I installed my Windows 7 OS on a 200GB HDD. Recently, I installed a 500GB HDD in my PC. I used to be able to stream media files to my Xbox 360 with no problem with the media files being on the 200GB HDD. However, I've transferred all my Media Files to my 500 GB (secondary) HDD. The Windows Media Centre on the Xbox 360 isn't giving me any sort of option to stream files from the 500 GB HDD. So, what exactly do I do?
View 9 Replies
I'm gonna be moving from a 32-bit XP OS to the Windows 7 64-bit version. Before installing the OS, I'm gonna unplug my 2nd Hard drive where there's no OS installed, just storage.
Will I have to do anything special on the 2nd HD when I replug it in Windows 7? No reformatting is needed right? Because I backed up my files on that HD.
I just rebuilt my desktop and installed Windows 7. I had thought to put My Pictures and My Music on separate Hard Drives from the Operating System and everything else; OR would performance be better with all on one hard drive and backing up the My Music and My Pictures to separate Hard Drives? I'm using i7 processor with 8G RAM and 500GB hard drives (3); with a 1 Tetrabit External MyBook.
View 3 Replies View RelatedI use a backup software called Macrium Reflect and they have an option for splitting your backup archive. I have a split archive that I have stored over multiple hard drives (because it is a very large file), but I cannot open the archive unless the archives are all in one folder. Is there some way to make a "virtual directory" or network drive so that I can use these files as if they are in the same folder, even though they are on different drives?
View 4 Replies View RelatedI have discovered an issue with Windows 7 that has become quite annoying. I have tested it with many scenarios and the issue continues to exist.
If you try to delete a file off an additional hard drive (meaning not the primary drive) the system will delete it permanently. It will not ask you to move it to the Recycle Bin, it will just ask if you want to permanently delete the file. Any file on the drive will move to the Recycle Bin with no problem.
Also, files within archives (zip files) will permanently delete even if the archive is on the primary drive.
I am in the process of putting (5) 3TB HDD's into my computer (Windows 7 Home Premium 64 bit) to rip my Blu-ray collection to for playback in my home theater room via a Popcorn Hour player. Each drive is independent and I will be systematically filling one drive before going onto the next.The problem is that the Popcorn Hour players communicate with the PC by specifying one folder via SMB that contains all of my media. Since I am doing independent drives, there will be one master folder on each drive containing all of the media for that said drive. Meaning, in terms of the Popcorn Hour/SMB setup, there are five folders I need it to *see* and catalog.
View 9 Replies View RelatedI have a laptop running windows 7, connected to an external hard drive. I keep all of my .avi files on the external hard drive. I have set up sharing with the xbox - it picks up files in the following folders:
Downloads
Public Videos
Recorded TV
Videos in these folders can be played on the xbox. However, it doesn't pick up any of the shared folders in the external hard drive (G:Movies etc). The files on the external drive have been added to the WMP library and show up there no problem, and I have manually set the folders to be shared.
What I would like to do is to be able to access all of my music and videos from my computer and external hard drive, on my Xbox, through my router. I am using the Microsoft Security Essentials antivirus and firewall, and no third party antivirus/antispyware or firewall programs.I have an Xbox 360 Elite, not one of the new wireless versions. I went into HomeGroup on my computer and checked 'share media with devices' and also checked music, pictures, and videos. So far I can play music on the Xbox by going to the music app and choosing my PC. The problem is, I can only play songs that are directly in the Music folder on my computer. And only certain songs at that, I'm not sure why. I have a subfolder within Music called Full Albums and I cannot play ANYthing in that subfolder. What am I missing?Also, is it possible to access music and videos on my external hard drive? Provided my external hard drive is connected to my computer of course.Lastly, I can't access anything unless I disable Windows Firewall. How do I set up an exception for the Xbox so that I don't have to disable the firewall every time I want to do this?
View 1 Replies View RelatedI installed DU Meter yesterday just out of curiosity to see speeds yes, but mainly to see how much I am downloading/uploading.
My kids were watching a film on the 360 streamed from my PC. According to the Task Manager it is using 25% of my 100Mbps LAN speeds. So far so what.
DU Meter concurs 25Mbps. But according to the stats it has uploaded 10Gigs in the hour. But the film they are watching is only a 947MB avi.
How come a 947MB file generates over 10Gigs of stream data?
I've been using Windows 7 media streaming to my xbox for some time with no problems.However, I have just moved house, and have had to change my network setup as I have a new service provider. And now, the Xbox refuses to speak to the PC.They are both on the same network, using the same router, and I have changed nothing on the PC itself, except that when I first plugged the network cable in, Windows asked me to tell it which group to join (I selected Home). The xbox is happily detecting the network and the internet, but not the PC (although the PC name is still in the list under Video Apps, but when you select it it just says "Can not find PC".
View 2 Replies View RelatedI have 3 Hdds in my PC. On 2 i have installed WinXP, and they are installed separately, so i can boot without the other drive present. My motherboard has a boot manager so i can choose the boot drive.
Now i installed Windows 7 on the third drive, when the other 2 were disconnected.
It works fine by itself, but when i connect the other 2 drives, and choose the drive to boot from, the Windows 7 one says it has no OS installed. Other XPs boot correctly.
Any idea how to fix this?
My work laptop that has pointsec (disk encryption) on it, which is the first thing that loads.
If I was to install Windows 7 onto a external usb HD, would it overwrite the bootloader on the internal laptop HD?
Should I go into the Bios and try to disable the internal drive (not sure i can get to the bios)?
i want to have my normal backup, which is a backup of the user files on the d drive to my backup drive (drive X), now i also want to add another backup schedule, so i can backup my pictures specifically to a 4th hard drive, in this case drive drive H.
how would i add this 2nd backup on windows? is this possible? should i be looking for task manager? so far i have tried but cant find any options as access through Action Center Backup.
I've made the move (fresh install on new HDD) from XP to Win7RC x64 (I never gave Vista a look) and I want to scan my old HDD partitions for *.xls;*.doc;*.dwg;*.jpg etc to make sure I haven't missed any old files which were not saved in the right place.
The two partitions are mounted as F: and G:
In XP once you'd turned off the animated dog and chosen the advanced option, you could set "all of part of the filename" to "*.xls;*.doc;*.dwg;*.jpg" and "look in" to "f:;g:". It was a so easy
I can't seem to get Windows 7 to search for more than one file extension, let alone multiple drives as well. Is there an advanced search option which I've missed?
I want to save a file to multiple drives, simultaneously. RAID can join multiple drives, as far as I know, you can't have a temporary RAID setup, whereas, you have an external drive that is attached temporarily, how ever long temporarily is, save the file which is saved to the RAID, when you don't want the drive to be attached to a RAID you can stop the RAID, whenever, and it acts like a regular drive.
View 5 Replies View RelatedI have a C: drive and an E: drive on a Windows 7 X64 Media Center PC. Both have a directory called "Movies" ... when I start Windows Media Center and go to "Videos" I have a C:Movies AND an E:Movies.
Is it possible to merge both these directories into a single directory in Windows Media Center?
The C drive is 95% full so I can't copy the movies from the E: drive onto C: and the E: drive is 95% empty... so over time I'll add more movies to my collection (on the E: drive) and would really like to have ALL the movies from both C:Movies and E:Movie listed in a single directory and arranged alphabetically....
Ps. I've already tried adding both directories to the windows library 'Movies' directory but you can't access the 'Movie' library from within the Media Center!
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies View Relatedack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
View 9 Replies View RelatedOn my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.
The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)
drive spaces: C: = 40gb D: 200gb E: 200g
Why does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
i'm working with a new pc build that uses a 60 gb ssd for its boot drive, and which is also reusing some "old" sata hdds for storage.
at the time i installed windows 7 ult 64, i had only a new ssd plugged in, and the bios was set to ahci mode. the installation went fine and i was able to boot into windows afterwards without issue.
then, i connected a wd caviar black sata hdd to use as storage, with the ssd being the boot drive. with both of them connected, windows will not get past the starting windows screen.
i made this video of the program before i understood that it was a drive controller issue: startup problem - Internet in it, you can see that windows boots fine in ahci mode with just the ssd plugged in, but that when the backup sata drive is also connected it doesn't get past the starting windows screen.
for the record, this caviar black hdd was my previous boot os, and it also has a windows 7 install on it (which i've renamed the base folder of), but it is not booting from that hdd. also, i have tried the same thing with other "old" sata hdds that do not have any previous windows install on them, and the result is the same thing which is shown in the video.
Is there any way to use 2 XBOX 360 Controllers for Windows and 2 XBOX 360 Wired headsets at the same time in a game on the same PC? I have tried and both headsets are working properly independently but was just hoping to get them both outputting sound primarily with both microphones recording as the secondary priority.
View 7 Replies View RelatedI want to buy an xbox wired controller to play games on pc with the controller. My question is that the controller works as the same like on xbox? Actually, I mean the analog sticks. It has the same sensitivity on pc like on xbox? Because in the keyboard you can push the button or not. With the analog sticks you have more possibility, sensitivity.
View 10 Replies View Relatedi built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.
View 5 Replies View RelatedI've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.
View 5 Replies View RelatedI currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on
upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?
If I Format my Hard drives ,do I lose all my systems ,Like Windows???
View 4 Replies View RelatedI am getting ready to install windows 7 professional on my XP machine, I know I have to format the hard disk. If I have two hard drives and just copy everything from the drive I'm erasing to the other one and disconnect it during installation to make sure no data gets lost, will the second drive still work when I reconnect it after the install is finished? Both drives are IDE
View 3 Replies View RelatedI have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
View 2 Replies View Related64installed on c, win 7 later installed an d. dual boot has been working perfectly until
something caused the drives to switch. now win 7 starts ok but looks for all it's files on c, which is locked.
vista starts up fine, and sees all it's files on c as it should.
my windows 7 repair disk, created at start of win 7, does not correct problem, nor does system restore.
