C: drive and an E: drive on a Windows 7 X64 Media Center PC. Both have a directory called "Movies" ... when I start Windows Media Center and go to "Videos" I have a C:Movies AND an E:Movies.
Is it possible to merge both these directories into a single directory in Windows Media Center?
The C drive is 95% full so I can't copy the movies from the E: drive onto C: and the E: drive is 95% empty... so over time I'll add more movies to my collection (on the E: drive) and would really like to have ALL the movies from both C:Movies and E:Movie listed in a single directory and arranged alphabetically....
Ps. I've already tried adding both directories to the windows library 'Movies' directory but you can't access the 'Movie' library from within the Media Center!
I just rebuilt my desktop and installed Windows 7. I had thought to put My Pictures and My Music on separate Hard Drives from the Operating System and everything else; OR would performance be better with all on one hard drive and backing up the My Music and My Pictures to separate Hard Drives? I'm using i7 processor with 8G RAM and 500GB hard drives (3); with a 1 Tetrabit External MyBook.
Is it possible to merge C and D drives without deleting the data or having to format them. If it's possible, then how to do this in Windows 7? Notice both drives are almost full of data (not many games or programs).
I just reformatted my HD and installed Windows 7-64 Ultimate again. Since I have been using Windows 7, I know most of the tweaks, but don�t recall how I fixed this one. When in Windows Explorer, under Computer, I see all of my hard drives, but also see a drive for System Reserved. What tweak do I need so that I don�t see the system reserved?
My father replaced his Windows 98 machine with a new computer running Windows 7.He's currently on 32-bit ultimate, but we could change versions if needed.He's really hoping there's some way to force Windows 7 into a single user mode, primarily so C:usersAll Users, Default User, Public, and his own user are merged into one. It's absolutely driving him nuts the way it is.
I would like to know the procedure to connect to multiple Access points with my laptop.For example, my laptop is connected to office WIFI for file sharing. Now, I would also like to connect to another AP for internet connectivity. If i currently do that, it disconnects from the previous network. how can i Simultaneous connect to multiple APs?
1 Wifi virtual miniport adapter by microsoft
2 this link, Microsoft Research Virtual WiFi - Microsoft Research However, I am not able to figure out how to use or configure these things.
How can I have my mail boxes to be open on a single PC? On my iPhone, I can check my 5 email addresses without signing in and signing out. It is a pain to have 3 different hotmail addresses while signing in and signing out.
I recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
How to extend dvi output to multiple hdmi monitors? Have Samsung Series 7 Slate tablet computer running Windows 7 Ultimate 64-bit. Nature of computer prevents swapping out graphics card/module.
I need to 'extract' .wma files from within many different folders to a single, main folder. It looks like this: Main Folder>Artist>Album>Track (.wma) but there are many artists. I want to get all the tracks from within the two subfolders into a single folder.
I always thought that RAID 0 configuration is possible using two identical physical drives. I bought this Sony Laptop. If you go down to the Hard Drive Storage section you see you can customize it with four different options. I chose the 1st one (750GB mechanical drive). However you can see that the last two options involve RAID 0 (128x2 or 256x2). I was wondering where to install the 2nd drive as there is only a single drive compartment with a single SATA ribbon connector when you remove the back cover. I called Sony Tech Support and this is what they said: "You can only physically install a single SSD. The RAID 0 options involve a single physical SSD that inside has two chipsets in RAID 0, in other words, it's a single physical SSD that acts as two drives". Of course I never heard of this, does this exist?
I have a 10 files that have all been categorised into about 40 folders. These files have been damaged.I have a backup of all these files, but they are not categorised and sit in a single directory.Does anyone know of an easy technique to batch replace the damaged files with the originals?
I have 3 Hdds in my PC. On 2 i have installed WinXP, and they are installed separately, so i can boot without the other drive present. My motherboard has a boot manager so i can choose the boot drive.
Now i installed Windows 7 on the third drive, when the other 2 were disconnected.
It works fine by itself, but when i connect the other 2 drives, and choose the drive to boot from, the Windows 7 one says it has no OS installed. Other XPs boot correctly.
i want to have my normal backup, which is a backup of the user files on the d drive to my backup drive (drive X), now i also want to add another backup schedule, so i can backup my pictures specifically to a 4th hard drive, in this case drive drive H.
how would i add this 2nd backup on windows? is this possible? should i be looking for task manager? so far i have tried but cant find any options as access through Action Center Backup.
I'm gonna be moving from a 32-bit XP OS to the Windows 7 64-bit version. Before installing the OS, I'm gonna unplug my 2nd Hard drive where there's no OS installed, just storage.
Will I have to do anything special on the 2nd HD when I replug it in Windows 7? No reformatting is needed right? Because I backed up my files on that HD.
I use a backup software called Macrium Reflect and they have an option for splitting your backup archive. I have a split archive that I have stored over multiple hard drives (because it is a very large file), but I cannot open the archive unless the archives are all in one folder. Is there some way to make a "virtual directory" or network drive so that I can use these files as if they are in the same folder, even though they are on different drives?
I've made the move (fresh install on new HDD) from XP to Win7RC x64 (I never gave Vista a look) and I want to scan my old HDD partitions for *.xls;*.doc;*.dwg;*.jpg etc to make sure I haven't missed any old files which were not saved in the right place.
The two partitions are mounted as F: and G:
In XP once you'd turned off the animated dog and chosen the advanced option, you could set "all of part of the filename" to "*.xls;*.doc;*.dwg;*.jpg" and "look in" to "f:;g:". It was a so easy
I can't seem to get Windows 7 to search for more than one file extension, let alone multiple drives as well. Is there an advanced search option which I've missed?
I want to save a file to multiple drives, simultaneously. RAID can join multiple drives, as far as I know, you can't have a temporary RAID setup, whereas, you have an external drive that is attached temporarily, how ever long temporarily is, save the file which is saved to the RAID, when you don't want the drive to be attached to a RAID you can stop the RAID, whenever, and it acts like a regular drive.
I installed my Windows 7 OS on a 200GB HDD. Recently, I installed a 500GB HDD in my PC. I used to be able to stream media files to my Xbox 360 with no problem with the media files being on the 200GB HDD. However, I've transferred all my Media Files to my 500 GB (secondary) HDD. The Windows Media Centre on the Xbox 360 isn't giving me any sort of option to stream files from the 500 GB HDD. So, what exactly do I do?
I have discovered an issue with Windows 7 that has become quite annoying. I have tested it with many scenarios and the issue continues to exist.
If you try to delete a file off an additional hard drive (meaning not the primary drive) the system will delete it permanently. It will not ask you to move it to the Recycle Bin, it will just ask if you want to permanently delete the file. Any file on the drive will move to the Recycle Bin with no problem.
Also, files within archives (zip files) will permanently delete even if the archive is on the primary drive.
I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
ack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
On my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.
The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)
i'm working with a new pc build that uses a 60 gb ssd for its boot drive, and which is also reusing some "old" sata hdds for storage.
at the time i installed windows 7 ult 64, i had only a new ssd plugged in, and the bios was set to ahci mode. the installation went fine and i was able to boot into windows afterwards without issue.
then, i connected a wd caviar black sata hdd to use as storage, with the ssd being the boot drive. with both of them connected, windows will not get past the starting windows screen.
i made this video of the program before i understood that it was a drive controller issue: startup problem - Internet in it, you can see that windows boots fine in ahci mode with just the ssd plugged in, but that when the backup sata drive is also connected it doesn't get past the starting windows screen.
for the record, this caviar black hdd was my previous boot os, and it also has a windows 7 install on it (which i've renamed the base folder of), but it is not booting from that hdd. also, i have tried the same thing with other "old" sata hdds that do not have any previous windows install on them, and the result is the same thing which is shown in the video.
I am in the process of putting (5) 3TB HDD's into my computer (Windows 7 Home Premium 64 bit) to rip my Blu-ray collection to for playback in my home theater room via a Popcorn Hour player. Each drive is independent and I will be systematically filling one drive before going onto the next.The problem is that the Popcorn Hour players communicate with the PC by specifying one folder via SMB that contains all of my media. Since I am doing independent drives, there will be one master folder on each drive containing all of the media for that said drive. Meaning, in terms of the Popcorn Hour/SMB setup, there are five folders I need it to *see* and catalog.
Okay, so I just restored windows seven and the system saved all of my old files into a folder entitled windows.old.000Inside that folder there are the folders of PerfLogs, Program Files, Program Files (x86), Program Data, Users, WindowsI would like to merge those together, how would I go about doing that?
