is it possible to do an in place upgrade from Windows 7 Ultimate 32 Bit to Windows 7 Ultimate 64 Bit using full retail DVDs. I know I will have to update progs to 64Bit but there is plenty else which will not be affected.
View 4 Replies
A simple guide to a successful in-place upgrade
You have most likely heard that a clean (custom) install is the preferred install method when migrating to Windows 7. That is most certainly true. However, there are situations when in-place upgrade is more practical method to use. Tens, maybe hundreds of gigs software installed, no install media found for the software and so on.
You might have heard horror stories about non-working Seven and how it’s all in-place upgrade’s fault, or how an in-place leaves so much unwanted and not used pieces and bits it seriously puts your system in danger, at least making it slow. Most of these horror stories come from two types of users, those who have never done a Vista to Seven in-place upgrade but have heard third hand information and rumours, and those who have not prepared installation as it should be prepared.
I have done a lot of in-place upgrades, both from XP to Vista and lately from Vista to Seven. I have even successfully tried a one-session XP to Seven via Vista in-place upgrade (in-place XP to Vista, installing service packs and drivers and then directly in-place further to Seven), to show some colleagues how to do a safe and working upgrade. I have never encountered any upgrade related problems; I do have had my share of installation problems and issues but I’ve always found out that after failing to do an in-place upgrade, the same issue has occurred also after a clean install. Most often the reason is non-compatible hardware. You cannot blame in-place if your hardware refuses to work with Seven.
First, let’s take a look at the chart about in-place options:
As you can see it is not possible to "downgrade when upgrading" i.e. you cannot in-place upgrade from for example Vista Ultimate to Seven Home Premium. You need to have the same or better edition (notice that you can in-place upgrade to Seven Professional only from Vista Business). Your current Vista needs at least service pack 1 to be able to upgrade to Seven.
Notice please: You can only in-place upgrade to Windows 7 from Vista. Older Windows versions (XP, 2000 etc.) can not be in-place upgraded to Seven You cannot in-place upgrade a 32-bit Vista to a 64-bit Seven or 64-bit Vista to a 32-bit Seven The language versions have to match, you can in-place upgrade an English Vista only with an English Seven.
So, let’s start. This guide will show you how to prepare and do an in-place upgrade from Vista to Seven. Following these steps you are most likely to get it right first time.
1. Check the compatibility issues
Download and run Windows 7 Upgrade Advisor Follow any instructions given Uninstall all incompatible software, update drivers and software if Advisor tells so
2. Prepare your system
Update (flash) your system BIOS to most current version After flashing BIOS, restore it to factory defaults 3. Prepare your software setup.
Uninstall all applications and software you never use or which is expired (test and trial versions, software you know you are never going to use like the game you tested but didn’t like etc.) Update AV and Firewall software to the most current versions, including virus definitions Turn off AV, Firewall and all malware software. Remember to turn them on again after installation is finished Check and run Windows Update until it tells you Vista is up to date Clean up your system deleting all unnecessary files like temp folders etc. Backup your system 4. Prepare your hardware setup.
Check Device Manager to assure all devices are working Disconnect all external devices, leave only the main display, mouse and keyboard If upgrading a laptop, be sure it is connected to an AC power source. That’s it. Insert the install media and start doing an in-place upgrade. Please notice this is the most boring part of the process; an in-place upgrade can take hours.
An in-place upgrade can easily take longer than doing a clean install and re-installing all the software. If you don't have too much personal files to transfer, only have a limited amount of applications to re-install and if you have all install media, I recommend doing a clean install. Remember though there's nothing wrong doing an in-place upgrade. It works well and fine when done right.
From windows 7 64 bit ultimate sp1 to windows 7 64 bit ultimate sp1.I do have to note I accidently deleted a partition with 100 games some weeks ago which caused some not clean leftovers in registry, but they are only games, not a single system/ application. So I don't think this is a cause for upgrade to fail.The point of this inplace upgrade repair is to fix all the security/ settings / rights to default.Since I have security issues, acces denied etc. and I had tried to fix them with all sorts of commands, Icalcs, subinacl etc. (for full details on security issue view my topic created here ul...)It said it had trouble with following devices when checking on compatibility.AWBN4A-HW IDE controller (yellow exclaimation mark) Alcohol 120% Daemon tools Dungeon siege legends of Aranna.But I don't even have any IDE devices. Only Sata.So I uninstalled the IDE controller and other programs and tried setup again it went through.I have also run windows 7 upgrade assistant and gave no trouble other then some videogames that were not recognised or might not work (i have 200 of em installed)After the upgrade it rebooted and it said it had failed and was reverting back to old..This is the setuplog I took from the upgrade folders: setupact.rar (1,22 MB) - uploaded.to Seems to be stopped @ 63%..Could someone tell me why my upgrade is failing?
View 9 Replies View RelatedI have never done an in-place upgrade, so I am a little confused. One very knowledgeable friend told me that the in-place upgrade essentially runs a Windows Easy Transfer, does a clean install, and unpacks the transfer file, all automatically. Is it true? Is there a difference between doing an in-place upgrade and just using Easy Transfer?
View 8 Replies View RelatedIs the in-place upgrade to Windows 7 possible with
a) retail versions
b) OEM / OSB / SB version?
Or do I have to buy this special "upgrade version"?
I only get contradictorily information (very frustrating!) and need advice from your side.
P.S. Yes, I know about the pros and cons in general regarding in-place upgrade vs. clean installation.
I'm installing this for a friend and she bought a Windows 7 Pro from digital river. She's using Vista 32bit home premium, and it won't let me do an in-place upgrade. She has a lot of programs and I don't wish to re-install one by one, especially when they're programs in Japanese.
View 5 Replies View RelatedI have a Windows 7-64 box that works perfectly. Except that I cannot install any driver past 270.61 for my nVidia GTX-580.nVidia said this is a known problem with many users due to "The install failed because a control panel binary is failing to register because of a missing dependency." In other words, one of their installers/un-installers has removed a dll that's needed.I don't have a free week of my life to re-install everything on the box from scratch. It was suggested on the EVGA forum that I might:" in-place upgrade install of the OS. In other words, insert your OS disk. Start the install and select 'Upgrade'.I have high end software like Maya, CS6, SQL Server and many others (but no games, this is a business machine with no extra software).
View 2 Replies View Related Can Windows 7 Home Premium full version be used to do an in-place upgrade?
I have a new PC with Vista Home Premium that gives me a free upgrade to Windows 7 (but it will still cost 20 euros for p&p). Vista is pre-loaded and the recovery files are on a separate partition on one drive. Worse case scenario is the hard drive dies. I will need the full version of Windows 7 to do a clean install on a new hard drive, but at the moment I would just like to upgrade.
All things considered, I'm thinking of buying the full version while it's half price but need to know if I can use that to just do an upgrade. Is that possible?
Is it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?
after short check the 2 folders that take most of the place which is couple of GB'S are C:UserseliAppData oaming and the second is C:UserseliAppDataLocal this is how looks the content of folder "local"
and this is how looks the content of folder "roaming" can i kick those folder off without any harm be done?
I provide support for several computers at one location. I have arranged the icons to make it easy for users to find them. It seems that someone (probably a kid) who rearranges them almost everyday by selecting 'auto arrange icons'. Is there any way to lock them in place to prevent this from happening?
View 10 Replies View RelatedI place the desktop icons where I want them and the next time the computer starts or restarts the icons are back to some kind of default position. How do I make them stay whee I put them?
View 8 Replies View RelatedI was looking to download the new drivers for 64-bit version but the dell site is confusing me- some of the drivers they have in the list for my pc isn't for my hardware lol. Where's the best place to see which dirvers have not updated? Will they all show in device manager?
View 9 Replies View RelatedI want my computer to automatically play CDs/DVDs and run software CD installs when I put the CD/DVD in the drive... atm it seems I always have to manually locate and open the drive etc...
is there a way to set my computer so the cd/dvd runs automatically? windows premium 7 64 bit
This has been driving me nuts since i've had 7, but i really don't want to have to install some program to eliminate it. i really don't think i should have to. Every time I have a folder open, when i open another one it opens tight on top of the first one, they always are the same size which i don't want either. In other versions of windows i was always able to get each particular folder to open where i want on the desktop and any size i want by simply putting stretching it to the size i want and putting it where i want then closing it. It would open there every time thereafter even after restarting.
View 5 Replies View RelatedWhen you right clic an app shortcut (or even a file, anything..) you can assign it a keyboard shortcut, for example i used maj+alt+s for launching steam. Now after you made a lot you might not remember them all after some time and it'll be nice if there's a place to see a list of them (in registry or elsewhere) instead having to check all your shortcuts..! I guess there is, but where?
View 6 Replies View RelatedI am losing my place every time I type. It's like it's switching applications or something. I can't hardly work!!! It's hard for me to explain, but I'm typing even now and I have to constantly click my external mouse back to my spot and resume typing. A few seconds later, I have to do it again and again and again and again!
View 7 Replies View Relatedhow do i place printer to taskbar
View 7 Replies View RelatedHow To Increase Place in c drivd
View 2 Replies View RelatedEverytime i download something it goes directly to my hard drive :E and i want it to go to my C: and i have tryed the browser settings but it doesnt work I am using Windows 7 Home Premium 64 bit
View 2 Replies View RelatedI prefer to have my browser button on the far left of the taskbar. This is why I have the browser pinned here and I use grouping. Now I was wondering if it was possible to NOT have it pinned here but still have the button in the same place if I open it.
Like for example, nothing pinned in the taskbar and I have explorer/taskmanager opened and I open my browser and have the button automatically placed at the far left instead of the 3d position in this example.
Windows 7 prof 64bit
I have a series of applications that depend on an INI file being in the Windows directory. Also, many different users are allowed to log on and change the INI file. But Windows 7 places changed INI files in USER directories for the logged-on users. So my Apps never get to see the changes! How do I get Windows 7 to place my INI file in Windows directory where I need it?
View 7 Replies View RelatedI have a few programs that I like to load on Windows startup. Is there any way to have a program open in the same desktop location every time, rather than in the middle of the screen?
View 7 Replies View RelatedI create many new temporary folders every day. I am looking for a quick way to paste a time/date stamp for each new folder name. Wondering if there is a way I can link the time stamp to a windows hot key and use a paste ruleDon't want to use excel/word/cmd prompt and copy paste over to slow.
View 7 Replies View RelatedI recently installed 2 new disks, put windows (7) on it and kept the old hdd as a back up, and to just be able to get to my old files should it be necessary. However the question is this: Id love to just move all my games from my old disk to my new one, but I'd need the old registry values. Are they anywhere physically on the old disk? Obviously I can't acces them by regedit, so is there a way to import (parts) of it Or do I have to disconnect the new drives, boot on the old disk and copy what I need?
View 5 Replies View RelatedI was wondering if someone can clear this up for me. I just finished building my 1st desktop pc ever yesterday. It's running quite well I should say. Everything is normal except I noticed my cursor is lagging. My first reaction was that "My wireless mouse must be interfering with the router." From what I remembered, it was a steady lag. About every 1/2 sec it would skip from one place to another whenever I moved my mouse. I went to Best Buy looking for a wired mouse, but hated all of them, plus I love the wireless one I still have. Instead of getting a wired mouse, I bought a dual band Netgear router.When I got home and hooked it up and all, it worked perfectly. Then probably an hour later, lag lag lag again. I messed around with the router settings quite a bit, but it's not worth it since disabling the 2.4 Ghz signal is useless. I couldn't connect to the router (and internet) when I disabled the 2.4 Ghz band.
After I got both bands up, I decided to try using an old wired mouse I had. It worked for a few minutes without lag, but it appears that wasn't the case either. So I ruled out the possibility of router interference. I tried updating all the mouse drivers, but it said it was already installed. I have also downloaded all the Windows 7 updates. There were 41 of them with a size of 114 MB. That didn't appear to help either. Right now, as I'm typing, it tends to lag every other minutes. I even disconnected the wireless connection and it doesn't appear to be the case.Loading webpages is fast as ever. I have the desktop gadgets that monitor the CPU, Network, GPU, and Hard Drives. Plus, I have HWMonitor and CPU-Z (which I need to reinstall cause the disk icon is not the correct picture).
One more thing that is very important. After the new dual band router was hooked up, the lag with both wireless and wired mouse is different from the steady lag I mentioned before. It's more unpredictable in my opinion. I can't live with it certainly as I can't see where it's going and more time is wasted trying to pinpoint my cursor destination.
So I have an SSD for windows files *C:* and an HDD for my programs and things. I just changed the default install location for programs by getting to regedit->currentversion->programfilesdir and programfilesdir(x86), but now when I try to pin anything to the taskbar it defaults the pathing to the SSD. And the program's not there, so it doesn't work. Am I going to have to manually relabel everything or is there a way to change this?
View 1 Replies View RelatedI own serial # for Nero 6 (XP?), but I redownloaded Nero 6, and don't find a place to put my OEM serial number.Have new computer; old disk.
View 4 Replies View Relatedin windows 7, if you want to print an e-mail, how do you find a way to select "print"
View 1 Replies View RelatedI am trying to run the "character map" program that is a standard part of Windows. I get an error..."C:windowssystem32GetUName.dll is either not designed to run on Windows or it contains an error". Is there a safe place to download a new copy of the dll and once downloaded, how do I replace the copy that is there? The system does not let me (I'm an administrator) even change the name, let alone try to move the file elsewhere or delete it. Is there a way to get the file from my original DVD? When I put the DVD in, it just wants to do an install of the system and I certainly don't want to do that, just a single file.
View 9 Replies View RelatedIs there a way to place the Bootmgr driver back into a new Formated HD? I screwed up and formated the drive and erased everything so it won't load a new copy of windows.
View 3 Replies View Related
