W7x64 Install, Will Not Boot After Enabling RAID 0
Oct 13, 2009
I just bought a refurb Dell XPS 420 w/ Q9300, running Vista Home Premium x64 and downloaded/installed an activated version of Win 7 Ult x64 on an 80GB SSD [Sata1] I bought for it; dual booted w/ Vista x64 on old hard drive [Sata0].
Windows 7 x64 was running stable and instantly fast, I wanted to enable RAID0 on the old hard drive [Sata0] and another new hard drive [Sata2]
I entered Intel Maxtrix Storage Manager (Ctrl-I), creating a RAID0 volume on [Sata0] and [Sata2].
After reboot, it says "No boot device available" after BOIS screen.
My subsequent boot attempts include (roughly in order):
1. disable RAID0 volume, boot to [Sata1]
2. disable [Sata0] and [Sata2], boot to [Sata1]
3. disable [Sata1], boot to CD/DVD-drive (Windows 7 install/boot)
4. disable CD/DVD-drive, boot to USB flash (Windows 7 install/boot)
I have done some digging around and cannot seem to find a solution. I have the use of my notebook (w/ broken DVD burner, still reads) running Windows 7 Ult x86 so apparently I cannot make my USB flash drive x64 bootable from what I've read. I also have 2-USB hard drives (80/250GB) and an eSata 2x docking station available, but no eSata on notebook.
Hope I gave enough info for someone to come up with an easy fix. If I could boot to the Windows 7 x64 install DVD that I made with the non-booting PC, I would have just done a clean install by now, but it refuses to boot to the CD/DVD drive. It actually wouldn't even boot to DVD to install Windows 7 x64 in the first place, I had to install from Vista. Also I do not have a Vista x64 install disk either.
View 2 Replies
ADVERTISEMENT
Jan 19, 2009
Clean installing Windows 7 x86 is no problem. But
1) upgrading Vista x86 to Windows 7 x86 fails and automatically rolls back to Vista, and
2) attempt to clean install Windows 7 x64 results in BSOD when rebooting to finalize the process.
Any suggestion would be appreciated.
View 3 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Dec 6, 2009
Given the limited options, what is the best,trouble free email client to use when having to transfer files from XP using Outlook and/or Outlook Express?
View 2 Replies
View Related
Oct 25, 2009
I'm making a post as a W7x64 install is driving me nuts. During Windows 7 setup, at the F6 prompt, I've loaded the drivers for the Southbridge to enable SATA hotswapping and NCQ'ability.
When I set the BIOS to ACHI mode the Windows 7 installation fails to complete, during the first reboot within setup Windows 7 will report a hardware fault and refuses to reboot.
When I set the BIOS to IDE mode the installation goes fine, but there's no sign of hotswap or NCQ onboard.
All my SATA drives are in SATA-II mode (Barracudas, 1x 80Gb boot, 2x 1Tb archivage, 1x 500Gb misc') so this isn't the cause, and they're all connected to the orange/yellow main bank of six SATA ports (there is nothing attached to the purple Gigabyte chipped twin headers).
I've already swapped out all the SATA cables and chkdsk'd the drives, and verified the integrity of the Windows 7 DVD.
My board had the original BIOS when I checked, so I upgraded to version F6. Alas nothing has changed. Other components are a Palit HD4850 Sonic graphics card, 8Gb OCZ 1,333Mhz RAM, plus a modest Intel Q9300 2.5Ghz CPU.
If anyone has experience of loading the Southbridge ICH10 drivers under Windows 7 and can spare me an explanation I'd be very grateful.
View 9 Replies
View Related
Dec 26, 2010
My PC is setup with two hard drives as RAID-0 (1 partition) and it has refused to boot Windows 7 for the past few days. The computer simply shows a black screen after it goes through the BIOS screens. Pressing F8 to enter Safe Mode does not work at all.This issue has arisen after I tried installing a video card (XFX Geforce 8800 GTX) without uninstalling my old video drivers. It's still a mystery to me how installing the card would cause problems with Windows or my hard drivesHere's what I've done so far to troubleshoot:I created a System Recovery boot disk because I lack the original Windows 7 installation cd. System Restore does not work, nor does the Image function. System Repair simply hangs for an unbelievable amount of time.
After scanning my hard drives for various info, I found out that my first hdd is listed as NTFS, yet my second one is RAW. Subsequently, the C: drive is also listed as RAW, and I cannot use Chkdsk.exe on it. Through a cmd prompt, I used Bootrec.exe /FixMbr and /FixBoot, but it did not seem to fix the issue. I also used Bootrec.exe /ScanOs to see if the Windows 7 installation still existed, yet it came up with nothing.I've managed to use a program called RAID Reconstructor, via a PE Builder boot disk, in order to copy all my hard drives' sectors over to my external hard drive. The external is now hooked up to a second PC that I'm using to troubleshootIt seems that all of my personal files are intact and working perfectly fine, and the file names are also correct. I don't really know how to check my Windows/System32 files for corruption.I'd like to fix Windows 7 without having to format the hard drives. Since I lack the Windows 7 installation cd, I can only install Windows XP while lacking 64-bit support. Since I'd like to avoid this, I was wondering if there was a way to get Windows 7 back up and running. But I suppose this isn't possible without getting my second hdd back to NTFS format.
View 2 Replies
View Related
Feb 18, 2012
my goal is to boot windows 7 x64 with raid-1. My boot drive is a SSD, which is not part of the raid array. I have 3 seagate ST2000DM001 that I want in raid-1. I have tried installing windows 7 with ahci in bios first but no luck. I was able to boot from raid1 when I started bios out in raid but my ssd drives read/write speeds significantly decreases.
View 3 Replies
View Related
Jan 9, 2013
I purchased 2 500gb hdd's for a raid 1 setup. I already have a 128gb SSD with my operating system that i plan to leave untouched. i simply want to install games onto the hard drives in raid 1.
I have an m5a99x evo motherboard by asus. My problem is that whenever i turn on the raid in bios, press control+f, and set the 2 drives in raid 1, windows 7 cannot boot. If i select the restore, i cannot access my system image from my external hard drive and it cannot solve the problem on its own.
View 2 Replies
View Related
May 9, 2012
in my PC there are some drives with RAID0 arrays and from little time I have bought a SSD for Operative System (Windows 7).in your opinion (on the BIOS) is it better making the Boot with SSD or with another drive with RAID0?
View 9 Replies
View Related
Jul 8, 2011
I have a 6TB raid array consisting of 2 3TB drives. I have the latest Motherboard with EFI bios. The Intel RST utility allowed me to set up this array, and it says it is bootable. I would like this to be my C: drive.
How can I get Windows 7 to install and boot from this array.
View 21 Replies
View Related
Jun 14, 2012
I just recently purchased a SSD (OCZ Vertex 3 60GB). I wanted to use it for Intel RST with my 500GB HDD. I went into BIOS and changed to RAID and i installed my OS. Everything was fine so I installed all the important drivers and reset. When it booted up again the RST sign came up and i accelerated my drive. Then when i reset my system it says "BOOTMGR is missing". So i poped in my windows recovery disk to try and fix it but the windows doesnt detect my drives.
MOBO: GIGABYTE Z68X-UD3H-B3 REV 1.3 SOmetimes when i switch to AHCI then it will boot
View 4 Replies
View Related
Nov 27, 2010
I have W7 installed, works fine. I bought 2 HDDs and wanna add them just as data disk and set up as RAID1. If I set up RAID in bios, Windows crashes when loading with classic blue screen + restart. Is there any way to make it work (install some driver etc.) or do I have to reinstall Windows with RAID set up prior to Windows installation? I have Asus P7P55D-E board.
View 1 Replies
View Related
Jan 4, 2010
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
View 4 Replies
View Related
May 29, 2009
I want to slick my drive and do a clean install of the RC version. I currently have a Raid 0 configuration on 2 additional drives (not the OS drive) using the Asus P6T on-board controller. Will that Raid be preserved and thus the data as well? What is the best way to accomplish this with the least amount of angst?
View 4 Replies
View Related
Dec 5, 2009
Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
View 9 Replies
View Related
May 31, 2010
I want to set up a raid 0 during the install for my c partition on Win 7 can this be done? If not what I will do is install on a parition on one drive and then after I have installed set up some stripped partition and hack the registery and change the locations of the Windows folder to be on the stripped partitions after copying them of course. This is just not a very nice way of doing it. My mobo doesn't support hardware raid so that is why I am trying to implement software raid and I have a second hardrive.
View 9 Replies
View Related
Apr 20, 2012
I have install xp on raid striped but when i try to install win 7 the driver i have are not the correct ones i have a dfi lanparty tu p45 t3rs mb and two wd 500gb hdd. i have looked around but cant find any others anything i can do or anone know where i can get driver
View 2 Replies
View Related
Mar 23, 2011
I know this is probly a question asked before, but I have two 1.5tb drives I would like to set up in RAID 0. What is the largest size RAID 0 Windows 7 Home Premuim will support for a boot?
View 9 Replies
View Related
Mar 30, 2012
I7-950
HD6970
6GB corsair XMS 3 1600MHz @1066
DRIVES-
OS- 2 x corsair force 3 60gb SSD running RAID 0 on Sata 2 ports
SEPARATE to OS drives- 2 x corsair 60gb in RAID 0
1x WD 320gb
1x WD 1TB
Cooler master silent pro 850
all the drives are functioning, intel software isnt reporting any drive issues, basic drivers are up to date.
View 4 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
May 31, 2011
Running Windows 7 Ultimate x64. I have setup a partition which I transfered from on drive to another and now my boot partition is on an SSD Raid array connected to an LSI 9260 controller. If I boot the computer with the RAID Array first, the computer will just hang there. No message no nothing after the Verify DMI success message. If I setup my computer to boot from CD first and the the RAID Array second and with a bootable CD in the drive, the BIOS will display the "Press any key to boot from CD" If I don't touch anything, then windows will load just fine when the boot sequence switches to the RAID Array.
View 3 Replies
View Related
Feb 6, 2010
After flashing the bios, my computer could not find the OS. The options displayed recommended that I try to repair the OS, so I made that selection with no joy. I went into the bios setup and found that it was no longer setup for my raid 1 drives, so reconfigured. When I did this, I missed setting the SATA 4/5 to IDE and went through the process again of trying to repair the OS. Once again, that did not work.
I went back into the bios and discovered my oversight, fixed it, but the computer still does not recognize my raid drives. The raid bios setup utility still shows a valid array. At this point, my assumption is that it doesn't recognize the array drive because the driver isn't loading, so I've tried to reload the drivers. The motherboard manual only describes how to do this when installing a new operating system and I do not want to lose my programs. Do you have any suggestions?
View 1 Replies
View Related
Nov 20, 2010
My PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?
View 1 Replies
View Related
Jun 11, 2009
My first post here, and I was just wondering if there was a way to integrate raid drivers in my windows 7 installation CD?
View 9 Replies
View Related
Dec 22, 2010
MOBO = Gigabyte x58a-ud5 I just got 2 SSDs I'm trying to put in RAID0 and hopefully clone my current install. When I change the bios settings to set the intel RAID controlled to xhd and raid but try to boot from my windows installation it wont boot, it gets to ''starting windows'' and then BSOD. When I turn the RAID setup off and try to install the XHD drivers the install aborts saying ''this is not a RAID setup". Is there something I can do to get the drivers installed on my current setup then clone it to the RAID drives?
View 1 Replies
View Related
Jul 14, 2009
I got this problem and cannot solve it myself for over a month, ANY advice will be appreciated! The goal is Windows 7 64bit with RAID0.
1. Windows XP 32bit installs fine on RAID0 (with proper driver integrated)
2. Windows 7 64bit and Vista 64bit installs fine on single drive.
3. Windows 7 64bit and Vista 64bit on RAID0 give BSOD 0x000000F4 during completing installation stage, then Matrix Storage manager shows RAID0 ERROR OCCURRED.
EDIT:
4. Windows Vista 32bit won't install on raid setup too. Its not the case with 64bits
I tried everything I could think of:
1. exchanged both hard drives
2. tested RAM
3. tried install with minimum pheripherals and 1GB RAM
4. messed up with BIOS, even updated to latest beta bios
5. tried installing intel vista64 raid drivers, tho windows 7 has itself
6. RMA'd my DVD Drive
and still NO GO
E7200 || Abit IP35 Dark Rider || A-Data 4GB || 4850 || X-Fi Gamer || Samsung F1 RAID0 || Pioneer DVR-212 || Corsair VX450 || HP w2207h
View 3 Replies
View Related
Jun 11, 2011
I would like to get 2 SSDs and put them into a raid array using Windows 7-64bit, but wanted to make sure I understand how to do that. The 2 SSDs will be the only drives in the system. My computer has an X58 motherboard with an ICH10R. Here is what I think is the correct procedure: Boot into the bios. Set the storage config to RAID (the other choices are IDE and AHCI) Reboot and hit Cntrl-I to get into raid menu during boot. Set up the raid array in the setup screen. Reboot to the Windows 7 install CD and install Windows Is this correct? Are there any other steps I need or tips I should be aware of?
View 9 Replies
View Related
Sep 12, 2011
i want to change my existing install too raid0 i currently have install/programs on one 1tb drive and media/games on another 1tb drive, i have a spare 2tb drive unusedwhat are your suggestions so i reduce the amount of lost programs etc
View 4 Replies
View Related
Jun 16, 2011
I'm trying to do a fresh install of windows 7 and it wont recognize my hard drives. I've done some research and determined i need the correct drivers, but i don't know which ones. I'm trying to install them on 3 WD3000HLFS in RAID 0. The HDD are plugged into SATA 6 ports( only 2 SATA 3 ports on the mobo).
View 4 Replies
View Related
May 26, 2012
I have been trying to get windows 7 Ultimate 64 bit installed onto a raid I created with two ocz agility 3 ssds. Everytime I try loading the drivers at install it gives me an error stating the drivers are unsigned and to install a 32 bit OS. When installing a 32 but OS, the install works normal and the computer runs fine. I am just wondering why it wont install for 64 bit considering I would much rather run 64 bit. I went to both the MoBo's website and the main companys website for the chipset drivers (AMD) but have both turned up with the same error.
MoBo = Biostar TA75M
CPU = A6-3650
2x OCZ Agility 3 60gb SSDs (2.22 firmware)
View 1 Replies
View Related
Aug 23, 2012
I have 3 driver onmy compute. which worked as 1 when playing games ex. got a virus o the shop cleanedor me.Btwo driver wrks at a time. And i need all 3working to play games. pc worldused to do it bu not ay more.
View 1 Replies
View Related
