You have most likely heard that a clean (custom) install is the preferred install method when migrating to Windows 7. That is most certainly true. However, there are situations when in-place upgrade is more practical method to use. Tens, maybe hundreds of gigs software installed, no install media found for the software and so on.
You might have heard horror stories about non-working Seven and how it’s all in-place upgrade’s fault, or how an in-place leaves so much unwanted and not used pieces and bits it seriously puts your system in danger, at least making it slow. Most of these horror stories come from two types of users, those who have never done a Vista to Seven in-place upgrade but have heard third hand information and rumours, and those who have not prepared installation as it should be prepared.
I have done a lot of in-place upgrades, both from XP to Vista and lately from Vista to Seven. I have even successfully tried a one-session XP to Seven via Vista in-place upgrade (in-place XP to Vista, installing service packs and drivers and then directly in-place further to Seven), to show some colleagues how to do a safe and working upgrade. I have never encountered any upgrade related problems; I do have had my share of installation problems and issues but I’ve always found out that after failing to do an in-place upgrade, the same issue has occurred also after a clean install. Most often the reason is non-compatible hardware. You cannot blame in-place if your hardware refuses to work with Seven.
First, let’s take a look at the chart about in-place options:
As you can see it is not possible to "downgrade when upgrading" i.e. you cannot in-place upgrade from for example Vista Ultimate to Seven Home Premium. You need to have the same or better edition (notice that you can in-place upgrade to Seven Professional only from Vista Business). Your current Vista needs at least service pack 1 to be able to upgrade to Seven.
Notice please: You can only in-place upgrade to Windows 7 from Vista. Older Windows versions (XP, 2000 etc.) can not be in-place upgraded to Seven You cannot in-place upgrade a 32-bit Vista to a 64-bit Seven or 64-bit Vista to a 32-bit Seven The language versions have to match, you can in-place upgrade an English Vista only with an English Seven.
So, let’s start. This guide will show you how to prepare and do an in-place upgrade from Vista to Seven. Following these steps you are most likely to get it right first time.
1. Check the compatibility issues
Download and run Windows 7 Upgrade Advisor Follow any instructions given Uninstall all incompatible software, update drivers and software if Advisor tells so
2. Prepare your system
Update (flash) your system BIOS to most current version After flashing BIOS, restore it to factory defaults 3. Prepare your software setup.
Uninstall all applications and software you never use or which is expired (test and trial versions, software you know you are never going to use like the game you tested but didn’t like etc.) Update AV and Firewall software to the most current versions, including virus definitions Turn off AV, Firewall and all malware software. Remember to turn them on again after installation is finished Check and run Windows Update until it tells you Vista is up to date Clean up your system deleting all unnecessary files like temp folders etc. Backup your system 4. Prepare your hardware setup.
Check Device Manager to assure all devices are working Disconnect all external devices, leave only the main display, mouse and keyboard If upgrading a laptop, be sure it is connected to an AC power source. That’s it. Insert the install media and start doing an in-place upgrade. Please notice this is the most boring part of the process; an in-place upgrade can take hours.
An in-place upgrade can easily take longer than doing a clean install and re-installing all the software. If you don't have too much personal files to transfer, only have a limited amount of applications to re-install and if you have all install media, I recommend doing a clean install. Remember though there's nothing wrong doing an in-place upgrade. It works well and fine when done right.
is it possible to do an in place upgrade from Windows 7 Ultimate 32 Bit to Windows 7 Ultimate 64 Bit using full retail DVDs. I know I will have to update progs to 64Bit but there is plenty else which will not be affected.
From windows 7 64 bit ultimate sp1 to windows 7 64 bit ultimate sp1.I do have to note I accidently deleted a partition with 100 games some weeks ago which caused some not clean leftovers in registry, but they are only games, not a single system/ application. So I don't think this is a cause for upgrade to fail.The point of this inplace upgrade repair is to fix all the security/ settings / rights to default.Since I have security issues, acces denied etc. and I had tried to fix them with all sorts of commands, Icalcs, subinacl etc. (for full details on security issue view my topic created here ul...)It said it had trouble with following devices when checking on compatibility.AWBN4A-HW IDE controller (yellow exclaimation mark) Alcohol 120% Daemon tools Dungeon siege legends of Aranna.But I don't even have any IDE devices. Only Sata.So I uninstalled the IDE controller and other programs and tried setup again it went through.I have also run windows 7 upgrade assistant and gave no trouble other then some videogames that were not recognised or might not work (i have 200 of em installed)After the upgrade it rebooted and it said it had failed and was reverting back to old..This is the setuplog I took from the upgrade folders: setupact.rar (1,22 MB) - uploaded.to Seems to be stopped @ 63%..Could someone tell me why my upgrade is failing?
I have never done an in-place upgrade, so I am a little confused. One very knowledgeable friend told me that the in-place upgrade essentially runs a Windows Easy Transfer, does a clean install, and unpacks the transfer file, all automatically. Is it true? Is there a difference between doing an in-place upgrade and just using Easy Transfer?
I'm installing this for a friend and she bought a Windows 7 Pro from digital river. She's using Vista 32bit home premium, and it won't let me do an in-place upgrade. She has a lot of programs and I don't wish to re-install one by one, especially when they're programs in Japanese.
I have a Windows 7-64 box that works perfectly. Except that I cannot install any driver past 270.61 for my nVidia GTX-580.nVidia said this is a known problem with many users due to "The install failed because a control panel binary is failing to register because of a missing dependency." In other words, one of their installers/un-installers has removed a dll that's needed.I don't have a free week of my life to re-install everything on the box from scratch. It was suggested on the EVGA forum that I might:" in-place upgrade install of the OS. In other words, insert your OS disk. Start the install and select 'Upgrade'.I have high end software like Maya, CS6, SQL Server and many others (but no games, this is a business machine with no extra software).
Can Windows 7 Home Premium full version be used to do an in-place upgrade?
I have a new PC with Vista Home Premium that gives me a free upgrade to Windows 7 (but it will still cost 20 euros for p&p). Vista is pre-loaded and the recovery files are on a separate partition on one drive. Worse case scenario is the hard drive dies. I will need the full version of Windows 7 to do a clean install on a new hard drive, but at the moment I would just like to upgrade.
All things considered, I'm thinking of buying the full version while it's half price but need to know if I can use that to just do an upgrade. Is that possible?
I know that is a horrible Title for this post, but I'm really not sure what to call it exactly. The left part of the window that opens when attaching files to an email is gone, as shown in the picture below. Anyone know why this would be happening? The left portion, notice how the C:/ D:/ nothing is there.
I've searched on various forums and have had mixed results from years of this similar problem arising on XP and Vista as well. My Media Center no longer updates the program guide, making media center essentially useless. I've tried re-setting it like others suggested, but now it gets stuck at "Downloading TV Setup Data".
Everytime I try to access the program guide, it pops up a message saying my list is expired and needs to be updated, but it never actually updates. My internet connection is fine, the system is fine. Nothing has changed to potentially cause this conflict to arise. Is this a problem Microsoft has addressed or? Any help on fixing this would be appreciated, as I rely on MC to act as a DVR.
When I click on its icon I get a brief flash of Media guide, but it is immediatelly supplanted by a blue on-line stores and I cannot therefore open the Guide.How can I stop this?
I recently purchased a Leadtek DTV2000 H Plus TV tuner card. The card has many cool features, and is supplied with software from Leadtek.
I have managed to configure Media Center for the new card, however whilst I am using Media Center with my new card I am not able to access any program guides, to see what other channels are showing, determine what I want to watch next, etc.
Program guide information is displayed when I use the Leadtek software, just not when I am using Media Center.
If anybody has any suggestions on how to enable program guide information in Media Center it will be greatly appreciated.
Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.
As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.
This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.
There is a Simple way around this Block.
Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter") Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.
Hadn't opened Media Center for awhile, though the last time I did, everything worked fine. Internet TV Program Guide now lists some new Classic shows and I thought it would be cool to watch some old I Love Lucy... but nothing. And no other show opened either. Not one. Click on it and it makes that sound... but then nothing happens. Its not crucial, I can live without old reruns of I Love Lucy, but it bugs me that the program is not working as it should.I already re- ran set-up again 3 times. I read in some other thread about TunerFree MCE and I downloaded that, and it works fine. (Now I have access to hundreds of shows from all over the world I'll probably never watch!) But it obviously does not fix my problem. Most of the shows that are supposed to be available in the Program Guide I'm not even interested, but all of them used to open easily, no problem. So I'd like to be able to watch the ones I want.I have not tried to re-install Windows 7. Wasn't the hassle if I screwed something up. But I did update Silverlight, and that didn't do anything either.
Also, I no longer even have an icon for Internet TV, and I swear I did! Now there's just Recorded TV and Program Guide. I download anything I want to watch, either hours or days after it airs, so I don't have cable or any TV service, nor a TV tuner in my laptop. But downloading is time consuming, and takes up room on my hard drive, if I don't watch things right away, so I would love to be able to access Internet TV.There also used to be an whole section of documentaries that aren't there any more. I did already watch most of them, and I loved them. But that entire section is gone now. I think it might have been in Extras Gallery, but I'm not sure. All new weird stuff that also won't open is in there now.
Windows 7 has some fine in-built diagnostic tools to help you troubleshoot Windows Media Player issues, which you may be facing. This tutorial will give you some steps to fix common problem you might encounter with Windows Media Player 12.
after short check the 2 folders that take most of the place which is couple of GB'S are C:UserseliAppData oaming and the second is C:UserseliAppDataLocal this is how looks the content of folder "local"
and this is how looks the content of folder "roaming" can i kick those folder off without any harm be done?
I provide support for several computers at one location. I have arranged the icons to make it easy for users to find them. It seems that someone (probably a kid) who rearranges them almost everyday by selecting 'auto arrange icons'. Is there any way to lock them in place to prevent this from happening?
I place the desktop icons where I want them and the next time the computer starts or restarts the icons are back to some kind of default position. How do I make them stay whee I put them?
I was looking to download the new drivers for 64-bit version but the dell site is confusing me- some of the drivers they have in the list for my pc isn't for my hardware lol. Where's the best place to see which dirvers have not updated? Will they all show in device manager?
I want my computer to automatically play CDs/DVDs and run software CD installs when I put the CD/DVD in the drive... atm it seems I always have to manually locate and open the drive etc...
is there a way to set my computer so the cd/dvd runs automatically? windows premium 7 64 bit
This has been driving me nuts since i've had 7, but i really don't want to have to install some program to eliminate it. i really don't think i should have to. Every time I have a folder open, when i open another one it opens tight on top of the first one, they always are the same size which i don't want either. In other versions of windows i was always able to get each particular folder to open where i want on the desktop and any size i want by simply putting stretching it to the size i want and putting it where i want then closing it. It would open there every time thereafter even after restarting.
When you right clic an app shortcut (or even a file, anything..) you can assign it a keyboard shortcut, for example i used maj+alt+s for launching steam. Now after you made a lot you might not remember them all after some time and it'll be nice if there's a place to see a list of them (in registry or elsewhere) instead having to check all your shortcuts..! I guess there is, but where?
