I keep getting this popup and it says 'The email server is currently unavailable!'. It happens regularly but not all the time and sometimes all at once. You know like buses! Thanks for your help in advance!
P.S It seems as though it's nothing to do with the email client.
I write command net start RpcSs but give me system error 5 has occurred
View 3 Replies View Related9 times out of 10 i cannot get pages to load they are either "Timed out" or "Can not connect to server" & the latest one is "firefox has ??????? in a way that it will never be able to connect" Can't remember the ?????? part, messages along these lines, My signal strength is full & when i run trouble shooter it comes back with "No problem was found"
View 2 Replies View RelatedI am trying to forcibly end a protected program in the windows 7 cmd (taskkill /S system /U domainOwner /F /PID) and it is telling me that the rpc server is unavailable. How to forcibly & permanently delete/cripple a program.
View 7 Replies View RelatedBasically what the title there says, the quotations show the only information given to me on this issue. I've turned off Comodo as I read on a different help topic that they can sometimes interfere,I'm using Home edition, 64 bit, if that helps at all.ackup software to use perhaps? Basically, my computer has had issues with it before (some that have completely stumped even my most tech-savvy friends!) and after multiple instances in the past solved only by a full re-install, I'd like to make sure it -stays- functional, without me having to wipe my drive due to some inexplicable error and fully re-install again.
View 5 Replies View RelatedWe are a small company with 15 users and we have been blacklisted in several sites for sending spam, everytime we ask for removal, they do, but after few days, we are there again. Cash flow in the company is really tight, we can not afford to pay a tech guy!
View 2 Replies View RelatedI need some help with a project, we have an app that runs on local users' machines via Terminal Services. This software needs to be able to send out reports via e-mail, but it is still in its early phase and doesn't have e-mail support built in.Are there any programs that allow sending of email in the background? I.e. without having to open outlook, and create a new message?Something similar to the way the old Linux software Ghost in the Mail worked?
View 1 Replies View RelatedI need an email server to replace Outlook express. In OEI could format the background with sounds, stationary, and graphics. What email program will do that and work with Windows 7? I have downloaded Thunderbird, Pegasus, eM Mail, and have searched through Microsoft Outlook and cannot find anything which will allow formatting the email.
View 1 Replies View RelatedI have a user who is using Outlook 2010, and intermittently recieves the error "Cannot open default email folders. Server is not available." When she receives this error, outlook closes.She is connecting to a POP3 account online, everything checks out in the "mail" settings in the control panel. Her .pst files aren't too big.I've tried a repair install, an uninstall followed by a fresh install, and updating to SP1 for Office 2010. Nothing seems to be helping, it is hit and miss when it does it, which makes it that much harder to troubleshoot.
View 3 Replies View RelatedThe audio services worked fine at first. But after optimizing the system for gaming and security, the "Windows Audio Endpoint Builder" service fails to start. It gives the error: "Error 1722: The RPC server is unavailable" This is required for the "Windows Audio" service, so I have no sound now. Does anyone know the cause of this error? Here are the services that I am running...
Application Experience: Manual
Application Information: Manual
DCOM Server Process Launcher: Automatic*
Group Policy Client: Automatic*
Human Interface Device Access: Manual
[code]....
Should I be running any additional services? I skipped Vista and am still using XP.
I just baught a HP Pavilion dv6 laptop with Windows 7 and am connected to the internet via my wireless remote. I can surf the net so I know I'm connected. I am supposed to have my email set up so that what I receive in my inbox on my desktop also shows up in my inbox on the laptop. I can send and receive fine on the desktop (Windows XP & Outlook Express), but when I try to send and receive mail in Windows Live on the laptop, I get this error messaage:
The connection to the server has failed.
Subject 'test'
Server: 'smtp.att.yahoo.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 425
Secure(SSL): Yes
Socket Error: 10060
I occasionally will receive messages, but I can never send.
When we receive emails from our server email addresses are in plain text and are not clickable. It is ok from other sources.
View 6 Replies View RelatedIve tried all the methods to make it available ND NOTHING WORKED.
View 9 Replies View RelatedI formatted my PC yesterday and now when I plugged in my WD 500GB EXHDD, The hard is giving me some error.I have made 2 partitions. One 150GB and the other 350GB. The 350GB doesn't know open giving me this error:
View 9 Replies View RelatedI've tried two different NIC's and they both do the same thing. One NIC was a PCI-E and the other is a USB. The internet just stops working, i.e. if you do a status on the adapter it says 'Internet not available.'Now! If I disable the new adapter and enable the old adapter which is a Linksys Wireless-G PCI Card WMP54GS with SpeedBooster that matched the router I had before it died three weeks ago the card works perfectly! It never disconnects from the internet so to speak.This has to be something in Windows 7 that is causing this behavior in the new adapter. I did a little snooping around myself and there was a suggestion to disable the 'IP Helper' service. I disabled it and stopped it and the adapter still 'went to sleep.'
View 4 Replies View RelatedI'm getting the following error "z: refers to a location that is unavailable..." when trying to create a Personal Safe using SpotMau.
View 4 Replies View RelatedI am trying to set up a home server with filezilla server. I am following this site's tutorial to help secure the data flow: [URL]. After doing all of this, I get an error saying "Invalid IP address/range/mask".
View 7 Replies View RelatedHave been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
I have a new Windows 7 computer and set up Mozilla Sunbird calendar program. I want to assign a shortcut Alt+Ctrl+C to it to launch the calendar. When I do that by going to Sunbird's Start Menu link, opening properties and setting that as the shortcut, it does not work. Pressing Alt+Ctrl+C does nothing. If I assign Alt+Ctrl+D to Sunbird it works fine. It does not appear to a fault of Sunbird. If I assign Alt+Ctrl+C to Notepad that does not work either. It is like something is intercepting that hotkey but then doing nothing. I found a free utility called Ethervane ActiveHotkeys that finds assigned hotkey and it says Alt+Ctrl+C is assigned (as well as the other three hotkeys I have assigned to programs.) It is not however able to say what individual hotkeys are used for.
View 4 Replies View RelatedI'm using Windows 7 Ultimate SP1 x86 with K-Lite 9.5 installed. VirtualDub 1.9.11 isn't getting access to the codecs except for Cinepak, etc.I should be using Avidemux anyway, but I can't figure out how to make desperately needed templates and last time I tried to encode a video in h264 it looks a lot worse then it's supposed to for some reason.
View 5 Replies View RelatedI restarted my computer today, and when it turned back on it came with an error message saying C:windowssystem32configsystemprofileDesktop refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Check to to make sure the disk is properly inserted.All of my desktop and taskbar icons were gone, and my desktop seemed to revert back to Window 98. When I restarted my computer again half of my icons were back, but the desktop still looked like it was from 1998. When I went into the control panel to change the theme, it changed back to my windows 7 theme, but every time I restart the computer it reverts back to windows 98.
View 9 Replies View RelatedTwo days ago i had a popup message from Mcafee but i closed it without taking a look, was kind of in a hurry. Yesterday morning, after the first reboot, windows started but nothing seems to work.
1. Many services do not start -
Workstation
Server
DHCP client
DNS client
Audio Service
HP Wireless Assistant
and many more
2. Services are missing -Network Store Interface Service (i tried to add it manually through the registry)
3. Windoes Services dependencies tab cannot be accessed, i get an error message "Win32: The specified module could not be found."
4. When i try to start services i get different messages -Workstation - "Error 1068: The dependency service or group failed to start" (this is the most common message)Audio Service - "The audio service on the local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."HP wireless assistant service - This one starts and stops after a few seconds.
5. I have no network access, nor can i connec any USB devices.
6. the "RUN" option is missing from the start menu
7. I've noticed that "bowser" was missing from the services list in the registry under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservices tried to add it manually as well, with no success
I did manage for a while to connect my mobile phone and transfer malwarebytes and combobox, but none could solve the problem. Now it won't recognice my mobile either.System restore is disabled for some reason, so that's not an option either.I can't even backup my data and prepare for a fresh installation (which is a bad option as is).
I have a Lenovo 3000 G430 Laptop with Windows 7 Home Basic Edition installed. I wanted to re-partition my 250GB hard disk into 3 logical drives. I shutdown the system and change the order of boot preference to CDRom. I had a bootable CD with me along with FDISK utility on it. I boot my laptop using bootable CD and ran FDISK to delete the existing NTFS (Non-Dos) partition.After deleting all the partitions, When I tried to create a new partition, it displays me disk unallocated space of 8GB only. After this I had tried several partition utility but all of them display disk unallocated space of 8GB only.I have run into problem. Can anyone help me find and resolve the issue with Disk space reporting less unallocated space of 8GB? while the actual size of harddisk is 250GB.
View 7 Replies View RelatedI know this issue is a popular evergreen. But I have done my best to go through this forum and all others to find advice - but this time everything I have read doesnot So once again a thread on temp accounts, HP Elitebook 8540w,Windows 7 professional x64 OEM,local network with XP computers as work group,I use the preinstalled system for a year now, automatic Windows updates were disabled in the recent days, system protected by Avast my personal account with admin rights (I call it "xxx") was on D:users with a link in C:users pointing to it (with mklink /d xxx "d:Usersxxx")this had always worked fine,yesterday my system crashed in a BSOD when loading an online 3D viewer. Not the first bluescreen on this system, but for the first time with lasting effects: when I login to "xxx" I only get a temp account (blank default desktop) and the message that the path c:windowssystem32configsystemprofiledesktop is not accessible. This is still the case. Additionally all new accounts I create start up as temp accounts with the same message. Luckily the original admin account is still alright.(all failed, logging into anything apart from "administrator" opens a temp account and brings up the systemprofiledesktop message!
View 5 Replies View RelatedI set up a Homegroup with my old PC so I could pull over my music and movies. I am able to see and copy my videos over, but the music folder keeps giving me the "refers to a location that is unavailable" error.
View 1 Replies View RelatedI have more than a 100GB of video files in wmv format on my Windows 7 partition. When I tried to look for it the other day, the folder /Users/kl/Videos/Logitech Webcam/ was no longer there. But when i searched for "wmv" it showed up in search, then then I clicked open location, it said that the location is unavailable. I know that the files are still on the disk because I have 370GB on that partition, and only 90GB is free. This was the same as when I could still access those video files so they could not have been deleted. How can I gain access to these files again? I have already tried all the instructions on this page
View 2 Replies View RelatedI'm having some problems with event viewer. When I go to open it, it gives me the "Event Log service is unavailable. Verify that the service is running." error. I've tried going through the steps Microsoft gives for creating new log files if yours are corrupted. Problem is, the .evt file doesn't exist.
I've researched the problem a lot and I do have UxStyle Core installed which is patching the files necessary to install third party themes, and I have heard that this may cause some issues with the event log, but everyone I saw undo any patching and even rollback updates, go to previous restore points, etc.
I just tried to watch a movie on Netflix, and it prompted me to upgrade Microsoft Silverlight. I saved the file to my desktop, and when I tried to open the .exe file, I got this error message from Windows Installer: The feature you are trying to use is on a network resource that is unavailable.
I tried moving the downloaded file to a different location, but it had no effect. I apparently can't play any movie now from Netflix, since I have to update Silverlight before I can play anything.
My HP Photosmart C7280 All-in-One printer is no longer printing unless I print a test page from within the HP software. I get the following message "The Active Directory Domain Service is currently unavailable" I have completely uninstalled the printer,downloaded new HP software and reinstalled the printer. I am able to scan to my PC. My other printer is fine.
View 4 Replies View RelatedWhen I try to run the event log I get the following Event Log service is unavailable. Verify that the service is running. In the services panel it is listed as running. However it is not. I have tried system restore but same issue. I don't know if it could be turned off in the registry or just what would cause this. I think the registry was modified and for some reason I have noticed certain registry entries don't always get restored if you use system restore.
View 7 Replies View RelatedFixing my elderly father's Windows 7/64 desktop. Attempting to print form MS Word to an HP3390 does not give any errors but does not print, either. Attempting to "find printer" from MS Word gives "The Active Directory Domain Services is currently unavailable." I went to services.msc to turn on that service but it does not appear in the list. Driver for the printer is already included in Windows 7, according to the HP support site. Printer is USB connected directly to the computer.
BTW Computer is running MW Word 2003 if that makes any difference.