When I try to find Backup and Restore in my computer I fail to find it. I tried to load it using Command Prompt "%SystemRoot%System32control1.exe /name Microsoft.Backupandrestore" and the page shows blank with the note "The page failed to Load" I have Acronis installed on my computer.
View 12 Replies
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedMy Dell Studio 17 shut down yesterday after sitting idle. Now i cannot boot windows. I get this endless loop that ultimately leads me to startup repair which either hangs or errors out. Attempting to start in safe mode takes me to same place.I know the root of the problem is bsod as I see it flash when attempting to load windows.I was able to launch system restore tool from advanced options (f8) but after selecting restore point the cpu seems to hang after over an hour of Initalizing.I can bring up command prompt by the way.
View 3 Replies View RelatedWindows 7 X 64 fails when trying to load MS updates. I have Malwarebytes and MS essentials installed. Security updates for MS.NET are successful as are Definitions for MSE, the Bing Bar updates and even updates for Office 2010 (even though it is not loaded on my computer) but none of the Security Updates for Windows 7 x64 based systems will load. Every bootup for weeks it says - you have 37-40 updates. If I tell it not to update, sometimes, somehow, it does it any way and in the middle of my word processing a box pops up that is counting down to a reboot. If I don't walk away it just shuts down in the middle of my typing. If I ignore the "updates available" it changes my log off box from "shut down" to load updates and shut down.
If I don't pay close attention and change the default back to "shut down" each time I get stuck loading all the same updates that didn't load the day before. Of course if I tell it to load updates it will finish and then wants to shut down. During shut down it spends a very long time loading definitions? Then when I reboot it spends even longer trying to load updates. I must walk away. This ties my computer up for a very long time and then always has to run "start up repair" to get the PC to boot after loading updates. Every once in a while start up repair fails and the only way to use my computer is to "reset to an earlier date before the latest updates". Of course then it insists I need the updates once more! Including the ones that DID load once successfully.
I don't understand about firewalls and if I have one it is probably the default that came with MSE. (Windows also has one?) Malware bytes is not set to automatically update and run and I manually run it every few weeks but the machine always comes up clean. I downloaded and ran KB947821 System Readiness Tool but it did not improve the situation. I disabled MSE and was able to load all the security updates successfully in batches but every time I tried to load an update for win 7 x64 most of them failed, i.e KB2506014, 2533552, 2641690, 980408, 2506014, etc. Something must be blocking some of my MS updates and letting others through. I heard there was a service pack for win 7 but I hesitate to try and download it as it will probably just freeze my computer.
I have an ASUS laptop which used to have a recovery partition. I used a function to make recovery DVDs and proceeded to format the partition.Well now Windows won't boot. I attempted to use my recovery DVDs but after taking 10-15 minutes to boot it loads to a screen with a graphic (wallpaper) and stays there.It doesn't tell me to load the next disk, it doesn't give me any kind of menu, does not accept any kind of input (including ctrl-alt-del).
View 1 Replies View RelatedI'm running Windows 7 x64, JDK 7 U4 and the Java plugin just won't work correctly in any browser, be it IE9, Chrome 19, or Firefox 12. Both the Java installation and the browsers are 32-bit versions. The browsers simply hang or display nothing when a Java applet is supposed to load.I do Java development, so I need the JDK.I have tried everything it seems. Completely removed the JDK and reinstalled it, tried both JDK 7 U3 as well as whatever the latest version of JDK 6 is, tried with just the JRE, but the problem is still the same. I also used a tool called JavaRa to completely remove any remnants of Java before re-installing it.The Java plugin seems to be correctly listed in all browsers (for instance in "about : plugins" in Chrome), with the correct version, too. In Control Panel -> Java, I also have "Enable the next-generation Java Plug-in" enabled.Apart from the browser issue, Java seems to be correctly installed, as I can run "java" or "javac" from a command prompt and it will give the expected output. I am also able to compile Java source files as well as run Java bytecode without issues.A few times I have been able to get it to work in a browser. All of these times were directly after a fresh installation of the JDK/JRE, but then it seems to stop working after a short period of time.
View 13 Replies View RelatedOld office computer:
Dell E510
P4 3.4 GHz
4 GB RAM
Radeon x800 PCIE
Crucial M4 SSD 120 GB
Windows 7 x64
New internals:
CPU: AMD A4 5300
Mainboard: MSI FM2-A75MA-E35 FM2
8 GB RAM
Corsair 450 watt PSU
Cheap Cooler Master Case
After assembling the new computer, I ran it without the system disk installed to make sure everything was kosher, and memory timings, etc. were correct. After verifying that, I shut it down and put the SSD into the new unit and booted it up. The system posts fine, but once the Win 7 startup image shows, the system restarts and brings me to the "start windows in safe mode/start windows normally" prompt.
Although originally working, now W7 backup will not work.I am running 32bit UltimateI have emptied the backup drive,started a whole new backup - the back up starts ..uns to about 80% of progress bar ... then fails with message Backup failed to omplete.The error code is ox81000015This says that Windows could not zip a file... and to remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails
View 7 Replies View RelatedI have a Dell Inspiron 1721 connected to a new Seagate external hard drive.The Inspiron has 280GB of which 85 are free.The Seagate has 465GB with 445GB free.Several times I have attempted to back up the Inspiron and so far have been unsuccessful.The message I get is:Your last backup did not complete successfully.Windows Backup could not create a zip file. This could because the drive that Windows is installed on does not have enough space, or it could be a temporary error. Make sure you have at least 400MB of free space and try again.
View 1 Replies View RelatedAlthough originally working, now Windows 7 backup will not work.i am running 32bit Ultimate.I have emptied the backup drive, the back up starts ... runs to about 80% of progress bar ... then fails with message Backup failed to complete.The error code is ox81000015.This says that Windows could not zip a file ... and remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails.
View 9 Replies View RelatedWindows 7/64 SP1
I have an external drive H: attached (2.2 TB NTFS partition). The drive is practically empty.
Today I wanted to do a full backup of the system. After a while it says that the last backup did not finish successfully (translated from German).
[code]....
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedPeriodically I have problems loading the Gmail inbox from an IE8 favorite, if using Gmail "standard view". Gmail "basic HTML" view doesn't have the problem. Likewise Firefox 3.5.5 nor Chrome 3.0.195.33 have the problem in either Gmail standard of basic view. IE8 version: 8.0.7600.16385. Happens with both 32-bit and 64-bit IE8.
Problem only happens if loading from an IE8 favorite, not if manually going to Gmail and logging in.
Typically the problem manifests as an indefinite wait while loading Gmail. However sometimes one of the following two errors happen:
""We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects."
OR error loading page (yellow icon on IE8 status bar), where error details are: Read more at the forums...
There's more than one thing wrong with the Windows 7 Backup. First, it has never worked and it fails in every attempt at backing up. Second, MS failed to provide adequate information or diagnostic tools to explain just why it isn't working! It's pitiful.My issue is that even though Windows 7 64-bit Professional "sees" and utilizes my External Western Digital "Elements" 500GB (ntfs) harddrive, Windows 7's Backup utilility fails to find that drive when I backup to it, even though that same dialog SHOWS the external drive! Its error message says something to the effect of: "path not found". And, although I have to wait 40 minutes for it to supposedly be backing up data, it fails! If it cannot find the path, it should say that at the beginning... not 40 minutes later!
My system:
MB: ASRock Z68 Extreme 3 Gen 3 * CPU: Intel Corei5 (2500K) * GPU: Intel Onboard * SOUND: Onboard * CPU COOLER: CoolerMaster Hyper 212 Evo * PSU: Seasonic X650W 80+Gold * RAM:G.SKILL Ares Series 8GB-F3-1600C8D-8GAB * CASE: LIAN LI PC-A70F ATX Full Aluminum Tower OS: Windows 7 Pro 64-bit * BROWSER: IE9 It won't do a full backup. It won't do an "image" backup. Nothing. I don't know why.
Windows back-up doesn't work well. I tried it twice and it just says it failed - no reason given. I am not interested in 'cloud' back-up.
View 2 Replies View RelatedI have been trying for a few days now to get Windows to do a full backup of my new PC. For some reason it just wont finishI thought perhaps it was due to other active programs so I shut down everything else that was running, still Fails.Thought it might be a power issue so I set all the options to never shut down, never sleep, never hibernate, and the backup still fails.And now when I try to run a backup it tells me that it can't find the drive that the backup is set to use. But I can browse the drive fine through windows explorer?
View 1 Replies View RelatedJust installed 64-bit Win 7. Everything works well except backup fails. The error is "Away Mode". Unlike Vista, not way to turn Away Mode off.
Suggestions? 3rd party utility? Trick? MSI board in HP desktop - now way to get to BIOS to turn off.
I am trying to make a disk image in Win7 to a partition on my USB HDD.The partition is a freshly formatted 116GB. Win7 says the backup image will require up to 45GB. Yet when the backup process begins, it returns an error message saying there isn't enough disk space for the image.This is apparently a bogus message because I have saved other backup images of this PC to that partition in the past. In fact, I just re-formatted that partition to remove an older image of the same PC (same approx. size image) so I could save the fresh image to it. Can anyone tell me why Win7 insists there's not enough room on a clean 116GB partition for a 45GB image?
View 3 Replies View RelatedOkay, so I load up the screen, and it says "Windows Error Recovery"Windows failed to start. A recent hardware or software change might be the cause.And it has options for...Launch Startup RepairStart WindowsI tried the Launch Startup Repair, but it gets stuck at the screen, and nothing pops up. Theres just a mouse.And if I hit Start Windows, it all goes well, but then after it starts windows, before I get to the login screen, it quickly flashes to a blue screen with text on it for a few milliseconds, and then just goes ALL the way back to the Windows Error Recovery
View 1 Replies View RelatedFujitsu Siemens laptop, Intel dual core, 1.75g ram. When I restart it, fails to load and doesn't even show to startup screen, nothing, just a black screen. so, I must shut it down from the power button. And if I start it rapidly, it's possible to not start from the first try. I made a fresh install of the OS, nothing. Can this be a hardware problem?
View 4 Replies View RelatedI attempted to backup my systems the other day when I recieved an error code. After searching this forum, It was determined that the code made reference to the fact that a necessary service was not running, in this case the Task Scheduler.I have used the Services program (as an administrator) to attempt to restart this service, but in the properties every option in grayed out. I have checked and all dependant services for the Task Scheduler are running normally. I have run the checkdisk utility from the command prompt, and it did fix some corrupted files, but even after that the options are still greyed out.
View 8 Replies View RelatedOk, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View Related7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies View RelatedI switched my medion akoya i3 1tb (running windows 7) pc on this morning and up popped startup repair. When it had finished it gave me the option to do a system restore which I tried to do but then I got a message saying
"system restore did not complete successfully. Your computer's system files and settings were not changed.
Details: system Restore failed while deleting the following file/directory
D:windowssystem32catroot{F750E6C3-38EE-11D1-85E5-00004FC295EE}Package"
I dont know what to do as I cant get my pc to startup properly
I have tried to restore my system to an earlier state to remedy the faulty uninstallation of a speech recognition programme, which tries to reinstall every time I start the computer. System restore restarts the computer but then tells me the restore process failed, once i am back to my desktop. OS is Windows 7 Home Premium and computer is an Acer Aspire laptop. System partition is encrypted using Truecrpyt.
View 3 Replies View Relatedfor backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View Related
