Intermittent Windows Media Centre And Xbox Connection
May 12, 2012
In the old place my PC was upstairs but had an ethernet connection to the router downstairs.In the new place I have to run it on the wireless. I have got a 2/3 bar connection to the router, and can stream to the Xbox without a problem, for the most part.The problem occurs (and it's becoming more regular) when I turn both bits of kit on and the PC (in the media centre menu) says the Xbox is connected but the Xbox says no connection can be found.It then lists the normal helpful suggestions, and what I have to eventually do is unlink them and re build the connection.When that is back, it works fine, but turn them off and have to start all over again.
is there any way to increase the buffer size i don't know whether this should be done on the computer or on the xbox i think it is the xbox as they seem to play ok on the computer.
when i play the avi's it seems as if only about 5 - 10 seconds is buffered then it plays then stutters then plays and so on .
my problem is that Windows media centre will not allow me to open any programmes it seems to have taken over as my default, I have tried going in to control panel, programmes, to turn off windows features but as soon as i do up pops windows media centre, I have tried removing windows media centre but cant find it on un-install programmes, most of my desk top programmes have the windows media centre icon on them like it must be that which opens them.
Windows Media Centre keeps opening up all the time, every few minutes or so. But it's always if I'm doing something. Just closed a program? Windows Media Centre opens. Just saved something? Windows Media Centre opens. Minimizing Firefox to get ready to open something else? You guessed it.But if the computer is idle it won't happen. There is also nothing else apparently wrong with the computer.I never use Windows Media Centre so I wouldn't even mind getting rid of it but I don't know if Windows Media Player relies on it which I do use for certain video formats from time to time. So unless someone says otherwise, I'd rather just disable it as opposed to removing it.
I've got two nice little 1680 x 1050 20.1" Dell S-IPS monitors, which are de-facto 16:10 units, mounted on an Ergotron stand, with the intention of using one for television and the other for computing purp's.My Graphics card is a capable Palit HD4850 Sonic with dual DVI outputs. It's also got an S-Video output which isn't in use.What I would like to do is run WMC maximised on one monitor, with TV there as and when I wish to view anything, and naturally I wish to use this screen maximised (the only issue in WMC is that there is a limitation of either choosing 4:3 or 16:9 ratio output, and not 16:10).However when I connect both monitors vai DVI output Windows7 locks my cursor in the maximised TV screen and I then cannot control the primary PC monitor whatsoever - which is somewhat of a complete farce, and is an extremely dissappointing result!Accordingly I have to drag the WMC display to get the 16:9 output to 'almost' fill the 16:10 monitor, and then face the annoyance of the cursor drifting to that screen from my PC monitor from time to time (I can happily live with a band to allow for the 16:9 ~ 16:10 hardware differential... but not this ridiculous loss of cursor control!)Question is this... why does my cursor focus get restricted to one screen if the Windows Media Centre is maximised? The whole point of having dual-monitors is being able to use both of them at once of course.I've tried with the ATi driver alone, and with the Catalyst suite loaded, with no differences to the issue.My monitors also have an S-Video input, but I've not got an S-Video cable to hand right now - however... if I were to use S-Video for one monitor would I avoid the 'locked in cursor' problem?
Having recorded a TV programme last night on my computer running Windows 7 using Media Centre, I want to burn this prog to DVD to keep it. Why does Media Centre tell me the there is not enough room on the DVD (4,7 gig) to record a programme which is only 2 gig in size? It offers to do it at reduced quality and warns it may take several hours - anyone know why this is and if there is better sodtware out there to do this job.
I have with Windows Media Centre while watching TV on my Computer. I have an inboard Gigabyte GA-PTV-TAF-RH Hybrid TV card and am running it in my 64bit Windows 7 Pro. WMC picks up all the TV channels and works well until I click the pause button. I then lose all picture and when I unpause there is only sound until I pause/unpause again, then I lose sound as well and WMC crashes with the error message "WMC has stopped working". When I restart all is fine until I pause again, and then I have the same problem.Windows tells me all my Drivers are up to date and working so I don't know what is causing this problem.
I am currently using Windows 7 X64. My wife recently purchased me an Xbox 360 Elite for my birthday, but I am having some problems setting it up as a media extender. (to put it mildly)When I go into Windows Media Centre I can immediately see the Xbox with an option to configure, so I jump through the hoops and enter the number from the Xbox into Windows media Centre. I then get the message:Configuration ErrorAn error was encountered while configuring your computer for use with this extenderI have followed the steps at
I have suddenly found that media centre when opening live tv i have the sound but no vision. It displays the progress bar OK and you can can even display the active thumbnail when you left click progress tracker,but just black full screen,i have all latest drivers for sound and graphics.I have reloaded direct x and codec drivers ,tried retuning ,tried resetting monitor,all to no avail.My system OS is w7 x64 ,CPU 6600 O/C 2.4 GHz, GPU NV GTX460.4MB Ram.
Can anyone explain what I need to do with this error message in order to be able to use Media Centre for live TV.
"Files needed to display video are not installed or are not working correctly. Restart windows media centre or restart the computer".
I have an analog cable plugged into my new TV card (Its an older PC, Dell Dimension 3100) and I can see the TV channels using Win TV 7 that came with the card.
Windows Media wont even play its own sample video without giving me the above error message.
So, time to take a couple steps back and slow things down a bit here... I'm currently in the planning stages of a low-budget media centre / network storage setup and I'm hoping to glean some knowledge from some of you more experienced overclockers before I go wasting money on things I don't need.The reason I decided to post here and not in the general or media sub-forums is because of how I want to go about this. Part of my plan involves taking a decent spec system and underclock the **** out of it.... Or, at least just underclock it enough for a fanless setup. Firstly, the media centre itself is a low-cost project... So the obvious OS choice here is Linux. But, which one...? It doesn't need to have any fancy GUI or "user friendly" features. At boot, the OS itself will go straight into whichever media centre software I settle on (XBMC, MythBuntu, etc. etc.), with other services starting up silently in the background (nginx / Apache, MySQL, Samba, Webmin, etc. etc.).Everybody in my household are avid Android users (yay), so the box will most likely be controlled directly from our phones or tablets. I mean, seriously, can you name one true computer geek that wouldn't grin from ear to ear while they tell their friends how their TV remote is actually a 7" multitouch, dual-core, Android tablet...?
What sort of hardware would I need for this setup? Here's the first idea that comes to mind:1.4 to 1.8GHz dual core 1 to 2GB DDR2-PC6400 40 to 80GB OS drive Multiple 1 or 2TB 'green' drives Low profile GPU (s-video for now, HDMI can come later) Either completely fanless, or mostly fanless with a single 200mm fan at low speed for good airflow I may possibly build my own case from the ground up.I'm hoping to get this all running from the start with nothing larger than a 300w to 350w PSU if possible, perhaps even one of those funny L-shaped midget PSUs from an old Dell desktop? I'm sure many of you here are old enough to know which ones I'm talking about.. Heck, those things came with nothing more than a 40mm or 50mm fan if I remember correctly.What hardware would you guys use for a system like this? Fire away, I like constructive criticism.
I've just upgraded my Media Centre from Vista x64 to Windows 7 x64.Previously when watching recorded TV I could use the skip fwd/back buttons on my remote &/or keyboard to skip fwd 30 secs, or back 7 seconds; however this no longer works. They do however work perfectly when watching/listening to Movies/Music.The on screen skip buttons still perform the same task (fwd 30s, back 7s).Reading other forum posts I gather this is because the skip buttons are looking for the next track and by its nature recorded TV doesn't have any tracks.Is there a way of editing the registry to reprogram the buttons to skip fwd a specified time frame when watching recorded TV? I'm using a logitech dinovo edge keyboard for which I've installed the latest drivers. I also use my iPhone with JumiMouse as a Remote and a Hauppage TV Tuner Remote, all the above have the same problem.
I am sure that there is an answer to this, but am lost... I have about 28,000 songs which are stored on my Windows 7 Enterprise Media Centre PC. All the ID3 tags are correct (I think), but I cant get the music library working properly on the PC or Extender.The problem I have is with my Various Artists albums... the ID3 tags show song title, artist and album artist. on a various artist album the Album Artist field is set to "Various Artists". I am using an Xbox360 media extended in my living room and whilst its slow, thats a seperate issue, there are some unexpected results when searching for songs...If you search for an artist, if they have produced albums where they are the only artist, then they are listed - the ID3 tags on their personal albums have the Album Artist field set as the Artist field and all works. However when listing by Artist, there is an artist listed called "Various Artists" and every song (12,000+) which is on a compilation album is listed as being by "Various Artists" as MC seems to get the artist name from the "Album Artist" field rather than from the "Artist" field.
I thought I'd found a workaround by changing the Album Artist field to be the same as the Artist - indeed this did work, but the unexpected side effect is that when you search by album, because each track on an album shows a different Album Artist set in the ID3 tag, it lists the album seperately for every song... so you may have "Now Thats What I Call Music xx" listed 20 times - once per song!Is there any way to get media centre to catalogue songs using the "Artist" field rather than the "Album Artist" field - but also to take into account that even though songs are by different artists, should the Album Artist all be the same - then to treat as a single album??I have only just started researching this and have read a bit about Media Centre using the catalogue created by WMP - but to be honest I have never used WMP and wouldnt know where to start.
I've been using Windows 7 media streaming to my xbox for some time with no problems.However, I have just moved house, and have had to change my network setup as I have a new service provider. And now, the Xbox refuses to speak to the PC.They are both on the same network, using the same router, and I have changed nothing on the PC itself, except that when I first plugged the network cable in, Windows asked me to tell it which group to join (I selected Home). The xbox is happily detecting the network and the internet, but not the PC (although the PC name is still in the list under Video Apps, but when you select it it just says "Can not find PC".
I have a problem where my Internet connection will drop at least once a day. I have Windows 7 Business x64. It will first simply stop working, as in it looks like it's connected, it still has a public IP but I can't ping out and no browsers work, nor any games etc (you get the picture). If I try release/renew it'll either hang or give me a 169-address. To fix it I have to reboot my computer and it starts working again.
I have an Asus P5KC motherboard using the Windows 7 Windows Update drivers, and it's been like this pretty much since the start. I've turned off all power saving modes everywhere I could find and any sort of hibernation settings, and still it'll cut off almost always once a day. (I have a VNC server so I can log on from work, so I can tell when it 'crashes'.)
What's funny is that it often doesn't happen when I'm on the computer, it's mainly when I've been gone for a bit. That's not to say it hasn't happened when I've been at it, it's just more uncommon.
It's setup to a switch which in turn is connected to my modem. What's telling me that it isn't neither the modem nor the switch that has the problem is the fact that I have a mediastation which doubles as a webserver also connected to the router and it has never once cut out. I've tried switching the ports on the switch (ha-ha) to no avail.
I've been thinking about installing the Vista x64 drivers from Asus but I'm leery of trying because I don't know how similar the two systems are.
Is this a general issue with this board? I'm getting really sick of this problem. Hope somebody can help.
Also, I'm sorry for not posting this in the megathread we apparently have but I couldn't bear slogging through 43 pages of white noise and hope that my post wasn't lost at the tail end of it. There are so many issues being handled in there that I can't make heads or tails of who has the same problem.
I have been having trouble connecting mypc to my xobox slim. I have been through the network setting, all match up. the xbox can connect to live, it just won't connect to my pc. i allow all conection and turn off a/v and firewall still with no luck. i even tried connect them through ethernet wire, again no luck. i know my pc can connect to a xbox ( old white big guy) both wireless and wire, but i am having no luck with my xbox slim. and yes i have reset all extender stuff on pc and reet pc connection stuff through my xbox. the a/v i have is microsoft secrity esentals.
I setup the windows media center extender and it works fine. But my issue is with my Computer. My proccessor is maxxing out whenever the process for the Media Center Network is running. The only solution i have found is to end the process manually. But it will randomly re open the process on it own and cause my proccessor to max out and use about 3/4ths of my RAM. It still re opens the process even when my 360 is shutdown and media center is not be used on the PC
I've installed and re-installed the XBOX 360 Media Center Extender to many times to count. Each time I install it the thing fails - absolutely will not connect with my Xbox. The _only_ way I can get it to work is to disable the Windows Firewall. Probably not the ideal thing to do.
Is there a way I can keep Windows Firewall enabled? Some of the tutorials out there say to add an exception for "Media Center Extenders", but nowhere do I see this within the settings. My system, BTW, is Windows 7 Ultimate.
Additionally, I should add that I'm hooked up wirelessly from both machines (PC and Xbox). When I connect the Xbox (when the firewall is disabled) I find the browsing is painfully slow. Any workarounds for that as well?
i am trying to connect my xbox 360 as an extender. i get all the way through the setup and it fails at the last step. i have gone into my firewall and the media extender is ticked to allow. i have also manually set up rules to allow all the ports i found on the microsoft site to be allowed. lastly, i tried the microsoft fix it tool on the microsoft support site. i have run out of ideas. the xbox is definitely on the same network as me, it can see my laptop and also my iomega iconnect when i go into setting and network connections. it tests positively when i test the network connection, but fails when i test the media centre connection.
i have gone through the setup 3 times now (i.e. reset the connection and put in another 8 digit code to set up) but still no luck.
For the past few days, I have been on a intermittent wireless connection. Under the wireless network icon, there's an ! mark, I tried to solve it using Microsoft diagnosis, but it didn't work. I switched off Microsoft Miniport Adapter too, didn't work as well. I Pinged my own connection using Command Prompt and the results were fine. For a limited random number of sites, I am still able to access. I tried Torrenting and it still works too.
I have a 360 elite and a wireless adapter i just recently got for the 360, every time go to use media center I can get to some media and push "A" on my controller and locks up freezes then shows up with "Connection Failure:The Xbox 360 could not connect to the Windows Media Center PC. Turn your Xbox 360 off then on again, and try to connect again." when its connected through the wireless adapter. I'm running home premium 64 bit windows 7.
What I would like to do is to be able to access all of my music and videos from my computer and external hard drive, on my Xbox, through my router. I am using the Microsoft Security Essentials antivirus and firewall, and no third party antivirus/antispyware or firewall programs.I have an Xbox 360 Elite, not one of the new wireless versions. I went into HomeGroup on my computer and checked 'share media with devices' and also checked music, pictures, and videos. So far I can play music on the Xbox by going to the music app and choosing my PC. The problem is, I can only play songs that are directly in the Music folder on my computer. And only certain songs at that, I'm not sure why. I have a subfolder within Music called Full Albums and I cannot play ANYthing in that subfolder. What am I missing?Also, is it possible to access music and videos on my external hard drive? Provided my external hard drive is connected to my computer of course.Lastly, I can't access anything unless I disable Windows Firewall. How do I set up an exception for the Xbox so that I don't have to disable the firewall every time I want to do this?
i am having an issue with media center through my Xbox 360 i am using a VGA cable to my Xbox and running it through a monitor everything is fine when i'm playing games and what not but when i open media center it has weird lines across the screen i have tried everything i can think of, i changed the resolution and it didn't have lines but obviously the picture wasn't quite right, change the resolution back to normal and the lines come back.
Whenever I press the media button on my remote, my Xbox starts up. Is there anyway I can stop that short of putting some tape over the IR receiver on the Xbox when I'm not using it?
I'm so tired of this error that I could I throw my computer down the window. So the thing is I'm trying to share my mobile connection from my computer to my xbox (which has worked before without any problems) but now when I click on properties on my mobile connection on the share tab to check the "allow sharing" box this error: 0x80004005 along with "undefined error" comes up. How I could want to share mobile connection to the xbox when it's only going to lag, it will not, it works like a dream when it chooses to work..
I have windows 7 on my computer, I got on my xbox 360 and setup the windows media center app on it about 4 monthes ago. I didn't have many problems at first for about a month. I always used it for movies and videos. The problems started slow at first a video might lag a little bit and buffer a couple of times, but I would restart my xbox 360 and it seemed to fix the problem until the next time. Now I have gotten to the point where everytime I exit windows media center or turn off my computer or xbox, I literally have to uninstall the xbox extender everytime and reinstall just to watch movies and videos, because if I don't, I will have an error saying the xbox can't find my pc and when I get on my pc wmc and go to the extender page it shows the xbox but says and don't guote me dont know for sure but it says something like xbox available but not ready or something like that. It will also have the yellow yield sign looking deal. Anyways when I uninstall and resetup wmc for the xbox it will work again only when I go to watch my videos in the videos section it lags real bad and during the video it wont say buffering but it acts like it is.
My xbox has been connected as a media center extender to this computer and router combination for several months now. The router is a Buffalo WZR-HP-G300NH. Earlier this week the media center extender was having trouble playing back video. After a restart of the computer the extender was no longer connected.When I try to add a new extender I get the message "Cannot add extender". Microsoft says to enable upnp and multicast. Check. Reflashed firmware to dd-wrt. No luck. Flash back to buffalo firmware. No luck. Try an old Linksys WRT54GL I have lying around. No Luck.The event logger has this error: "Media Center Extender Setup failed as the Extender was detected on the network but the UPnP search for the Extender failed (timed out after 20000ms)." Event ID: 538 Now I've done everything I could find about enabling network discovery, allowing anything to access media and such. Network and sharing is set pretty much wide open. I've also tried switching between home and work networks.With that said, I decided to check and see what updates have been installed. It turns out that an update was applied on the day I started having problems. It says it cannot be uninstalled. Description of the Windows 7 and Windows Server 2008 R2 installation software feature update Note: I do not have system restore points. Small SSD and didn't take the time to figure out how to save them elsewhere.
i am having problems connecting to Xbox live because it has no internet access and i have tried lots of things and nothing is working. here is the story behind it.... i had tried connecting many times before but it wouldn't work but one day i tried and i changed sharing on something (IDK what i forgot) and it worked so i had live for a couple of days. then one day my bro was online and the power went out in the house for a while, the next day i tried to connect and it wouldn't... on the when i plug in xbox ethernet to computer
