Windows Media Centre keeps opening up all the time, every few minutes or so. But it's always if I'm doing something. Just closed a program? Windows Media Centre opens. Just saved something? Windows Media Centre opens. Minimizing Firefox to get ready to open something else? You guessed it.But if the computer is idle it won't happen. There is also nothing else apparently wrong with the computer.I never use Windows Media Centre so I wouldn't even mind getting rid of it but I don't know if Windows Media Player relies on it which I do use for certain video formats from time to time. So unless someone says otherwise, I'd rather just disable it as opposed to removing it.
my problem is that Windows media centre will not allow me to open any programmes it seems to have taken over as my default, I have tried going in to control panel, programmes, to turn off windows features but as soon as i do up pops windows media centre, I have tried removing windows media centre but cant find it on un-install programmes, most of my desk top programmes have the windows media centre icon on them like it must be that which opens them.
I've got two nice little 1680 x 1050 20.1" Dell S-IPS monitors, which are de-facto 16:10 units, mounted on an Ergotron stand, with the intention of using one for television and the other for computing purp's.My Graphics card is a capable Palit HD4850 Sonic with dual DVI outputs. It's also got an S-Video output which isn't in use.What I would like to do is run WMC maximised on one monitor, with TV there as and when I wish to view anything, and naturally I wish to use this screen maximised (the only issue in WMC is that there is a limitation of either choosing 4:3 or 16:9 ratio output, and not 16:10).However when I connect both monitors vai DVI output Windows7 locks my cursor in the maximised TV screen and I then cannot control the primary PC monitor whatsoever - which is somewhat of a complete farce, and is an extremely dissappointing result!Accordingly I have to drag the WMC display to get the 16:9 output to 'almost' fill the 16:10 monitor, and then face the annoyance of the cursor drifting to that screen from my PC monitor from time to time (I can happily live with a band to allow for the 16:9 ~ 16:10 hardware differential... but not this ridiculous loss of cursor control!)Question is this... why does my cursor focus get restricted to one screen if the Windows Media Centre is maximised? The whole point of having dual-monitors is being able to use both of them at once of course.I've tried with the ATi driver alone, and with the Catalyst suite loaded, with no differences to the issue.My monitors also have an S-Video input, but I've not got an S-Video cable to hand right now - however... if I were to use S-Video for one monitor would I avoid the 'locked in cursor' problem?
In the old place my PC was upstairs but had an ethernet connection to the router downstairs.In the new place I have to run it on the wireless. I have got a 2/3 bar connection to the router, and can stream to the Xbox without a problem, for the most part.The problem occurs (and it's becoming more regular) when I turn both bits of kit on and the PC (in the media centre menu) says the Xbox is connected but the Xbox says no connection can be found.It then lists the normal helpful suggestions, and what I have to eventually do is unlink them and re build the connection.When that is back, it works fine, but turn them off and have to start all over again.
Having recorded a TV programme last night on my computer running Windows 7 using Media Centre, I want to burn this prog to DVD to keep it. Why does Media Centre tell me the there is not enough room on the DVD (4,7 gig) to record a programme which is only 2 gig in size? It offers to do it at reduced quality and warns it may take several hours - anyone know why this is and if there is better sodtware out there to do this job.
I have with Windows Media Centre while watching TV on my Computer. I have an inboard Gigabyte GA-PTV-TAF-RH Hybrid TV card and am running it in my 64bit Windows 7 Pro. WMC picks up all the TV channels and works well until I click the pause button. I then lose all picture and when I unpause there is only sound until I pause/unpause again, then I lose sound as well and WMC crashes with the error message "WMC has stopped working". When I restart all is fine until I pause again, and then I have the same problem.Windows tells me all my Drivers are up to date and working so I don't know what is causing this problem.
I am currently using Windows 7 X64. My wife recently purchased me an Xbox 360 Elite for my birthday, but I am having some problems setting it up as a media extender. (to put it mildly)When I go into Windows Media Centre I can immediately see the Xbox with an option to configure, so I jump through the hoops and enter the number from the Xbox into Windows media Centre. I then get the message:Configuration ErrorAn error was encountered while configuring your computer for use with this extenderI have followed the steps at
I have suddenly found that media centre when opening live tv i have the sound but no vision. It displays the progress bar OK and you can can even display the active thumbnail when you left click progress tracker,but just black full screen,i have all latest drivers for sound and graphics.I have reloaded direct x and codec drivers ,tried retuning ,tried resetting monitor,all to no avail.My system OS is w7 x64 ,CPU 6600 O/C 2.4 GHz, GPU NV GTX460.4MB Ram.
Can anyone explain what I need to do with this error message in order to be able to use Media Centre for live TV.
"Files needed to display video are not installed or are not working correctly. Restart windows media centre or restart the computer".
I have an analog cable plugged into my new TV card (Its an older PC, Dell Dimension 3100) and I can see the TV channels using Win TV 7 that came with the card.
Windows Media wont even play its own sample video without giving me the above error message.
So, time to take a couple steps back and slow things down a bit here... I'm currently in the planning stages of a low-budget media centre / network storage setup and I'm hoping to glean some knowledge from some of you more experienced overclockers before I go wasting money on things I don't need.The reason I decided to post here and not in the general or media sub-forums is because of how I want to go about this. Part of my plan involves taking a decent spec system and underclock the **** out of it.... Or, at least just underclock it enough for a fanless setup. Firstly, the media centre itself is a low-cost project... So the obvious OS choice here is Linux. But, which one...? It doesn't need to have any fancy GUI or "user friendly" features. At boot, the OS itself will go straight into whichever media centre software I settle on (XBMC, MythBuntu, etc. etc.), with other services starting up silently in the background (nginx / Apache, MySQL, Samba, Webmin, etc. etc.).Everybody in my household are avid Android users (yay), so the box will most likely be controlled directly from our phones or tablets. I mean, seriously, can you name one true computer geek that wouldn't grin from ear to ear while they tell their friends how their TV remote is actually a 7" multitouch, dual-core, Android tablet...?
What sort of hardware would I need for this setup? Here's the first idea that comes to mind:1.4 to 1.8GHz dual core 1 to 2GB DDR2-PC6400 40 to 80GB OS drive Multiple 1 or 2TB 'green' drives Low profile GPU (s-video for now, HDMI can come later) Either completely fanless, or mostly fanless with a single 200mm fan at low speed for good airflow I may possibly build my own case from the ground up.I'm hoping to get this all running from the start with nothing larger than a 300w to 350w PSU if possible, perhaps even one of those funny L-shaped midget PSUs from an old Dell desktop? I'm sure many of you here are old enough to know which ones I'm talking about.. Heck, those things came with nothing more than a 40mm or 50mm fan if I remember correctly.What hardware would you guys use for a system like this? Fire away, I like constructive criticism.
is there any way to increase the buffer size i don't know whether this should be done on the computer or on the xbox i think it is the xbox as they seem to play ok on the computer.
when i play the avi's it seems as if only about 5 - 10 seconds is buffered then it plays then stutters then plays and so on .
I've just upgraded my Media Centre from Vista x64 to Windows 7 x64.Previously when watching recorded TV I could use the skip fwd/back buttons on my remote &/or keyboard to skip fwd 30 secs, or back 7 seconds; however this no longer works. They do however work perfectly when watching/listening to Movies/Music.The on screen skip buttons still perform the same task (fwd 30s, back 7s).Reading other forum posts I gather this is because the skip buttons are looking for the next track and by its nature recorded TV doesn't have any tracks.Is there a way of editing the registry to reprogram the buttons to skip fwd a specified time frame when watching recorded TV? I'm using a logitech dinovo edge keyboard for which I've installed the latest drivers. I also use my iPhone with JumiMouse as a Remote and a Hauppage TV Tuner Remote, all the above have the same problem.
I am sure that there is an answer to this, but am lost... I have about 28,000 songs which are stored on my Windows 7 Enterprise Media Centre PC. All the ID3 tags are correct (I think), but I cant get the music library working properly on the PC or Extender.The problem I have is with my Various Artists albums... the ID3 tags show song title, artist and album artist. on a various artist album the Album Artist field is set to "Various Artists". I am using an Xbox360 media extended in my living room and whilst its slow, thats a seperate issue, there are some unexpected results when searching for songs...If you search for an artist, if they have produced albums where they are the only artist, then they are listed - the ID3 tags on their personal albums have the Album Artist field set as the Artist field and all works. However when listing by Artist, there is an artist listed called "Various Artists" and every song (12,000+) which is on a compilation album is listed as being by "Various Artists" as MC seems to get the artist name from the "Album Artist" field rather than from the "Artist" field.
I thought I'd found a workaround by changing the Album Artist field to be the same as the Artist - indeed this did work, but the unexpected side effect is that when you search by album, because each track on an album shows a different Album Artist set in the ID3 tag, it lists the album seperately for every song... so you may have "Now Thats What I Call Music xx" listed 20 times - once per song!Is there any way to get media centre to catalogue songs using the "Artist" field rather than the "Album Artist" field - but also to take into account that even though songs are by different artists, should the Album Artist all be the same - then to treat as a single album??I have only just started researching this and have read a bit about Media Centre using the catalogue created by WMP - but to be honest I have never used WMP and wouldnt know where to start.
I'm having problems with windows media player on windows 7. I've now had 4 fresh installs of 7 since its release (4 too many?) and every time i get the same wmp problem its either wmplayer.exe or the sharing service using 25%. I've disabled the media sharing service and disabled it in services window so it no longer runs, I only have one directory in wmp which is D:music on a separate drive from the OS no image or video libraries. Windows search indexer is also gone due to the total i/o causing a real slow system
All the download media info and other settings are disabled too, windows media player should just literally play my music and no more however this does not seem the case, it is also seems to be permanently trying to update my media library which it has done on all 4 installs too. Iremember having this problem too on XP MCE ? I am not sure if I have left any info out but basically I have tried everything I can so far and WMP will always uses 25% of my cpu even after its closed I usually have to kill the process manually.
System specs: OS: Windows 7 SP1 64bit CPU: Athlon II x4 640 RAM: 1x2GB DDR3 (667Mhz) HD: 2x500GB SATA II 7200RPM Audio: SoundBlaster X-FI Video: Radeon HD 4670 music folder size : 69.2GB
I thought I had either a virus or malware. Boopme was nice enough to rule those out.security forum thread I'm contemplating doing a clean install of windows 7.
When I click on its icon I get a brief flash of Media guide, but it is immediatelly supplanted by a blue on-line stores and I cannot therefore open the Guide.How can I stop this?
i was downloading a film and accicdently sent a file to open using WMP, now all my programs have gone wrong. int explorer,google chrome, AVG, chess titans etc everything is now trying to open in WMP. I've checked properties and all the target types have changed to WMP, have not got a clue what ive done. ive tried using REGEDIT but this also tries to open in WMP. ive downoaded reg fix for windows 7 but this hasnt worked either. ive done a bit of research on the web for similar problems but none of the solutions seem to be working for me. i am able open int explorer by going to 'open with' which i was not able to do before, but this just changes all the icons to int explorer.
i dont want to have to reboot because ive never done it before and i dont have a back up for the operating systems.
Ok, I'm trying to watch my CBT Nugget videos for CCNA as I have been this week. I watch them on my desktop, which has a locally attached external HD with the videos sitting on there. I come to my laptop and access the external on my desktop via network share. This has been working pretty much all week long, until today.Now, when I try even playing 1 file, without trying to add them all to a playlist, it opens and it starts playing, but it crashes as shown above.
i am using windows 7 ultimate x86. if i tried to open any installed programs then it opens windows media center only. please resolve this issue as soon as early.
Have a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
I have a new Elitebook 8460p and when installing my officejet 4580p it did not install HP solution centre as it did with my previous computer. Result I cannot scan any more with my all-in-one-printer.I have been looking on the internet for the HP solution centre software for Windows 7 (64bit) but I don't seem to find it. I am always refered to the HP website but Windows 7 (64Bit) does not show me a download for solution centre. Where can i find the necessary software to operate my printer as I did with XP?
I use norton anti virous soft. When I turn on my laptop, I saw an important meassage from windows action center that in my laptop the windows security center is off. Is it a problem? If yes how can i solve it? I use windows 7 OS and corei3 processor.