ArcSoft TV Program Giving Pop Up When Set To Record TV Program?
Oct 3, 2012
I have an issue with my ArcSoft TV program. Recently something changed and now I get the UAC pop up asking if I want this program to make changes to my computer.Issue is this, I can set to record a program, but with the pop up now coming up, I have to be avaliable to click to record the progarm.Currently I have the UAC set not to ask (pop up). However I understand the reason for the UAC asking and I prefer it to ask. So what I need is a way to allow ArcSoft to run without the pop up, but all other programs to ask for security. What is the way to do this for this one program?
View 1 Replies
ADVERTISEMENT
Jan 20, 2012
I am hoping someone can help. I have 2 machines both running windows 7 64-bit with XP mode installed. On one, I have successfully loaded and run my program perfectly without a single hiccup but with the other it installs fine but will not open. All I get is a fatal errorE. The same install disc was used for both machines and I have checked to verify that all files are there.
View 9 Replies
View Related
Sep 6, 2011
Is there any program which can record all the letters typed on the keyboard for windows 7.
View 3 Replies
View Related
Aug 29, 2011
Im looking for a portable program which includes a Browser and a Mailing program, like Opera is, but NOT Opera (must be able to run beside Opera & Firefox!!)
View 5 Replies
View Related
Aug 14, 2012
I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
View 6 Replies
View Related
Jun 23, 2011
64bit application is getting installed in program files (*86). How to change the destination folder. Insta shield is not giving this option.
View 3 Replies
View Related
Sep 12, 2012
how can i write a program in c that shuts down a computer in 20 seconds
View 6 Replies
View Related
Dec 12, 2011
I don't know where this error hs_err_pid came from.I closed down explorer and there were all this notepad messages on my desktop and I can't get rid of them. Researching, I know this is a Java thing. I've uninstalled and reinstalled several times to no avail.My windows update is fully updated.I've run 3 virus programs.I notice this was addressed for someone using XP but what of Windows 7? My add/remove program file only contines the program Java (TM) update 29. Nothing else is listed as far as Java is concerned.I've run cleaner programs and these did not take care of the problem. Every time I restart my machine these errors immediate pop up at start up.
View 1 Replies
View Related
Oct 3, 2009
Im trying to run a program on Windows 7. The program is a logitech installer. But Windows 7 Program Compatibility Assistant blocks the program and prevent me from running it. I have tried disable the Program Compatibility Assistant service in the service manager and i have also enabled the "Turn off Program Compatibility Assistant" group policy.But windows still keep blocking the program.
View 9 Replies
View Related
Feb 25, 2012
I have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else.
CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.
View 5 Replies
View Related
Jan 15, 2013
My dad was using the computer to watch some videos online when Mozilla Firefox froze. Then I tried to get into the task manager using Ctrl+Alt+Del and that wouldn't work. Tried right clicking the taskbar and going into task manager and that didn't work either. So I just shoved the power button to turn off the computer, and turned it back on. It hung on the "Starting Windows" screen for a while, then it launched into check disk. It scanned for a bit, then said "File record segment 2xxx is unreadable" and it kept going until about 58%, then it just kept giving "File record segment 3xxxx is unreadable" and kept going up until "File record segment 44139 is unreadable". Then it said something about index errors and the computer reboot. Now it says "Reboot and select proper boot device or insert boot media in selected boot device and press a key"
View 4 Replies
View Related
Dec 3, 2012
I have W7 IE and have downloaded a word processing program (AbiWord) which I want to add to list of Default Programs. how to get this program added to the default list?
View 10 Replies
View Related
Sep 19, 2012
I would like to add "PDF Viewer Plus", by Nuance, to the list of Default Programs so I may associate it with my PDF files.
View 2 Replies
View Related
Aug 31, 2011
Running Windows 7 Pro, 64bit.We have a package of scripts and programs that comprise a custom application for OpenOffice 3.2 (do not want to upgrade OO at this point). We must support our package on Win XP, Vista and 7.A bunch of our scripts start up OpenOffice by running the command: C:Program FilesOpenOffice.org 3programsoffice.exe (with arguments).Works fine on XP. Fails on Windows 7 because the OO program installs itself into Program Files (x86). Even if I change properties of the installer file, in the Compatibility tab, to Win XP SP3, AND tell the installer to put it in C:Program Files, Windows 7 still installs it into Program Files (x86). We would LIKE to have the same script work on both flavors of Windows. I know we can modify our scripts to branch on which Windows, and choose two different paths to soffice.exe, but that's messy.I can't solve it by creating a shortcut in Program Files, to the program in Program Files (x86); that's not allowed.Is there some solution in Windows 7 to find the program no matter which place it lives? Like, a semi-intelligent environment variable for ProgramFiles that looks in one place, then the other?
Ie.: "C:\%ProgramFiles%OpenOffice.org 3programsoffice.exe
View 3 Replies
View Related
Feb 15, 2012
I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
View 7 Replies
View Related
Sep 6, 2010
I tried to open a program using the open with option and it changed the icons for every program on my laptop. I changed the desktop (network, my computer etc) icons back to default but can't manage to change the others. If i go into properties for the program and change it that way it doesn't do anything.
View 2 Replies
View Related
Jan 5, 2013
I have a program that can only run on 64-bit computers, and my 32-bit computer won't run it. Is there any way to convert the program to 32-bit?(there is no 32-bit version of this program). EDIT: I made a mistake in the title.
View 1 Replies
View Related
Mar 5, 2011
how do i put a program on the list in the sounds program events list??
View 3 Replies
View Related
Jun 18, 2012
I have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
View 7 Replies
View Related
Mar 23, 2012
Recently, for the umpteenth time, I tried the Windows DVD Maker and it actually worked! However, on the next attempt I get: "The program cannot access the file because it is being used by another program"I am burning a dvd-rw with several files, but I am not told which one is being accessed by another program.
View 1 Replies
View Related
Nov 24, 2012
i need web camera driver and arcsoft software
View 1 Replies
View Related
May 24, 2009
i was recently running windows 7 64 bit on my computer and just decided to switch to 32 bit 7. however i still have 2 program files. when i try to delete program files (x86) it tells me i need trusted installer permission. anyone have any ideas how i can delete the other program files?
View 7 Replies
View Related
Sep 4, 2009
Good/Bad of using Program Files (x86) vs Program Files
How do I know what to put where?
How do I knw if a program is x86 or 64?
Running Windows 7 64
View 2 Replies
View Related
Sep 26, 2009
I noticed there are 2 of these folders in local disk C:
when installing programs, which one should they go to? Are there differences between these 2 folders?
View 3 Replies
View Related
Feb 2, 2011
I am about to install Windows 7 (64bit) on my new 60GB SSD drive. I will keep a separate 1TB drive for all music, etc. and I intend to install most applications on the 1TB drive as well.However, since 64-bit windows by default has both a "Program Files" and "Program Files (x86)" folder for 32-bit apps I wonder if I could get in trouble by not installing 32-bit apps in the x86 folder?
View 2 Replies
View Related
Jan 9, 2013
many program I cant open Only Run as Administrator I open the program how to disable Run as Administrator I want to open a double click program
View 1 Replies
View Related
Mar 4, 2011
Trying to understand why windows 7 has program files and (x86) program files. Using windows premium 64 bit.Sometimes programs get installed to program files and sometimes they go to (x86) program files what is the difference?
View 4 Replies
View Related
Jul 26, 2011
How can i remove JUST the program from the list, without actually uninstalling it?Ive tried going toHKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall but i cannot find the program i want to do this to.
View 3 Replies
View Related
Jan 31, 2010
I have recently installed Win 7 Ultimate 64 bit OS. I have noticed it created two folders one "program files" and one "program files (x86). From what I have read so far the x86 folder is for 32 bit apps and the other for 64 bit apps. My question is:
I only want my OS and any critical apps on my SSD C drive so I created an E drive that I put all other apps on. On the E drive I have created only one folder "program files" and have been putting all other apps in it.
Everything appears to be working OK but should I have also created a folder x86 on the E drive and install all 32 bit apps in it or does the OS just know what to do regardless of the folder it is in?
View 4 Replies
View Related
Nov 3, 2011
I have a tmp file that says it cannot be run in dos.
View 2 Replies
View Related
Apr 17, 2011
I'm used to pressing F5 to refresh. But on this laptop, you apparently have to hold the 'FN' key with it. The F5 button also functions as the 'back' button in media players, I think. This: |<<Is there a way to change it so it only refreshes? It's driving me mad.I tried going to BIOS but the only options I have is to enable and disable the keys. (they are set to enabled
View 6 Replies
View Related