I have 3 Hdds in my PC. On 2 i have installed WinXP, and they are installed separately, so i can boot without the other drive present. My motherboard has a boot manager so i can choose the boot drive.
Now i installed Windows 7 on the third drive, when the other 2 were disconnected.
It works fine by itself, but when i connect the other 2 drives, and choose the drive to boot from, the Windows 7 one says it has no OS installed. Other XPs boot correctly.
i want to have my normal backup, which is a backup of the user files on the d drive to my backup drive (drive X), now i also want to add another backup schedule, so i can backup my pictures specifically to a 4th hard drive, in this case drive drive H.
how would i add this 2nd backup on windows? is this possible? should i be looking for task manager? so far i have tried but cant find any options as access through Action Center Backup.
I'm gonna be moving from a 32-bit XP OS to the Windows 7 64-bit version. Before installing the OS, I'm gonna unplug my 2nd Hard drive where there's no OS installed, just storage.
Will I have to do anything special on the 2nd HD when I replug it in Windows 7? No reformatting is needed right? Because I backed up my files on that HD.
I just rebuilt my desktop and installed Windows 7. I had thought to put My Pictures and My Music on separate Hard Drives from the Operating System and everything else; OR would performance be better with all on one hard drive and backing up the My Music and My Pictures to separate Hard Drives? I'm using i7 processor with 8G RAM and 500GB hard drives (3); with a 1 Tetrabit External MyBook.
I use a backup software called Macrium Reflect and they have an option for splitting your backup archive. I have a split archive that I have stored over multiple hard drives (because it is a very large file), but I cannot open the archive unless the archives are all in one folder. Is there some way to make a "virtual directory" or network drive so that I can use these files as if they are in the same folder, even though they are on different drives?
I've made the move (fresh install on new HDD) from XP to Win7RC x64 (I never gave Vista a look) and I want to scan my old HDD partitions for *.xls;*.doc;*.dwg;*.jpg etc to make sure I haven't missed any old files which were not saved in the right place.
The two partitions are mounted as F: and G:
In XP once you'd turned off the animated dog and chosen the advanced option, you could set "all of part of the filename" to "*.xls;*.doc;*.dwg;*.jpg" and "look in" to "f:;g:". It was a so easy
I can't seem to get Windows 7 to search for more than one file extension, let alone multiple drives as well. Is there an advanced search option which I've missed?
I want to save a file to multiple drives, simultaneously. RAID can join multiple drives, as far as I know, you can't have a temporary RAID setup, whereas, you have an external drive that is attached temporarily, how ever long temporarily is, save the file which is saved to the RAID, when you don't want the drive to be attached to a RAID you can stop the RAID, whenever, and it acts like a regular drive.
I have a C: drive and an E: drive on a Windows 7 X64 Media Center PC. Both have a directory called "Movies" ... when I start Windows Media Center and go to "Videos" I have a C:Movies AND an E:Movies.
Is it possible to merge both these directories into a single directory in Windows Media Center?
The C drive is 95% full so I can't copy the movies from the E: drive onto C: and the E: drive is 95% empty... so over time I'll add more movies to my collection (on the E: drive) and would really like to have ALL the movies from both C:Movies and E:Movie listed in a single directory and arranged alphabetically....
Ps. I've already tried adding both directories to the windows library 'Movies' directory but you can't access the 'Movie' library from within the Media Center!
I installed my Windows 7 OS on a 200GB HDD. Recently, I installed a 500GB HDD in my PC. I used to be able to stream media files to my Xbox 360 with no problem with the media files being on the 200GB HDD. However, I've transferred all my Media Files to my 500 GB (secondary) HDD. The Windows Media Centre on the Xbox 360 isn't giving me any sort of option to stream files from the 500 GB HDD. So, what exactly do I do?
I have discovered an issue with Windows 7 that has become quite annoying. I have tested it with many scenarios and the issue continues to exist.
If you try to delete a file off an additional hard drive (meaning not the primary drive) the system will delete it permanently. It will not ask you to move it to the Recycle Bin, it will just ask if you want to permanently delete the file. Any file on the drive will move to the Recycle Bin with no problem.
Also, files within archives (zip files) will permanently delete even if the archive is on the primary drive.
I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
ack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
On my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.
The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)
i'm working with a new pc build that uses a 60 gb ssd for its boot drive, and which is also reusing some "old" sata hdds for storage.
at the time i installed windows 7 ult 64, i had only a new ssd plugged in, and the bios was set to ahci mode. the installation went fine and i was able to boot into windows afterwards without issue.
then, i connected a wd caviar black sata hdd to use as storage, with the ssd being the boot drive. with both of them connected, windows will not get past the starting windows screen.
i made this video of the program before i understood that it was a drive controller issue: startup problem - Internet in it, you can see that windows boots fine in ahci mode with just the ssd plugged in, but that when the backup sata drive is also connected it doesn't get past the starting windows screen.
for the record, this caviar black hdd was my previous boot os, and it also has a windows 7 install on it (which i've renamed the base folder of), but it is not booting from that hdd. also, i have tried the same thing with other "old" sata hdds that do not have any previous windows install on them, and the result is the same thing which is shown in the video.
I am in the process of putting (5) 3TB HDD's into my computer (Windows 7 Home Premium 64 bit) to rip my Blu-ray collection to for playback in my home theater room via a Popcorn Hour player. Each drive is independent and I will be systematically filling one drive before going onto the next.The problem is that the Popcorn Hour players communicate with the PC by specifying one folder via SMB that contains all of my media. Since I am doing independent drives, there will be one master folder on each drive containing all of the media for that said drive. Meaning, in terms of the Popcorn Hour/SMB setup, there are five folders I need it to *see* and catalog.
I just finished installing Windows 7 Enterprise x86 on someones PC, and installed some drivers and applications.However, I've gotten 2 BSOD's (so far) whilst browsing with Internet Explorer, the computer was not stressed. Another one was during an online ESET Virusscan.I don't quite feel like installing Windows 7 YET again, so any help trying to locate the error and fixing it is much obliged.
Windows 7 Enterprise x86 ASUS P5RD1-V Ati RADEON X300 Onboard Graphics
I installed Windows 7 Home Premium on my laptop a few days ago. Unfortunately I can detect my hard drive beginning to fail in the last day or so.
I have the single licence single PC edition.
Windows 7 has been activated on my system, can I replace the hard drive and reinstall Windows 7 to a new hard drive on my PC?
I am guessing it is ok as I suspect my PC serial no. is stored in a Microsoft database somewhere when activated and therefore not dependant on the hard drive.
I was having windows 7 as my os. But due to some work I had to install xp in one of the drives. Later I uninstalled xp. But at the time of booting 2 choices appear - xp and windows 7. Windows 7 is ok as it is my OS. But if I choose xp then an error message appears - unable to find hal.dll in system32 directory. I don't know why this choice of xp appears when I don't have xp installed.
I clean installed Windows 7 on my HP Pavilion DV6-6C35DX laptop using these 2 guides: SSD / HDD : Optimize for Windows Reinstallation Clean Install Windows 7
I noticed when I was installing Windows 7, I never had a screen pop up (step 17) asking about my network location type. After Windows was installed, my laptop couldn't find any networks regardless if I tried plugging an ethernet cord from my modem into my laptop. When I click troubleshoot it says, "Install a driver for your network adapter". I click next it says, "Windows could not find a driver for your network adapter". I look in my Device Manager, I see under Other Devices it lists: Ethernet Controller, Network Controller, PCI Device, SM Bus Controller, Universal Serial Bus (USB) Controller, Universal Serial Bus (USB) Controller, Unknown Device, and Unknown Device all with yellow exclamation marks next to them.
My Googlefu skills told me that when clean installing windows it only installs generic drivers, and I need to install the drivers on my motherboard disk. The problem is my laptop didn't come with any such disk. I tried going on HP's website on another computer, and burning all the network drivers onto a blank DVD ( can't use a USB since those drivers are not working). When I installed them nothing really happened.
System: Dell Inspiron laptop, Studio 16 XPS Windows 7 Home Premium w/Service Pack 1 (64 bit) Intel Core Duo 2.8 Ghz, 4 GB RAM.
The problem is that Flash will not stay installed. Another problem (related?) is that I *cannot* install Itunes on this computer, it will error out each time, and Apple is notorious for telling me it is a Windows problem, nothing they can do, so I found a way around the "long pole in the tent" requirement of Itunes to Sync iPad/iPod, and this really isn't even a "problem" anymore as much as an annoyance. Other utilities, Avast virus protection, Malware Bytes, Spybot Search/Destroy with immunization, and always running Iolo System Mechanic.
All software and operating system is up to date with current patches and updates. A program I use regularly that may be suspect but also seems so innocuous as to have no bearing on it is a keyboard macro program, Keyboard Express v4. For example with this program, I can define some hot keys like ALT-CTRL-T which will insert some text I define to the program into wherever the cursor is at on the current web page or Word document. Always text, no graphics or funkiness here.
I usually use Firefox (v11.0) as my browser but interestingly enough, I discover that Flash has also disappeared when I go to IE (v9), and it appears there is a different Flash for IE than there is for Firefox, depending on which browser is used to download (multiple times daily) the Flash installer. An interesting aspect is that after I re-install Flash, IE and/or Firefox, then later on go to Outlook and click a link in an email, Outlook gives me an error message about not being able to open the link. But if I reboot, Outlook is now fine to click on and open that same link, although Flash has again gone away.
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 3 RAM: 8191 Mb Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb Hard Drives: C: Total - 476837 MB, Free - 246483 MB; Motherboard: BIOSTAR Group, N68S3B Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.