Backup Continuously Fails, "The RPC Server Is Unavailable"?
Feb 17, 2012
Basically what the title there says, the quotations show the only information given to me on this issue. I've turned off Comodo as I read on a different help topic that they can sometimes interfere,I'm using Home edition, 64 bit, if that helps at all.ackup software to use perhaps? Basically, my computer has had issues with it before (some that have completely stumped even my most tech-savvy friends!) and after multiple instances in the past solved only by a full re-install, I'd like to make sure it -stays- functional, without me having to wipe my drive due to some inexplicable error and fully re-install again.
View 5 Replies
ADVERTISEMENT
Jan 2, 2012
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
View 2 Replies
View Related
Dec 20, 2009
I keep getting this popup and it says 'The email server is currently unavailable!'. It happens regularly but not all the time and sometimes all at once. You know like buses! Thanks for your help in advance!
P.S It seems as though it's nothing to do with the email client.
View 9 Replies
View Related
Mar 6, 2012
I write command net start RpcSs but give me system error 5 has occurred
View 3 Replies
View Related
Jan 21, 2013
Windows fails to connect to system events log and events log service is unavailable.
View 1 Replies
View Related
Jul 11, 2011
9 times out of 10 i cannot get pages to load they are either "Timed out" or "Can not connect to server" & the latest one is "firefox has ??????? in a way that it will never be able to connect" Can't remember the ?????? part, messages along these lines, My signal strength is full & when i run trouble shooter it comes back with "No problem was found"
View 2 Replies
View Related
Nov 17, 2011
I am trying to forcibly end a protected program in the windows 7 cmd (taskkill /S system /U domainOwner /F /PID) and it is telling me that the rpc server is unavailable. How to forcibly & permanently delete/cripple a program.
View 7 Replies
View Related
Oct 9, 2009
sql server installation fails on windows 7.
View 9 Replies
View Related
Jul 5, 2012
Although originally working, now W7 backup will not work.I am running 32bit UltimateI have emptied the backup drive,started a whole new backup - the back up starts ..uns to about 80% of progress bar ... then fails with message Backup failed to omplete.The error code is ox81000015This says that Windows could not zip a file... and to remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails
View 7 Replies
View Related
Oct 11, 2012
I have a Dell Inspiron 1721 connected to a new Seagate external hard drive.The Inspiron has 280GB of which 85 are free.The Seagate has 465GB with 445GB free.Several times I have attempted to back up the Inspiron and so far have been unsuccessful.The message I get is:Your last backup did not complete successfully.Windows Backup could not create a zip file. This could because the drive that Windows is installed on does not have enough space, or it could be a temporary error. Make sure you have at least 400MB of free space and try again.
View 1 Replies
View Related
Jul 5, 2012
Although originally working, now Windows 7 backup will not work.i am running 32bit Ultimate.I have emptied the backup drive, the back up starts ... runs to about 80% of progress bar ... then fails with message Backup failed to complete.The error code is ox81000015.This says that Windows could not zip a file ... and remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails.
View 9 Replies
View Related
Sep 6, 2012
Windows 7/64 SP1
I have an external drive H: attached (2.2 TB NTFS partition). The drive is practically empty.
Today I wanted to do a full backup of the system. After a while it says that the last backup did not finish successfully (translated from German).
[code]....
View 2 Replies
View Related
Jul 6, 2011
When I try to find Backup and Restore in my computer I fail to find it. I tried to load it using Command Prompt "%SystemRoot%System32control1.exe /name Microsoft.Backupandrestore" and the page shows blank with the note "The page failed to Load" I have Acronis installed on my computer.
View 12 Replies
View Related
Jan 1, 2013
There's more than one thing wrong with the Windows 7 Backup. First, it has never worked and it fails in every attempt at backing up. Second, MS failed to provide adequate information or diagnostic tools to explain just why it isn't working! It's pitiful.My issue is that even though Windows 7 64-bit Professional "sees" and utilizes my External Western Digital "Elements" 500GB (ntfs) harddrive, Windows 7's Backup utilility fails to find that drive when I backup to it, even though that same dialog SHOWS the external drive! Its error message says something to the effect of: "path not found". And, although I have to wait 40 minutes for it to supposedly be backing up data, it fails! If it cannot find the path, it should say that at the beginning... not 40 minutes later!
My system:
MB: ASRock Z68 Extreme 3 Gen 3 * CPU: Intel Corei5 (2500K) * GPU: Intel Onboard * SOUND: Onboard * CPU COOLER: CoolerMaster Hyper 212 Evo * PSU: Seasonic X650W 80+Gold * RAM:G.SKILL Ares Series 8GB-F3-1600C8D-8GAB * CASE: LIAN LI PC-A70F ATX Full Aluminum Tower OS: Windows 7 Pro 64-bit * BROWSER: IE9 It won't do a full backup. It won't do an "image" backup. Nothing. I don't know why.
View 14 Replies
View Related
Jan 8, 2013
Windows back-up doesn't work well. I tried it twice and it just says it failed - no reason given. I am not interested in 'cloud' back-up.
View 2 Replies
View Related
Oct 30, 2012
I have been trying for a few days now to get Windows to do a full backup of my new PC. For some reason it just wont finishI thought perhaps it was due to other active programs so I shut down everything else that was running, still Fails.Thought it might be a power issue so I set all the options to never shut down, never sleep, never hibernate, and the backup still fails.And now when I try to run a backup it tells me that it can't find the drive that the backup is set to use. But I can browse the drive fine through windows explorer?
View 1 Replies
View Related
Nov 16, 2009
Just installed 64-bit Win 7. Everything works well except backup fails. The error is "Away Mode". Unlike Vista, not way to turn Away Mode off.
Suggestions? 3rd party utility? Trick? MSI board in HP desktop - now way to get to BIOS to turn off.
View 4 Replies
View Related
Oct 15, 2012
I am trying to make a disk image in Win7 to a partition on my USB HDD.The partition is a freshly formatted 116GB. Win7 says the backup image will require up to 45GB. Yet when the backup process begins, it returns an error message saying there isn't enough disk space for the image.This is apparently a bogus message because I have saved other backup images of this PC to that partition in the past. In fact, I just re-formatted that partition to remove an older image of the same PC (same approx. size image) so I could save the fresh image to it. Can anyone tell me why Win7 insists there's not enough room on a clean 116GB partition for a 45GB image?
View 3 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Aug 8, 2012
I attempted to backup my systems the other day when I recieved an error code. After searching this forum, It was determined that the code made reference to the fact that a necessary service was not running, in this case the Task Scheduler.I have used the Services program (as an administrator) to attempt to restart this service, but in the properties every option in grayed out. I have checked and all dependant services for the Task Scheduler are running normally. I have run the checkdisk utility from the command prompt, and it did fix some corrupted files, but even after that the options are still greyed out.
View 8 Replies
View Related
Jul 10, 2009
Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
View 0 Replies
View Related
Jan 31, 2011
7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies
View Related
Jul 24, 2009
Someone is giving me their older computer, with pretty unimpressive specs. The only thing I'm concerned about is the 512MB of memory. On the other hand, I'm only planning on using the computer to act as a torrent and backup "server."
Will I have any issues running Windows 7? How about 64-bit, which allegedly requires 2GB of memory minimum? If I can't run it, it's not a big deal, but I was hoping to have all my systems running Windows 7.
View 8 Replies
View Related
Apr 30, 2012
The audio services worked fine at first. But after optimizing the system for gaming and security, the "Windows Audio Endpoint Builder" service fails to start. It gives the error: "Error 1722: The RPC server is unavailable" This is required for the "Windows Audio" service, so I have no sound now. Does anyone know the cause of this error? Here are the services that I am running...
Application Experience: Manual
Application Information: Manual
DCOM Server Process Launcher: Automatic*
Group Policy Client: Automatic*
Human Interface Device Access: Manual
[code]....
Should I be running any additional services? I skipped Vista and am still using XP.
View 1 Replies
View Related
May 26, 2011
how to backup all printer definitions in a MSCS Cluster Server 2003 environment. The printers are integrated in the cluster. As long as he printers have not been in the cluster, we used printmig.exe, but this is not working in a cluster.
View 3 Replies
View Related
Feb 25, 2012
My system is continuously losing space, down to the last megabyte, even without using it. I've tried deleting all but my last system restore point, and even so, that only uses up 15% so I'm told. I've deleted all unnecessary programs down to the bare essential stuff, I've cleared internet history/cookies often, I've deleted gig after gig of my music until it was gone, and I have virus protection software that hasn't brought up anything major. It's not going away in chunks, just megabytes at a time. I've done everything online I can find, and nothing stopped it, what's happening here?
View 3 Replies
View Related
Sep 12, 2011
I have a Intel Quad Core HP elite Desktop M8190a everything is as manufactured except i upgraded the ram to 4GB.Originally running Vista .. Last week while playing a mp3 file from an external HDD a loud "ticking" occured then the computer crashed. Restarted automatically then a BSOD appeared stating something about a BAD_POOL_CALLER.
Problem Name:BlueScreen
BCCode:50
BCP1:8C100000
BCP2:00000000
BCP3:82E5A1C5
[code]....
For the last week it has kept crashing daily so i decided to do a full system format to take it back to factory settings. Seemed all was going well, until i got a message stating "bad system configuration, unable to install windows". So i decided to do a fresh clean install of windows 7 64bit (genuine) that i had purchased and had been meaning to do for months. All went well .. connected to the internet fine, activated windows 7. I then installed my printer and all seemed fine. But the second i hooked up my external HDD (which is not new, ive had it as a backup since i purchased the pc 4yrs ago) .. BSOD !!! AGAIN!!! Not sure if it was a coinsidence or not .. but now the pc will not load past the windows screen it just keeps restarting .. so i cant even see the minidump problem .. Also there is no option to use SAFE MODE .. which seems odd. Only options are "Start Windows normally" or "Lauch repair" as this is a fresh OS install attempt there is no last known good configuration .. also i did notice just before one of the crashes that windows was saying it wasnt a "Genuine Version" - but i did purchase it from a store.
View 5 Replies
View Related
May 2, 2011
Yesterday, my comp was still run as normal. Once window update(IE9 update)done and I restarted my computer and played game(PES 2011), the graphic started being not clear and then blue screen occurred. Afterward, I cleaned up the dust in my CPU and also updated my NVIDIA driver to 270.61 version. However, blue screen still occurred repetitively until I was forced to start in safe mode. So, I hope to find out any problems before further action.Here is the error came out from the blue screen.
[code]....
View 14 Replies
View Related
May 1, 2012
when I start the pc it just restarts and boots just before start up n I made no changes.. what could be wrong ?
View 9 Replies
View Related
Mar 30, 2012
I have a Dell Inspiron Mini 1018 and it no longer boots fully into windows. It goes through the prompt screen at start-up normally and goes to the next screen, which is a black screen with a green loading bar and has the Microsoft corporation copyright below it.Normally it will boot into the normal windows operating system after this screen, however it just keeps restarting and cycling through these two screens indefinitely.I have already disassembled the computer and cleaned it out and looked for any loose and/broken components but saw neither. Also, I have already re-imaged the computer, setting it back to the original factory state. Neither of these has seemed to help the problem at all and it continues.
View 1 Replies
View Related
May 1, 2012
my user account keeps getting locked out on my domain. It's happening about every 30-60 minutes from my IP address. I've checked the logs on my DCs and the are Pre-Authentication errors due to my laptop being Windows 7 and the DCs running Server 2003. I've tried updating my password and making sure I am logged out of every other server/PC/mapped drive on the domain. I've also tried changing my IP, just because.The strangest part is this happens when my laptop is not connected to the network as well. I will check the logs and my IP Address is listed as the offender.
View 3 Replies
View Related
