Windows 7 Ultimate Won't Run "Windows Remote Assistance"
Apr 13, 2012
I just built my sister a win7pro machine and I set it up so she can easily contact me and do remote assistance. I tested my setup with my laptop also running win7pro and mailed the machine off to her (some 2K miles away). Then I decided I'd tried to do a session between my laptop and my main machine a Windows 7 Ultimate (both my laptop and the main desktop are 64bit). The windows 7 ultimate machine will not connect to the windows assistance peer to peer network; my laptop does. I ran the network connection checker from MS (passed all tests); I turned off the FW and tried again, but still no connection. I checked the Upnp setting in the router and it's enabled. I'm beginning to think it may have something to do with my network card itself. The on-board built-in NIC failed a few months back to I installed a Netgear NIC; it been working fine since then with no other strange occurrences. Can anyone think of anything else that might stop a machine from connecting to this network? Does anyone know what are the ports used for Windows remote assistance?
I have two pc's: my main one and my HTPC. I cant afford to get my remote yet so i want to setup remote desktop assistant in a way where i can connect when ever i want without worrying about the license.is there anyway to set this up? Both computers are on my network.I don't want to use remote desktop because i don't want it to log the htpc out, since it will be used to watch movies and all.
When using Remote assistance in windows 7 it shows a list(albeit a small one) of past addresses(ip or computername) that you have logged into. Problem is it is numeric/alphabetic order. Is there a registry setting I can change so it will show me this History in chronological order?
I had a question concerning the remote desktop assistance on windows 7. I noticed that it was enabled today and I was wondering if windows 7 enables it by default or if someone had to enable it. My friend told me that hackers can get on to your computer through this so I was concerned but wouldn't I have to allow them access to my computer? I was wondering also if downloading things off the internet could have enabled it?
i have a problem on my PC with Remote Assistance.i work in the end user support so i need to use it alote.the problem is that when ever i use the remote assistance my PC totaly disconnects from the internet!
I am trying to use WLM RA to connect to another W7 PC. Occasionally it works OK but usually when I accept the invite WLM disconnects me and brings up a box telling me it will reconnect in X seconds. If I keeping getting the other PC to send invites it might eventually work but it may take 50+ attempts, sometimes I just give up.
I am trying to set it up so I can use remote assistance for a Win7 Home PC and the user not have to know the admin password to allow it. I am trying to look down a teens PC so they have to go to me for installs.
But it seems when I try to do RA they have to know the admin password at the actual computer, is there anyway to make it so RA does not prompt for it?
I had a new system made up for me a few months back and as I was so insistent on excellent cooling - fans - RAM etc, I didn't pay enough attention to the HDD's.Subsequently the system was installed on an SSD 60GB. For a normal user this would be adequate, but I work with a lot of digital programs that write to the app data folders and I can't safely move those onto the D:Drive where I have programs and Docs - all libraries. I have hard linked everything I could, but the more Windows updates and other updates I do, the Winsxs folder is already 7.2GB.I only have 30GB's left after a very short time and would like to be able to install another Windows 7 x64 on a 1TB drive I can free up easily. Ideally, I want to keep the SSD drive as an OS to use for general use and get all my graphics programs onto a different system for work purposes.I have not ever dual booted before and have no idea how to go about it - or I do but it could be wrong.Is it even possible to have one OS on an SSD and the other on a normal HDD? I do have an extra unused OEM version of Win 7 x64 ultimate and hope that is legal to use two identical OS's on same machine - with different keys..If I cannot dual boot I am willing to erase the SSD, probably use the space for something else, and use a normal spinner. It's that important for me to be able to work without disabling everything and have space left over.
Today is the first time I have had to access my work pc remotely so went out and bought Windows 7 Home. I accessed my works VPN network via the browser (have an icon in my taskbar called "network Connect" which tell me how long I have been connected for), I was able to ping my work PC but when I tried connect via Remote Desktop I was getting an error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote Access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
I am using a belkin flip to switch from a new computer to old computer and vice versa. Many a times, when I press the remote button to flip THE MOUSE FREEZEZ. i AM FORCED TO RESTART and my data gets lost. Recently I had to reinstall Dragon Naturally Speaking 11 professional due to having lost all the data in the user profile. Both the computers are Windows 7 ultimate 32 bit.
Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC.
I have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
ComboFix was recommended to me in the past, so I disabled avast! and I ran ComboFix as an administrator. Once it was finished, my laptop rebooted and I was presented with the "Preparing Log Report" screen, so I eventually closed ComboFix. Nothing would run until I rebooted and now everything seems to have gone back to the way it was (sluggish performance included.)After some quick research, I came to realize that running ComboFix without assistance is a bad idea. I'd like to make sure I haven't done any damage to my system and, if possible, improve its performance.
My specs are as follows: Asus G50VT (BestBuy edition) Windows 7 Ultimate x64 Intel Core2 Duo P7450 (2.13GHz, dual core) 4GB RAM nVidia GeForce 9800M GS 512MB
Aftermarket Broadcom WiFi adapter (I needed this to run Mac OS X alongside Windows and Ubuntu, but only Windows is installed now.) Also, due to reheating, I recently removed the heatsinks from the CPU & CPU, cleaned out dust and applied Arctic Silver 5 thermal grease.
I just got my M14x back from the dell repair center and I just booted it up and did the first time setup and all (OS was formatted) and I noticed that AlienFX and all Alienware applications are missing infact.
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
how can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
I bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
I need the to remotely connect from Windows XP to windows 7(with the remote settings: Allow connections from computers running any version of Remote Desktop (less secure) ) enabled. And before it gives me any of my windows 7 Welcome Screen, should prompt the user on the XP machine that is trying to connect for the windows 7 credentials, just like when connecting from Windows 7 to Windows 7 with the Less secure mode in (Remote Desktop settings).
I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
I have two SATA hard disks on my Dell Precision 690. I had Windows XP (x64) pre-installed in first disk. Recently I installed Windows 7 in the other disk. The Windows 7 works well and I get options to log into either Windows at startup. But I curiously observe that I cannot VPN to my employer from that Windows 7 installation.Also, I installed LogMein and that too is blocked. I have installed VMWare on the Windows 7 and I could perfectly run VPN and LogMein from that VMWare installation. I have tried hundreds of advises and settings in the Services section to no avail. I even cleaned the Windows 7 install and started afresh; still cannot log to VPN
I have a desktop computer running Windows 7 and a thin client (Wyse V90L) running Win XP Embedded. I am using Remote Desktop to log into my desktop computer running Windows 7. The problem is that despite having set up Remote Desktop on the client to 'Play on this Computer', no audio plays. When I click on the volume control, there is no slider and instead the message 'no audio device is installed' is displayed. If I choose to leave sound at my desktop, then it functions as expected.
I need to set up windows media center on my sons computer. he has a verizon fios set top box.we do not have a windows media center remote or any IR remote. all we have is the verizon remote for the verizon box.so how can i by pass the stupid IR hardware not connected message?
I have Windows 7 RC running on my laptop and I love it. I also just came into possession of an older machine that I'm interested in turning into a small file server running Ubuntu (also because I've always wanted to tinker around with linux). I was wondering though what would be a good solution for remote administration for this setup. That way I can just have the server running and pop into it when I need to to do work.
