Is there any way to use 2 XBOX 360 Controllers for Windows and 2 XBOX 360 Wired headsets at the same time in a game on the same PC? I have tried and both headsets are working properly independently but was just hoping to get them both outputting sound primarily with both microphones recording as the secondary priority.
View 7 RepliesCan I use two Wired Xbox 360 controllers to play games like Fifa 12 & Virtua Tennis 4 multi-player with a friend locally? I've read you can do it with the wireless controllers but I cannot find any evidence on using two wired ones.
View 7 Replies View Relatedumm, the problem started when i bought a china game controllers it worked perfectbut some new games only supports the xbox game controller o my question is is there some kind of a program that will make the game
View 4 Replies View RelatedI want to buy an xbox wired controller to play games on pc with the controller. My question is that the controller works as the same like on xbox? Actually, I mean the analog sticks. It has the same sensitivity on pc like on xbox? Because in the keyboard you can push the button or not. With the analog sticks you have more possibility, sensitivity.
View 10 Replies View RelatedI got a very funny issue with my xbox 360 controller here... I bought it 3 years ago while im still in college, often used it on my laptop (win xp) and it runs well, no problem.
Last year i bought a new PC with Windows Vista, and still no problem, i played many games with that. The problem exist since i format my PC to Windows 7 ultimate 32
Here's the funny stuff, after few experiment, i found out that "The longer I dont use the controller, the longer i can use it afterward" I guess u will confuse about what im talking... but its true
For example.... I turn on my PC, and i did not plug in the controller for hours, maybe surfing webs or do some stuffs, then when i decided to plug it on to play some games, it actually works but it has a limited time. After some time, it stop working and the green light disappear. Like I turn on the pc without plugging in the controller for 30min, then when i plugged in i can use about 30min (i didnt record it, just for u to understand easily)
When i try to unplug it and plug it on again, the green light on the controller flash once, and my pc said USB Device not recognized, what the heck is this?
I've even tried to restart the PC, windows 7 loaded, i plug in the controller, about few minutes it not working again
I've been searching for solutions for few hours, updating the driver from the microsoft website, XBCD and few emulator, tried it but nothing helps
I've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from c:windowssystem32drivers), but it still blows up every time I've gone to the Microsoft site and downloaded the drivers there too. Basically, I install the Accessories part, and that's fine. Then when I plug the controller in, it takes about 3 seconds and then BAM. BSOD. Upon restarting, if I plug it in, it doesn't BSOD, but it sure doesn't work either. Oddly enough, the MotionInJoy driver reappears in the system32/drivers folder occasionally after a BSOD.
View 6 Replies View Relatedhow i can get my wired xbox controller working on call of duty it work on other thing like minecraft just not this game?
View 6 Replies View RelatedRecently purchased an older wired Xbox 360 controller to play emulated retro games on my netbook. From the research I've done, windows should install the correct drivers when I plug the controller into my USB port, correct? Absolutely nothing happens when I plug the controller into the computer. I'm new to PC so I'm sure I'm making a simple mistake. I've downloaded the Xbox 32Bit controller software from microsoft and still nothing. I see nothing in device manager or anywhere else on my computer. The controller doesn't light up when I plug it in or anything
View 5 Replies View RelatedOk, so I've researched this problem extensively, and have not come up with much. A lot of the articles online are from years ago and the few solutions that are posted don't work. So I'm resorting to posting on here in hopes someone has a more recent fix to for this.
I have an official Microsoft wired xbox 360 controller. I've tried using it on FIFA 12, Arkham City, and Saints Row 3. Every time I get to the game and use the controller it freezes the game and will not unfreeze until I unplug the controller. The thing is, windows recognizes the controller in the device manager and I can use it to browse the games' menus before starting the game. I have the "official" microsoftdrivers downloaded from here:
[URL]
I've tried uniinstalling all drivers related to the controller, all the HID compliant devices, restarting the system, disabling driver signing enforcement, reinstalling Microsoft's drivers. But every time I plug the controller in, it installs these motionjoy drivers automatically, and still freezes the game. Also I noticed my mouse becomes jerky when I move it while the controller is plugged in. This problem is ridiculous to me, because I know that the xbox 360 wireless controller works perfectly fine with games, since my roomie has a wireless USB hub for a wireless xbox controller and I've tested it with the same games. It blows my mind that a Microsoft product is not compatible with another Microsoft product, but I will reserve that rant for another time. And by the way my comp is good enough to play these games as I can play them just fine using mouse and keyboard.
My system is running windows 7 ultimate 64. I downloaded the latest xbox 360 controller driver from microsoft. When I plug my controller in, the 1 and 4 lights, both blink real fast and nothing else happens. It is not recognized under devices or in the computers device manager.
View 1 Replies View RelatedI am trying to use an xbox controller to play RAGE on my pc, but even when I select the gamepad for use it does not work. Yet, the xbox controller buttons are displayed for the mouse, eg A instead of E for interaction. I am probably missing something really obvious, but I am not terribly pc literate. What should I do to use the gamepad?
View 2 Replies View Relatedi want to download the driver for my gamepad generic xobx 360 i donīt have any instalation cd or driver and i donīt know which manufacturer is eihter in panel control hardwar id show me this: USBVID_FFFF&PID_FFFF&REV_0100 i have w7 32 bits and i already tried downloading the original xbox wired controller from microsoft webpage.
View 3 Replies View RelatedSo I just got this Xbox 360 controller for gaming and downloaded the hardware at the Microsoft Hardware web site, but when I go to activate it in the "game controllers" option in the control panel, the icon doesn't show. So I went on the internet trying to find some way to get around this whole thing. I found a post on this web site that was very useful and it took me to device manager where I followed the step by step instructions to install the driver, but when I tried to install the driver on my PC it would say: "Windows found driver software for your device but encountered an error while attempting to install it." Then it says: "This device cannot start. (Code 10)"
View 1 Replies View RelatedI'm trying to get my Xbox 360 controller to work on my PC. It's wireless and I'm trying to use the USB charge cable. If there is anyway to make this work so I can use my 360 controller on zsnes.
View 7 Replies View RelatedI have downloaded the software pack and when I plug my wired controller in almost everything works perfectly, BUT whenever I press the right trigger (left trigger too on some games, I've tried this with multiple games) the game just freezes, it won't unfreeze until I unplug the controller. This only happens during gameplay, pressing the RT any time where it won't register doesn't do anything.
View 2 Replies View RelatedI need sound, video and game controllers for windows 7 ultimate.
View 2 Replies View Relatedi'm trying to connect my Xbox to my Windows 7 laptop and then to the internet via dongle, i had this set up on my old Windows Vista laptop and it worked ok.My windows 7 laptop is seeing my Xbox but the Xbox can't find my laptop! very fustrating!When i run network diagnosis it comes up with IP addess disabled?
View 1 Replies View RelatedI am running Windows 7 Ultimate 32bit. I have a Virgin Media SuperHub, which is both a wireless modem and 4-port router in one unit.
I have my Xbox 360 connected to the hub via Ethernet cable, and connects to Xbox Live perfectly fine. My computer is connected to the hub as well, and connects to the internet perfectly. I have a HomeGroup set up in my network connections, and I am very sure both devices are connected to the same network. However my computer does not recognise the Xbox being connected to the network, and my Xbox does not show the PC as on the network. So they are both connected by cannot find each other.
I have spent hours fiddling around with network settings, my SuperHub is set to allow other devices to connect through it. My HomeGroup has all sharing options turned on, I have disabled my firewall, I have gone through countless forums stating that Windows 7 has alot of network sharing options automatically disabled as default, therefore I have manually run the system settings and enabled all recommended processes etc. I have restarted my Xbox and PC a million times, but they still won't find each other.
So I usually use my laptop as an adaptor to connect to xbox live using the bridge connected to my wifi. So today I tried connecting like usual but for some reason, it didn't work! I tested my xbox live connection and it couldn't even connect to the network.
When i select more info it says "your modem isn't assigning an IP"
I've been using Windows 7 media streaming to my xbox for some time with no problems.However, I have just moved house, and have had to change my network setup as I have a new service provider. And now, the Xbox refuses to speak to the PC.They are both on the same network, using the same router, and I have changed nothing on the PC itself, except that when I first plugged the network cable in, Windows asked me to tell it which group to join (I selected Home). The xbox is happily detecting the network and the internet, but not the PC (although the PC name is still in the list under Video Apps, but when you select it it just says "Can not find PC".
View 2 Replies View RelatedI am trying to connect my wired Xbox 360 controller to my Windows 7 computer. However, when I plug it in, Windows literally doesn't even know that it is plugged in. Nothing happens. I've tried plugging it in in several different ports, all with the same result. I also have a Plug'n play controller that I am trying to use, and while Windows recognizes that the Plug'n play system is plugged in, the controller doesn't work. I have downloaded the software from Microsoft, and still it doesn't work.
View 1 Replies View Relatedmy controller was working fine until 1 day when i plugged it in the windows didnt recognise it and a message appeared saying usb device not recognised and the error was code 43.i have lost 2 of my joysticks just like this.
View 9 Replies View Relatedxbox 360 wireless controller for windows not recognize by my pc need help....?
View 6 Replies View RelatedI have been having trouble connecting mypc to my xobox slim. I have been through the network setting, all match up. the xbox can connect to live, it just won't connect to my pc. i allow all conection and turn off a/v and firewall still with no luck. i even tried connect them through ethernet wire, again no luck. i know my pc can connect to a xbox ( old white big guy) both wireless and wire, but i am having no luck with my xbox slim. and yes i have reset all extender stuff on pc and reet pc connection stuff through my xbox. the a/v i have is microsoft secrity esentals.
View 1 Replies View RelatedI setup the windows media center extender and it works fine. But my issue is with my Computer. My proccessor is maxxing out whenever the process for the Media Center Network is running. The only solution i have found is to end the process manually. But it will randomly re open the process on it own and cause my proccessor to max out and use about 3/4ths of my RAM. It still re opens the process even when my 360 is shutdown and media center is not be used on the PC
View 2 Replies View RelatedI've installed and re-installed the XBOX 360 Media Center Extender to many times to count. Each time I install it the thing fails - absolutely will not connect with my Xbox. The _only_ way I can get it to work is to disable the Windows Firewall. Probably not the ideal thing to do.
Is there a way I can keep Windows Firewall enabled? Some of the tutorials out there say to add an exception for "Media Center Extenders", but nowhere do I see this within the settings. My system, BTW, is Windows 7 Ultimate.
Additionally, I should add that I'm hooked up wirelessly from both machines (PC and Xbox). When I connect the Xbox (when the firewall is disabled) I find the browsing is painfully slow. Any workarounds for that as well?
I have Windows 7 Home Premuim x64 Bit Service Pack 1. I just bought the Xbox 360 wireless controller for windows which comes with a receiver to play on the pc. When I got it I just plugged in the receiver and connected the controller it came with and it worked fine just after using for a while, did it stop connecting to the controller and after that i wouldn't connect anymore so I installed the software that it came with update the driver but still it won't connect then I unistalled the driver and software restarted the computer installed everything again and still I can't get the controller to sync with the receiver. Even tried This but I cant install the different driver because it says driver has already been installed and is up to date:
Right click on Computer
Go to Properties
Click on Device Manager
Right click on the Unidentified Device
Go to Properties
Go to the Drive tab
Click on Update Driver
Browse my computer for driver software
Let me pick from a list of device drivers on my computer
Microsoft Common Controller for Window Class
---Xbox 360 Wireless Receiver for Windows Version: 2.1.0.1349 [8/13/2009]
The problem is iv purchased the headset today and bought a belkin f8t017 usb Bluetooth dongle. The problems im having is one is the driver disk i got with the dongle wont install, it just says install failed. and the other is the headset wont recognise as a headset for some reason. The headset works on mine and the Mrs mobile phones with out a problem.Is there something iv missed out? Iv looked on-line but cant find anything specificity about my situation.
View 4 Replies View RelatedIn the old place my PC was upstairs but had an ethernet connection to the router downstairs.In the new place I have to run it on the wireless. I have got a 2/3 bar connection to the router, and can stream to the Xbox without a problem, for the most part.The problem occurs (and it's becoming more regular) when I turn both bits of kit on and the PC (in the media centre menu) says the Xbox is connected but the Xbox says no connection can be found.It then lists the normal helpful suggestions, and what I have to eventually do is unlink them and re build the connection.When that is back, it works fine, but turn them off and have to start all over again.
View 1 Replies View Relatedi am trying to connect my xbox 360 as an extender. i get all the way through the setup and it fails at the last step. i have gone into my firewall and the media extender is ticked to allow. i have also manually set up rules to allow all the ports i found on the microsoft site to be allowed. lastly, i tried the microsoft fix it tool on the microsoft support site. i have run out of ideas. the xbox is definitely on the same network as me, it can see my laptop and also my iomega iconnect when i go into setting and network connections. it tests positively when i test the network connection, but fails when i test the media centre connection.
i have gone through the setup 3 times now (i.e. reset the connection and put in another 8 digit code to set up) but still no luck.
im looking for the driver for the xbox controller receiver for windows 7
View 2 Replies View Related