Event Log Unavailable - Verify That Service Is Running
Aug 3, 2011
I'm having some problems with event viewer. When I go to open it, it gives me the "Event Log service is unavailable. Verify that the service is running." error. I've tried going through the steps Microsoft gives for creating new log files if yours are corrupted. Problem is, the .evt file doesn't exist.
I've researched the problem a lot and I do have UxStyle Core installed which is patching the files necessary to install third party themes, and I have heard that this may cause some issues with the event log, but everyone I saw undo any patching and even rollback updates, go to previous restore points, etc.
View 2 Replies
ADVERTISEMENT
Mar 9, 2012
When I try to run the event log I get the following Event Log service is unavailable. Verify that the service is running. In the services panel it is listed as running. However it is not. I have tried system restore but same issue. I don't know if it could be turned off in the registry or just what would cause this. I think the registry was modified and for some reason I have noticed certain registry entries don't always get restored if you use system restore.
View 7 Replies
View Related
Feb 18, 2012
I have Asuru laptop, Windows 7 64-bit with 8 GB RAM.Just bought it 5 days ago. However, recently the booting up process has been horrendously slow, taking ten minutes for even the screen to refresh.I loaded up the laptop in Safe Mode; this seemed to help somewhat. In an attempt to fix the issues, I went to Event Viewer. Was not able to access Event viewer or the information contained within it, was presented with the following message:"Event Log Service is unavailable".
View 6 Replies
View Related
Jun 15, 2011
My HP Photosmart C7280 All-in-One printer is no longer printing unless I print a test page from within the HP software. I get the following message "The Active Directory Domain Service is currently unavailable" I have completely uninstalled the printer,downloaded new HP software and reinstalled the printer. I am able to scan to my PC. My other printer is fine.
View 4 Replies
View Related
Jan 21, 2013
Windows fails to connect to system events log and events log service is unavailable.
View 1 Replies
View Related
Dec 23, 2010
The whole problem stems from the fact that my Office 2007 icons have magically disappeared, so I tried to run the Office diagnostic tool. But when I did, it mentioned an error about the event log service. I tried to go see if it was started or not, but when I did I realized that it wasn't even there. All of the registry values are present and correct so I don't know what the problem is.
View 3 Replies
View Related
May 31, 2011
My HP with Windows 7 suddenly gives me the following error message on startup: "Failed to connect to a Windows service: Could not connect to System Event Notification Service." Among other things, this prevents me from connecting to my wireless network, so I can't get on-line. Rebooting doesn't help. And the problem occurs regardless of whether I sign on as administrator or as general user.More: I can't access the Windows Help & Support pages. And I'm told to "see System Events log" for details, but when I try, it says "Event Log Service is unavailable."
View 1 Replies
View Related
Feb 20, 2011
Every time I start my computer and log in, an error message pops up when I get to my desktop:Failed to connect to a windows service.Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond.
View 3 Replies
View Related
Aug 27, 2010
I am using win 7 home basic edition.There was a power failure and could not shut down the system.when i started the system it gave me this error.Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond.i have also booted in safe mode and went to the command prompt in safe mode and did a netsh winsock reset.But still i am getting this error.
View 1 Replies
View Related
Apr 12, 2012
I have tried each and every one of the solutions on the forums and over here. All my drivers are up to date (double checked), I rolled back and uninstalled all updates, Did sfc /scannow three times and they passed without any integrity violations. I've tried netsh winsock reset as well. The aero is gone, greyed out plus I can't select any other theme and whenever I start up the computer it displays the message "Could not connect to a Windows service".This started happening about 2 months ago when my laptop ran out of battery in hibernate mode. It didn't resume so I had to press the power button again and then it took about 8 minutes to boot with nothing but a black screen and the mouse there. The audio service isn't running every time I boot up (I have to right click and run troubleshooter to start it). I'm using Windows 7 Ultimate on a Sony Vaio VGN-NW25GF. Intel Duo core T6600 and the ATI Radeon HD Graphics 4570 card.
View 1 Replies
View Related
Jan 15, 2013
Microsoft reports that "The Service is unavailable." I have tried to access my Hotmail account in FF and IE9, no success. Anyone else having this problem, or is it just the UK? Or even just me?
View 2 Replies
View Related
Sep 10, 2012
windows could not connect to the system event notification service this problems prevents standard users from logging on to the system as an administrative user you can review the system event log for details about why the service didn't respond)this is the message I keep getting when I do a restart on my laptop.I went to the component service > services (local)> system event notification.. then I click on the event viewer (locals) it gave an error message.
View 2 Replies
View Related
Aug 5, 2012
So recently I had hardware issues, and through warranty I had several replacements done. Mobo, Video cards, ram sticks, and the power supply. After all that was fixed and replaced my computer seemed to have ran fine for a few days, and it still technically is except for this problem.The problem is when I log in into windows normally it takes a while for Windows to boot up. I get a "Please wait" screen, then after a long 4 minute log in once inside windows I get the"Windows could not connect to the system event notification service", and the toolbar is grey all old school windows like.
[url]...
In services the service is called System event notification, it says that the service is running fine. Even when i try to restart it, it makes no difference at all.
View 9 Replies
View Related
Sep 5, 2012
This Error popped up on my Screen today My Nvidia control panel, among other programs do not seem to start with windows any more ( i noticed this right away because my screen configuration had changed)I have checked the service and all of its dependencies and all of them are working fine.
View 9 Replies
View Related
Oct 13, 2012
In an attempt to log on to Windows 7, I could not get to the desktop and the error message: "Failed to connect to a windows service. Windows could not connect to the System Event Notification Service." It also, said, "Location is not available: C:Windowssystem32configsystemprofiledesktop." I ran system restore and was able to get the desk top screen, however, nothing responded and in an attempt to shut down, I had to hit control/alt/del which now has me stuck in Logging off.....
View 4 Replies
View Related
Feb 22, 2012
It started less then a month ago and I can't figure out what is causing the issue. I've looked over Event Viewer, but can't seem to get answers on specifics over the net.
Quote: Event Viewer Issues;
2:02:05 The PnkBstrB service entered the stopped state. EventSourceName="Service Control Manager"
EventID Qualifiers="16384">7036</EventID
Keywords>0x8080000000000000</Keywords
EventRecordID>261885</EventRecordID
[code]......
View 1 Replies
View Related
Nov 13, 2012
i have been getting this warning for ages now event id 4001 WLAN AutoConfig service has successfully stopped.
System
- Provider
[ Name] Microsoft-Windows-WLAN-AutoConfig
[ Guid] {9580D7DD-0379-4658-9870-D5BE7D52D6DE}
EventID 4001
Version 0
Level 3
Task 0
Opcode 2
Keywords 0x4000000000000000
- TimeCreated
[ SystemTime] 2012-11-12T13:34:36.929908100Z
EventRecordID 12133
Correlation
- Execution
[ ProcessID] 140
[ ThreadID] 2736
Channel System
Computer Mark-PC
- Security
[ UserID] S-1-5-18
EventData
and i think its to do with my wireless card, i have disabled it from adapter. at least i think this is what it is.also i keeps getting this one as well event id 315 The print spooler failed to share printer HP Photosmart 2570 series with shared resource name HP Photosmart 2570 series. Error 2114. The printer cannot be used by others on the network. this is my printer but i do not have it connected all the time i pack it away when am not using it.
View 4 Replies
View Related
Apr 30, 2012
* Boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute
> sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* Occasionally the audio service does not work as well...
From when I press the power button to when I can actually use my computer takes 10 - 15 minutes.
View 14 Replies
View Related
Apr 22, 2010
My computer recently started having issues........ here is what is going on:
* boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute > sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* Occasionally the audio service does not work as well...
From when I press the power button to when I can actually use my computer takes 10 - 15 minutes. Here is what I have tried so far:
* Turning off all start up programs / services
* Uninstalled AVG anti virus
* PC Tools Registry mechanic registry clean up
* Tested Memory - passed
* Hard Drive Self Test ---- # 1 - 7 fail / #10008 Fail > I am guessing that this is the source of the problem, however my computer does still work once everything is finally booted. So I don't know what to do with that information or if that test even matters.
* I have tried looking at the event viewer but every time it says that the event log service is unavailable > I try turning on Windows Event Log but that does not change anything
* I tried "netsh winsock reset" in command prompt, based on a different thread that I found - it didn't work
Possible useful information:
Windows 7 Professional x64 upgraded from vista
Avg Anti Virus
PC tools Registry mechanic
HP pavilion dv2000 (dv2915nr)
Intel Core 2 Duo: T5550, 1830 Mhz
4gb ram upgraded from 3 gb
View 2 Replies
View Related
Oct 1, 2012
im new to the forums and my audio service says it is not running. i've gone onto services.msc and it says windows audio endpoint builder has started but when i try to start windows audio it says windows cold not star the audio service on local computer. Error 1079: the account specified for this service is different from the account specified for other services running in the same process.
View 1 Replies
View Related
Oct 16, 2012
on windows 7 ultimate 64 bit windows update says the service is not running and try restarting computer but that makes no difference
View 1 Replies
View Related
Oct 25, 2012
I always use wired network on my laptop , coz i didnt have any wireless network at home, but sometimes i use my wireless network so its working properly back then, one time i bring my laptop at office, and try to connect it via wireless and it seems i cant detect any wireless signal, i try to use troubleshooting so i can see whats happening, i just got a message saying "diagnostic policy service is not running" then i just look at my network adapters setting , i just turn them all to enable, including bluetooth, i just see one new adapter "virtual adapter" i think this comes from installing android via virtual box, i try to disable it but no luck, i try all what i read on google search, but all is no luck, one last thing i didnt try is to uninstall my driver and go to repair options on windows 7, my original cd is professional, but i upgrade it to ultimate, i didnt know if the repair disk will work. please any help. i do not want to have a clean install of OS
WINDOWS 7 X64BIT ULTIMATE
Samsung NP300E4A - S0CSA
INTEL I5
6GB RAM
1TB HARDDISK
NVIDIA GEFORCE GT 520MX
Attached Files
Capture.PNG 62.22K
2 downloads
View 14 Replies
View Related
Jun 28, 2011
Iam using windows 7, Core I5! X64 based notebook pc! Today i downloaded IE9, when i run the setup, i get a error ' cryptographic service not running, please check events log.' But cryptographic is running.
View 2 Replies
View Related
Dec 20, 2009
I am not sure if this problem is due to a user account issue or a printer issue.
I cannot add a printer and all my printers from Windows XP were wiped out. I use this machine for business and I did not want to do a file and settings transfer so I updated to Vista and then updated to Windows 7 from there.
I had a bunch of printers installed including a couple of wierd ones such as a FileCabinet Printer, Adobe Acrobat Writer, CutePDF writer, etc. I don't know if these strange printer drivers affected the upgrade but now I cannot add a printer. I tried services.msc and attempted to start the spooler service, it usually is already running and its on automatic. Its not that, its something deeper than that. I also right clicked the spooler service and made sure the check box was checked for allowing the user to interact with it.
I found a Microsoft post for XP: You cannot add a printer and you receive printer spooler error messages in Windows XP
View 9 Replies
View Related
Sep 4, 2009
On occasion when i boot up im getting a red cross on my volume control in the tray and hovering over it it says the "audio service is not running" but the service is running, i get sound and everything is working fine. Looking at the services i find windows audio service and yep its running fine & set to automatic but there is still the red cross in my tray?at the moment im having to "restart" this service to get rid of the notification and the red cross but its a pain.
View 9 Replies
View Related
Nov 24, 2012
Whenever I try to run Windows Update it comes up with a dialogue box that says "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." I believe my computer is Windows 7 Home Premium 32bit. I've tried a lot of the fixes that have been posted, but none of them worked. I tried running an SFC (I think that's what it was called, sorry I'm not very computer smart), rebooting my computer, and doing a system restoreAlso, Windows Update doesn't show in services.msc. I saw one post that said something to do with Windows Security Center can make Windows Update do this, but my Windows Security Center doesn't work either. Whenever I try to turn it on, it says "The Windows Security Center service can't be started." Windows Security Center is also not in services.msc for me. I know that Windows Update worked 2 months ago, but that was the last time I tried using it
View 1 Replies
View Related
Sep 10, 2011
My toshiba laptop has been telling me my anti virus cannot be run when I scroll over the wireless icon it says I am connected but only through limited connection, meaning I can't get onto the internet at all. I didn't shut anything off on my computer so if anyone knows how to get this "diagnostics policy service" to run again
View 5 Replies
View Related
May 31, 2011
I have high DPCs when the POWER service is running. If I turn it off, the DPCs go back to normal. Why? What is this trying to run that is causing this?OK, U can't tell. How can I troubleshoot this now that I know the culprit?
View 3 Replies
View Related
Aug 25, 2011
I have a two month old, custom built desktop running Windows 7 and last Friday, without any seeming provocation, my wireless network disappeared. My computer is completely unable to see any wireless networks. My router is working fine (I'm using it to post this from another computer), and my wireless adapter works perfectly (again, using it to post this). When I ask Windows to diagnose the problem, it tells me that the Windows wireless service is not running.After much research and several sfc scans, I can safely say that it appears to be a registry issue. System restores, both by Windows and from backups have failed to correct the errors. I've seen several possible solutions like:Run CMD as Admin... netsh winsock reset catalog netsh int ipv4 reset "c:eset.log" netsh int ipv6 reset "c:eset.log"andWindows wireless service is not running on this computer - Microsoft AnswersandGo into the registry with regedit for this:[CODE]
View 6 Replies
View Related
May 31, 2011
I have high DPCs when the POWER service is running. If I turn it off, the DPCs go back to normal. Why? What is this trying to run that is causing this? Windows 7 ultimate x64.
View 1 Replies
View Related
Nov 4, 2011
My Windows Installer service has stopped running and it wont run again
View 2 Replies
View Related
