Windows Media Not Opening Guide
Mar 22, 2011When I click on its icon I get a brief flash of Media guide, but it is immediatelly supplanted by a blue on-line stores and I cannot therefore open the Guide.How can I stop this?
View 8 RepliesWhen I click on its icon I get a brief flash of Media guide, but it is immediatelly supplanted by a blue on-line stores and I cannot therefore open the Guide.How can I stop this?
View 8 RepliesWindows 7 has some fine in-built diagnostic tools to help you troubleshoot Windows Media Player issues, which you may be facing. This tutorial will give you some steps to fix common problem you might encounter with Windows Media Player 12.
View 0 Replies View RelatedI recently purchased a Leadtek DTV2000 H Plus TV tuner card. The card has many cool features, and is supplied with software from Leadtek.
I have managed to configure Media Center for the new card, however whilst I am using Media Center with my new card I am not able to access any program guides, to see what other channels are showing, determine what I want to watch next, etc.
Program guide information is displayed when I use the Leadtek software, just not when I am using Media Center.
If anybody has any suggestions on how to enable program guide information in Media Center it will be greatly appreciated.
Windows media player stuck on opening media
View 1 Replies View Relatedmy windows media player not opening and i already reinstall everything.
View 1 Replies View RelatedWindows Media Centre keeps opening up all the time, every few minutes or so. But it's always if I'm doing something. Just closed a program? Windows Media Centre opens. Just saved something? Windows Media Centre opens. Minimizing Firefox to get ready to open something else? You guessed it.But if the computer is idle it won't happen. There is also nothing else apparently wrong with the computer.I never use Windows Media Centre so I wouldn't even mind getting rid of it but I don't know if Windows Media Player relies on it which I do use for certain video formats from time to time. So unless someone says otherwise, I'd rather just disable it as opposed to removing it.
View 2 Replies View Relatedi was downloading a film and accicdently sent a file to open using WMP, now all my programs have gone wrong. int explorer,google chrome, AVG, chess titans etc everything is now trying to open in WMP. I've checked properties and all the target types have changed to WMP, have not got a clue what ive done. ive tried using REGEDIT but this also tries to open in WMP. ive downoaded reg fix for windows 7 but this hasnt worked either. ive done a bit of research on the web for similar problems but none of the solutions seem to be working for me. i am able open int explorer by going to 'open with' which i was not able to do before, but this just changes all the icons to int explorer.
i dont want to have to reboot because ive never done it before and i dont have a back up for the operating systems.
Ok, I'm trying to watch my CBT Nugget videos for CCNA as I have been this week. I watch them on my desktop, which has a locally attached external HD with the videos sitting on there. I come to my laptop and access the external on my desktop via network share. This has been working pretty much all week long, until today.Now, when I try even playing 1 file, without trying to add them all to a playlist, it opens and it starts playing, but it crashes as shown above.
View 1 Replies View Relatedi am using windows 7 ultimate x86. if i tried to open any installed programs then it opens windows media center only. please resolve this issue as soon as early.
View 1 Replies View RelatedHave a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
View 3 Replies View RelatedE ach time When I am opening my current windows Media Player for Windows 7 rofessional which is my opertaing system, the WMP freezes.
View 2 Replies View RelatedI've put together a guide to updating and finding drivers in my sig - hope it helps!
View 2 Replies View RelatedI know that is a horrible Title for this post, but I'm really not sure what to call it exactly. The left part of the window that opens when attaching files to an email is gone, as shown in the picture below. Anyone know why this would be happening? The left portion, notice how the C:/ D:/ nothing is there.
View 3 Replies View RelatedId there a set of instructions or a guide online that will help me take an iSO and put it on a USB drive for installation now and for the future?
I just got a 32gig USB card and want to make an XP, Vista, and Windows 7 Install disk (or USB)
A simple guide to a successful in-place upgrade
You have most likely heard that a clean (custom) install is the preferred install method when migrating to Windows 7. That is most certainly true. However, there are situations when in-place upgrade is more practical method to use. Tens, maybe hundreds of gigs software installed, no install media found for the software and so on.
You might have heard horror stories about non-working Seven and how it’s all in-place upgrade’s fault, or how an in-place leaves so much unwanted and not used pieces and bits it seriously puts your system in danger, at least making it slow. Most of these horror stories come from two types of users, those who have never done a Vista to Seven in-place upgrade but have heard third hand information and rumours, and those who have not prepared installation as it should be prepared.
I have done a lot of in-place upgrades, both from XP to Vista and lately from Vista to Seven. I have even successfully tried a one-session XP to Seven via Vista in-place upgrade (in-place XP to Vista, installing service packs and drivers and then directly in-place further to Seven), to show some colleagues how to do a safe and working upgrade. I have never encountered any upgrade related problems; I do have had my share of installation problems and issues but I’ve always found out that after failing to do an in-place upgrade, the same issue has occurred also after a clean install. Most often the reason is non-compatible hardware. You cannot blame in-place if your hardware refuses to work with Seven.
First, let’s take a look at the chart about in-place options:
As you can see it is not possible to "downgrade when upgrading" i.e. you cannot in-place upgrade from for example Vista Ultimate to Seven Home Premium. You need to have the same or better edition (notice that you can in-place upgrade to Seven Professional only from Vista Business). Your current Vista needs at least service pack 1 to be able to upgrade to Seven.
Notice please: You can only in-place upgrade to Windows 7 from Vista. Older Windows versions (XP, 2000 etc.) can not be in-place upgraded to Seven You cannot in-place upgrade a 32-bit Vista to a 64-bit Seven or 64-bit Vista to a 32-bit Seven The language versions have to match, you can in-place upgrade an English Vista only with an English Seven.
So, let’s start. This guide will show you how to prepare and do an in-place upgrade from Vista to Seven. Following these steps you are most likely to get it right first time.
1. Check the compatibility issues
Download and run Windows 7 Upgrade Advisor Follow any instructions given Uninstall all incompatible software, update drivers and software if Advisor tells so
2. Prepare your system
Update (flash) your system BIOS to most current version After flashing BIOS, restore it to factory defaults 3. Prepare your software setup.
Uninstall all applications and software you never use or which is expired (test and trial versions, software you know you are never going to use like the game you tested but didn’t like etc.) Update AV and Firewall software to the most current versions, including virus definitions Turn off AV, Firewall and all malware software. Remember to turn them on again after installation is finished Check and run Windows Update until it tells you Vista is up to date Clean up your system deleting all unnecessary files like temp folders etc. Backup your system 4. Prepare your hardware setup.
Check Device Manager to assure all devices are working Disconnect all external devices, leave only the main display, mouse and keyboard If upgrading a laptop, be sure it is connected to an AC power source. That’s it. Insert the install media and start doing an in-place upgrade. Please notice this is the most boring part of the process; an in-place upgrade can take hours.
An in-place upgrade can easily take longer than doing a clean install and re-installing all the software. If you don't have too much personal files to transfer, only have a limited amount of applications to re-install and if you have all install media, I recommend doing a clean install. Remember though there's nothing wrong doing an in-place upgrade. It works well and fine when done right.
I've searched on various forums and have had mixed results from years of this similar problem arising on XP and Vista as well. My Media Center no longer updates the program guide, making media center essentially useless. I've tried re-setting it like others suggested, but now it gets stuck at "Downloading TV Setup Data".
Everytime I try to access the program guide, it pops up a message saying my list is expired and needs to be updated, but it never actually updates. My internet connection is fine, the system is fine. Nothing has changed to potentially cause this conflict to arise. Is this a problem Microsoft has addressed or? Any help on fixing this would be appreciated, as I rely on MC to act as a DVR.
Dinesh's Complete Internet Troubleshooting Guide.
View 0 Replies View RelatedHow to troubleshoot computer internetworking, the right way ?
View 0 Replies View RelatedI have
-Windows 7
-FireFox 3.5.6
-IDM 5.18
This error appears when I try to download any file.
Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.
As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.
This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.
There is a Simple way around this Block.
Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter") Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.
Hadn't opened Media Center for awhile, though the last time I did, everything worked fine. Internet TV Program Guide now lists some new Classic shows and I thought it would be cool to watch some old I Love Lucy... but nothing. And no other show opened either. Not one. Click on it and it makes that sound... but then nothing happens. Its not crucial, I can live without old reruns of I Love Lucy, but it bugs me that the program is not working as it should.I already re- ran set-up again 3 times. I read in some other thread about TunerFree MCE and I downloaded that, and it works fine. (Now I have access to hundreds of shows from all over the world I'll probably never watch!) But it obviously does not fix my problem. Most of the shows that are supposed to be available in the Program Guide I'm not even interested, but all of them used to open easily, no problem. So I'd like to be able to watch the ones I want.I have not tried to re-install Windows 7. Wasn't the hassle if I screwed something up. But I did update Silverlight, and that didn't do anything either.
Also, I no longer even have an icon for Internet TV, and I swear I did! Now there's just Recorded TV and Program Guide. I download anything I want to watch, either hours or days after it airs, so I don't have cable or any TV service, nor a TV tuner in my laptop. But downloading is time consuming, and takes up room on my hard drive, if I don't watch things right away, so I would love to be able to access Internet TV.There also used to be an whole section of documentaries that aren't there any more. I did already watch most of them, and I loved them. But that entire section is gone now. I think it might have been in Extras Gallery, but I'm not sure. All new weird stuff that also won't open is in there now.
Why is it when I log out of my hotmail account I redirected to open DNS guide? With HMI TWW MSN Logout in the search menu.
View 1 Replies View RelatedThe word document is opening in Windows xp why not opening properly in windows 7
View 2 Replies View Relatedjust bought a kodak mini camera, how can i download the user guide. the info that came with the camera is no good and does not tell you how to use it.
View 5 Replies View RelatedHow can I get a copy of the packard bell ixtreme m3720 guide?
View 3 Replies View Related,opening any icon , opening default programming
View 1 Replies View RelatedHow can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.
View 9 Replies View RelatedHow to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies View RelatedI have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
View 5 Replies View RelatedI'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies View RelatedI have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?