Media Centre TV Crashing When Paused
Sep 22, 2011
I have with Windows Media Centre while watching TV on my Computer. I have an inboard Gigabyte GA-PTV-TAF-RH Hybrid TV card and am running it in my 64bit Windows 7 Pro. WMC picks up all the TV channels and works well until I click the pause button. I then lose all picture and when I unpause there is only sound until I pause/unpause again, then I lose sound as well and WMC crashes with the error message "WMC has stopped working". When I restart all is fine until I pause again, and then I have the same problem.Windows tells me all my Drivers are up to date and working so I don't know what is causing this problem.
View 3 Replies
ADVERTISEMENT
Mar 20, 2011
Having recorded a TV programme last night on my computer running Windows 7 using Media Centre, I want to burn this prog to DVD to keep it. Why does Media Centre tell me the there is not enough room on the DVD (4,7 gig) to record a programme which is only 2 gig in size? It offers to do it at reduced quality and warns it may take several hours - anyone know why this is and if there is better sodtware out there to do this job.
View 2 Replies
View Related
Sep 23, 2011
message says media centre stopped working
View 1 Replies
View Related
Nov 9, 2011
my problem is that Windows media centre will not allow me to open any programmes it seems to have taken over as my default, I have tried going in to control panel, programmes, to turn off windows features but as soon as i do up pops windows media centre, I have tried removing windows media centre but cant find it on un-install programmes, most of my desk top programmes have the windows media centre icon on them like it must be that which opens them.
View 1 Replies
View Related
Feb 7, 2012
Windows Media Centre keeps opening up all the time, every few minutes or so. But it's always if I'm doing something. Just closed a program? Windows Media Centre opens. Just saved something? Windows Media Centre opens. Minimizing Firefox to get ready to open something else? You guessed it.But if the computer is idle it won't happen. There is also nothing else apparently wrong with the computer.I never use Windows Media Centre so I wouldn't even mind getting rid of it but I don't know if Windows Media Player relies on it which I do use for certain video formats from time to time. So unless someone says otherwise, I'd rather just disable it as opposed to removing it.
View 2 Replies
View Related
Aug 15, 2009
I am currently using Windows 7 X64. My wife recently purchased me an Xbox 360 Elite for my birthday, but I am having some problems setting it up as a media extender. (to put it mildly)When I go into Windows Media Centre I can immediately see the Xbox with an option to configure, so I jump through the hoops and enter the number from the Xbox into Windows media Centre. I then get the message:Configuration ErrorAn error was encountered while configuring your computer for use with this extenderI have followed the steps at
View 9 Replies
View Related
Oct 31, 2011
I have suddenly found that media centre when opening live tv i have the sound but no vision. It displays the progress bar OK and you can can even display the active thumbnail when you left click progress tracker,but just black full screen,i have all latest drivers for sound and graphics.I have reloaded direct x and codec drivers ,tried retuning ,tried resetting monitor,all to no avail.My system OS is w7 x64 ,CPU 6600 O/C 2.4 GHz, GPU NV GTX460.4MB Ram.
View 5 Replies
View Related
Dec 2, 2009
Can anyone explain what I need to do with this error message in order to be able to use Media Centre for live TV.
"Files needed to display video are not installed or are not working correctly. Restart windows media centre or restart the computer".
I have an analog cable plugged into my new TV card (Its an older PC, Dell Dimension 3100) and I can see the TV channels using Win TV 7 that came with the card.
Windows Media wont even play its own sample video without giving me the above error message.
View 2 Replies
View Related
Oct 2, 2012
So, time to take a couple steps back and slow things down a bit here... I'm currently in the planning stages of a low-budget media centre / network storage setup and I'm hoping to glean some knowledge from some of you more experienced overclockers before I go wasting money on things I don't need.The reason I decided to post here and not in the general or media sub-forums is because of how I want to go about this. Part of my plan involves taking a decent spec system and underclock the **** out of it.... Or, at least just underclock it enough for a fanless setup. Firstly, the media centre itself is a low-cost project... So the obvious OS choice here is Linux. But, which one...? It doesn't need to have any fancy GUI or "user friendly" features. At boot, the OS itself will go straight into whichever media centre software I settle on (XBMC, MythBuntu, etc. etc.), with other services starting up silently in the background (nginx / Apache, MySQL, Samba, Webmin, etc. etc.).Everybody in my household are avid Android users (yay), so the box will most likely be controlled directly from our phones or tablets. I mean, seriously, can you name one true computer geek that wouldn't grin from ear to ear while they tell their friends how their TV remote is actually a 7" multitouch, dual-core, Android tablet...?
What sort of hardware would I need for this setup? Here's the first idea that comes to mind:1.4 to 1.8GHz dual core 1 to 2GB DDR2-PC6400 40 to 80GB OS drive Multiple 1 or 2TB 'green' drives Low profile GPU (s-video for now, HDMI can come later) Either completely fanless, or mostly fanless with a single 200mm fan at low speed for good airflow I may possibly build my own case from the ground up.I'm hoping to get this all running from the start with nothing larger than a 300w to 350w PSU if possible, perhaps even one of those funny L-shaped midget PSUs from an old Dell desktop? I'm sure many of you here are old enough to know which ones I'm talking about.. Heck, those things came with nothing more than a 40mm or 50mm fan if I remember correctly.What hardware would you guys use for a system like this? Fire away, I like constructive criticism.
View 1 Replies
View Related
Oct 31, 2009
I've got two nice little 1680 x 1050 20.1" Dell S-IPS monitors, which are de-facto 16:10 units, mounted on an Ergotron stand, with the intention of using one for television and the other for computing purp's.My Graphics card is a capable Palit HD4850 Sonic with dual DVI outputs. It's also got an S-Video output which isn't in use.What I would like to do is run WMC maximised on one monitor, with TV there as and when I wish to view anything, and naturally I wish to use this screen maximised (the only issue in WMC is that there is a limitation of either choosing 4:3 or 16:9 ratio output, and not 16:10).However when I connect both monitors vai DVI output Windows7 locks my cursor in the maximised TV screen and I then cannot control the primary PC monitor whatsoever - which is somewhat of a complete farce, and is an extremely dissappointing result!Accordingly I have to drag the WMC display to get the 16:9 output to 'almost' fill the 16:10 monitor, and then face the annoyance of the cursor drifting to that screen from my PC monitor from time to time (I can happily live with a band to allow for the 16:9 ~ 16:10 hardware differential... but not this ridiculous loss of cursor control!)Question is this... why does my cursor focus get restricted to one screen if the Windows Media Centre is maximised? The whole point of having dual-monitors is being able to use both of them at once of course.I've tried with the ATi driver alone, and with the Catalyst suite loaded, with no differences to the issue.My monitors also have an S-Video input, but I've not got an S-Video cable to hand right now - however... if I were to use S-Video for one monitor would I avoid the 'locked in cursor' problem?
View 9 Replies
View Related
May 12, 2012
In the old place my PC was upstairs but had an ethernet connection to the router downstairs.In the new place I have to run it on the wireless. I have got a 2/3 bar connection to the router, and can stream to the Xbox without a problem, for the most part.The problem occurs (and it's becoming more regular) when I turn both bits of kit on and the PC (in the media centre menu) says the Xbox is connected but the Xbox says no connection can be found.It then lists the normal helpful suggestions, and what I have to eventually do is unlink them and re build the connection.When that is back, it works fine, but turn them off and have to start all over again.
View 1 Replies
View Related
Nov 9, 2009
is there any way to increase the buffer size i don't know whether this should be done on the computer or on the xbox i think it is the xbox as they seem to play ok on the computer.
when i play the avi's it seems as if only about 5 - 10 seconds is buffered then it plays then stutters then plays and so on .
View 1 Replies
View Related
Dec 1, 2011
I've just upgraded my Media Centre from Vista x64 to Windows 7 x64.Previously when watching recorded TV I could use the skip fwd/back buttons on my remote &/or keyboard to skip fwd 30 secs, or back 7 seconds; however this no longer works. They do however work perfectly when watching/listening to Movies/Music.The on screen skip buttons still perform the same task (fwd 30s, back 7s).Reading other forum posts I gather this is because the skip buttons are looking for the next track and by its nature recorded TV doesn't have any tracks.Is there a way of editing the registry to reprogram the buttons to skip fwd a specified time frame when watching recorded TV? I'm using a logitech dinovo edge keyboard for which I've installed the latest drivers. I also use my iPhone with JumiMouse as a Remote and a Hauppage TV Tuner Remote, all the above have the same problem.
View 1 Replies
View Related
Dec 22, 2011
I am sure that there is an answer to this, but am lost... I have about 28,000 songs which are stored on my Windows 7 Enterprise Media Centre PC. All the ID3 tags are correct (I think), but I cant get the music library working properly on the PC or Extender.The problem I have is with my Various Artists albums... the ID3 tags show song title, artist and album artist. on a various artist album the Album Artist field is set to "Various Artists". I am using an Xbox360 media extended in my living room and whilst its slow, thats a seperate issue, there are some unexpected results when searching for songs...If you search for an artist, if they have produced albums where they are the only artist, then they are listed - the ID3 tags on their personal albums have the Album Artist field set as the Artist field and all works. However when listing by Artist, there is an artist listed called "Various Artists" and every song (12,000+) which is on a compilation album is listed as being by "Various Artists" as MC seems to get the artist name from the "Album Artist" field rather than from the "Artist" field.
I thought I'd found a workaround by changing the Album Artist field to be the same as the Artist - indeed this did work, but the unexpected side effect is that when you search by album, because each track on an album shows a different Album Artist set in the ID3 tag, it lists the album seperately for every song... so you may have "Now Thats What I Call Music xx" listed 20 times - once per song!Is there any way to get media centre to catalogue songs using the "Artist" field rather than the "Album Artist" field - but also to take into account that even though songs are by different artists, should the Album Artist all be the same - then to treat as a single album??I have only just started researching this and have read a bit about Media Centre using the catalogue created by WMP - but to be honest I have never used WMP and wouldnt know where to start.
View 1 Replies
View Related
Feb 8, 2009
I have Asus 4550 video card The drivers are crashing in MCE very frequently ( Black screen and then BSOD and instant reboot so I can't even read the error) I tried driver that was optional in Windows 7 update, Catalyst 8.12, 9.1 and Windows 7 beta - they all behave the same way .
Any ideas ?
View 1 Replies
View Related
Apr 13, 2011
my windows 7 security center will not start up dose any have a solution
View 1 Replies
View Related
Apr 4, 2012
My computer has stopped working due to errors. At the moment I have Catalyst control Host application has stopped working message two times and then goes away. I have only recycle bin icon on my desk top and on bottom bar skype, internet, and hp icon. I can work on internet but everything else is empty? My computer is HP Notebook G62 and is 14 months old?
View 3 Replies
View Related
Sep 9, 2012
Is this invasion of privacy?
View 6 Replies
View Related
Jul 21, 2011
I am puzzled by a recent development that keeps making the Action Centre icon come and go in the Notification area. I have set it to be continually present and seen in this area but it goes "walkabout" from time to time.
View 3 Replies
View Related
Feb 2, 2012
I have a new Elitebook 8460p and when installing my officejet 4580p it did not install HP solution centre as it did with my previous computer. Result I cannot scan any more with my all-in-one-printer.I have been looking on the internet for the HP solution centre software for Windows 7 (64bit) but I don't seem to find it. I am always refered to the HP website but Windows 7 (64Bit) does not show me a download for solution centre. Where can i find the necessary software to operate my printer as I did with XP?
View 10 Replies
View Related
Jun 2, 2012
installed hp printer on windows 7 from hp driver web site hp solution unable to open messagae says installion incomplete this is not so.
View 1 Replies
View Related
Apr 5, 2011
I use norton anti virous soft. When I turn on my laptop, I saw an important meassage from windows action center that in my laptop the windows security center is off. Is it a problem? If yes how can i solve it? I use windows 7 OS and corei3 processor.
View 2 Replies
View Related
Oct 19, 2011
how can i download audio driver for ibm think centre windows 7
View 1 Replies
View Related
Sep 22, 2012
How do i fix the catalyst control centre host it has stopped workinf
View 1 Replies
View Related
Aug 31, 2011
catalyst control centre message appears saying it stopped working
View 2 Replies
View Related
Jun 1, 2012
problem is that when i start up my computer i get a box that pops up twice which says ''Catalyst Control Centre: host application has stopped working...windows can check online for a solution to the problem....now ive run 'Driver Genius' to update all drivers but the boxes still pop up, it doesent seem to be affecting the computer in anyway but its kinda annoying
View 2 Replies
View Related
Nov 28, 2012
I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
View 5 Replies
View Related
Dec 22, 2010
How can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.
View 9 Replies
View Related
Jan 18, 2011
How to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies
View Related
Jul 25, 2011
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies
View Related
Jan 15, 2009
I have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?
View 5 Replies
View Related
