There's more than one thing wrong with the Windows 7 Backup. First, it has never worked and it fails in every attempt at backing up. Second, MS failed to provide adequate information or diagnostic tools to explain just why it isn't working! It's pitiful.My issue is that even though Windows 7 64-bit Professional "sees" and utilizes my External Western Digital "Elements" 500GB (ntfs) harddrive, Windows 7's Backup utilility fails to find that drive when I backup to it, even though that same dialog SHOWS the external drive! Its error message says something to the effect of: "path not found". And, although I have to wait 40 minutes for it to supposedly be backing up data, it fails! If it cannot find the path, it should say that at the beginning... not 40 minutes later!
My system:
MB: ASRock Z68 Extreme 3 Gen 3 * CPU: Intel Corei5 (2500K) * GPU: Intel Onboard * SOUND: Onboard * CPU COOLER: CoolerMaster Hyper 212 Evo * PSU: Seasonic X650W 80+Gold * RAM:G.SKILL Ares Series 8GB-F3-1600C8D-8GAB * CASE: LIAN LI PC-A70F ATX Full Aluminum Tower OS: Windows 7 Pro 64-bit * BROWSER: IE9 It won't do a full backup. It won't do an "image" backup. Nothing. I don't know why.
I have a Dell Inspiron 1721 connected to a new Seagate external hard drive.The Inspiron has 280GB of which 85 are free.The Seagate has 465GB with 445GB free.Several times I have attempted to back up the Inspiron and so far have been unsuccessful.The message I get is:Your last backup did not complete successfully.Windows Backup could not create a zip file. This could because the drive that Windows is installed on does not have enough space, or it could be a temporary error. Make sure you have at least 400MB of free space and try again.
Although originally working, now Windows 7 backup will not work.i am running 32bit Ultimate.I have emptied the backup drive, the back up starts ... runs to about 80% of progress bar ... then fails with message Backup failed to complete.The error code is ox81000015.This says that Windows could not zip a file ... and remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails.
I have been trying for a few days now to get Windows to do a full backup of my new PC. For some reason it just wont finishI thought perhaps it was due to other active programs so I shut down everything else that was running, still Fails.Thought it might be a power issue so I set all the options to never shut down, never sleep, never hibernate, and the backup still fails.And now when I try to run a backup it tells me that it can't find the drive that the backup is set to use. But I can browse the drive fine through windows explorer?
I am trying to make a disk image in Win7 to a partition on my USB HDD.The partition is a freshly formatted 116GB. Win7 says the backup image will require up to 45GB. Yet when the backup process begins, it returns an error message saying there isn't enough disk space for the image.This is apparently a bogus message because I have saved other backup images of this PC to that partition in the past. In fact, I just re-formatted that partition to remove an older image of the same PC (same approx. size image) so I could save the fresh image to it. Can anyone tell me why Win7 insists there's not enough room on a clean 116GB partition for a 45GB image?
7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
Although originally working, now W7 backup will not work.I am running 32bit UltimateI have emptied the backup drive,started a whole new backup - the back up starts ..uns to about 80% of progress bar ... then fails with message Backup failed to omplete.The error code is ox81000015This says that Windows could not zip a file... and to remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails
When I try to find Backup and Restore in my computer I fail to find it. I tried to load it using Command Prompt "%SystemRoot%System32control1.exe /name Microsoft.Backupandrestore" and the page shows blank with the note "The page failed to Load" I have Acronis installed on my computer.
I attempted to backup my systems the other day when I recieved an error code. After searching this forum, It was determined that the code made reference to the fact that a necessary service was not running, in this case the Task Scheduler.I have used the Services program (as an administrator) to attempt to restart this service, but in the properties every option in grayed out. I have checked and all dependant services for the Task Scheduler are running normally. I have run the checkdisk utility from the command prompt, and it did fix some corrupted files, but even after that the options are still greyed out.
Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
Basically what the title there says, the quotations show the only information given to me on this issue. I've turned off Comodo as I read on a different help topic that they can sometimes interfere,I'm using Home edition, 64 bit, if that helps at all.ackup software to use perhaps? Basically, my computer has had issues with it before (some that have completely stumped even my most tech-savvy friends!) and after multiple instances in the past solved only by a full re-install, I'd like to make sure it -stays- functional, without me having to wipe my drive due to some inexplicable error and fully re-install again.
Since Sept 17, 2011, each time I shut down I get the message that these updates are being installed. When I checked my up date history these two updates were successfully installed each time.
I'm running Windows 7 on a Toshiba laptop bought last year. My windows explorer is currently stuck in a permanent state of crashing every 3 seconds. I've tried restarting, shutting down, running virus checks and removing all suspicious adware, removing cookies, and calling tech support. They said it was a problem with a corrupted something to do with the explorer file. It started by crashing once or twice whenever I viewed a particular folder on my desktop (all it had was some video files), and now it crashes when I'm not doing anything. Immediately crashes after reset. I'm operating in safe mode now and the tech guy said the problem is fixable from my end, but wouldn't tell me how to do it unless I gave him $160. And I don't have a credit card
If this helps, the tech guy was remotely controlling my computer and he's left open Services where he was looking at Computer Browser and he said he could fix it in one or two steps from there. The problem with the browser crash was cited as
"The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start."
I have a copy of Windows 7 Home Premium installed on this here computer. Now, It's an OEM. Here's the catch. This computer, right here, right now- is new. My OEM copy has been used twice, so according to the activation servers, I shouldn't be allowed to do that because OEMs are supposed to be machine specific. Now, to do some explaining. My old computer completely and utterly died last year, so I was unable to uninstall Windows 7 from the system, So I think it still believes it's registered to that computer, which is no longer the case. It is, in fact, registered to this new one. But since the key has been used before. We've got a problem?
I'm using MS Office 2003 SP3 with Windows Home Premium 64-bit, and I've noticed that both Excel and Word crash a lot. Certain keystroke combinations result in this more than others - e.g. Ctrl+V or Ctrl+C between cells in Excel.I think this problem occurs for me on every 2 out of 3 Excel session, so it is very very frequent.
Windows Live Mail closes unexpectedly repeatedly without error message and one account disappeared?
I have multiple accounts being used for years on Windows Live Mail - Version 2009 - Build 14.0.8117.0416 on XP Pro SP3
Recently, Windows Live Mail closes unexpectedly repeatedly without error message Then as I kept trying to figure out I noticed one account disappeared? I think that happened later.
I have the ENTIRE WL MAIL Log file.
To track why this was happening I went offline mode and it would not crash. So, I figured it was something to do with the Sync. So I disabled the Auto Sync for every account I had and did manual syncs for one account at a time. Found the account that was causing this.
Its a hotmail account. I signed into Hotmail and all seems ok. I am posting the follow lines from the LOG, when I manually synched that account from WL Mail a few times.
I could try to trace back into the LOGS as to when this drama actually started originally, and post that and / or most of it. Let me know if someone can help dissect Windows Live Mail issues. Found its due to Sync of one account, Error Log info posted.
Code: * Log opened: 2012-05-23T11:18:14Z * Windows Live Mail 14.0.8117.0416*********************************************************************************
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, Intel64 Family 6 Model 37 Stepping 2 Processor Count: 4 RAM: 8119 Mb Graphics Card: ATI Radeon HD 5450, 1024 Mb Hard Drives: C: Total - 938828 MB, Free - 580455 MB; Motherboard: Dell Inc., 0T568R Antivirus: PC Cleaner Pro, Updated: Yes, On-Demand Scanner: Disabled
My computer repeatedly shuts down on me. Yesterday it must have shut down on me 20 times. My virus and malware scans come out clean. It usually goes to a menu asking me if I want to start the computer normally or in safe mode. However sometimes, I have to run start-up repair and sometimes I get a blue screen. The problem is the blue screen doesn't stay up long enough for me to write down error codes or anything else it says.
I have a Sony VAIO laptop running Windows 7 Home Premium 64-bit with a single 500 GB hard drive. A year ago, when the computer was new, I used a free partition manager program (Partition Wizard maybe?) to allocate about 60 GB for drive C: which holds Windows 7 and all of my software apps. I allocated the rest of the free space to D: for all of my data files. Sony also has a 13GB recovery partition and a 100 MB System Reserved partition which preceed C: and D: on the hard drive.
Three days ago, when I booted the computer for the day, drive D: was gone. Disk Management showed free, unallocated space equal to the size of my missing drive D:. Using Sony live chat support, the technician used Disk Management to allocate the 400 GB of free space to D: and formatted the partition. I then restored my missing data from a backup.The next day I booted my computer and drive D: was gone again. Disk Management again shows free, unallocated space equal to the size of my missing drive D:.
I have no third-party disk management software installed. Recent changes to my system include:
1) SmartSync Software recently downloaded a new version of SmartSync Pro (version 4.0) to my hard drive.
I have a Toshiba L305 Satellite laptop.It had windows vista OS. I tried to upgrade it to windows 7 but the upgrade was unsuccessful and a message was displayed on a windows 7 background that it would revert back to the older OS. It kept rebooting every time and shutting down with display of this message. Since the computer was not working anyways I took this as an opportunity to disassemble the system and clean it inside out as I had'nt cleaned it since I bought the system. After assembling back the system,, when I boot the system the computer after the POST displays the same message and shuts down but the difference this time being it does'nt reboot back on its own.When I start the system the second time it shuts down much quicker many seconds even before the message display.The same keeps repeating everytime. Booting for a a minute or two the forst time followed by a shutdown and then after rebooting shutting down much quicker time. What could be the problem PSU or excess heat at the CPU.
I'm having a problem with staying connected to my network with my Windows 7 PC. I have several other machines running XP and a laptop with Vista none of which are experiancing the problem.Basically what happens is the network adapter drops the connection whenever there's a high amount of throughput. Streaming media, transfering files, gaming, download all do it. Browsing is totally stable but as soon as I try to download a few things or move some stuff around the network it disconnects.It's a Linksys AG241v2 with the Pheonix Firmware and an Asus Crosshair in the PC. I've tried sifting through the forums but none of the solutions have worked so far.
I believe I have a unique trouble with my network adapter. It is installing every single time that windows starts, always behaving as a different piece of hardware thus driver is named like: "Atheros (...) Ethernet Controller #151" and increasing and what more, still having different MAC address. My problem is that my (legal) Windows (Win 7 Home Premium 64bit) after few startups starts thinking he is illegal every time I activate it by phone. I am beginning to be desperate about this. Over time I was thinking about several solutions to this but I am not capable of executing them alone. Two examples:
1.) One possibility is disabling automatic driver installation but in tutorials and forums it is done through pgedit.msc that is absent on Home Premium
2.) Disabling my network card completely (or removing it from my laptop) is also a way because I am using only wifi, but I havent found any way how to do it
... Network card is probably broken, so sending my nb to service could also work, but it is quite inconvenient considering time and money thrown away, i dont prefer this option
Windows 7 64 Working for a gentleman who bought a Sony laptop from Costco about a year ago. This 'issue' has been going on for quite some time (6 months or so). I am not sure what goes on with 'daily' use of the computer as I work/help sporadically. The gentleman is older and does not understand how discriminating one must be when surfing online; he has done his fair share of 'clicking' whatever pops up. I mention this because something is interfering with software... The problem: We download the drivers for HP Officjet Pro L7650 All In One. We choose the download with the whole nine yards so that we can scan, fax, print, etc. We are wireless. The download is quick and easy. The printer works just fine. A few days or maybe a week later... we choose 'print' and get a message: 'Windows applications does not recognize the printer...". Costco offers a 'concierge' line... you can call and trouble shoot. They have had me on the phone with HP... I am confident that I am 'cleaning' the computer and not installing the same drivers and software on top of the old ones. The 'concierge' says that the software is being corrupted... by 'something'. One fellow said that Windows 7 has this issue when the updates are installed... however, it's happening all the time.