Windows 7 Doesn't Boot When In Raid 0
Jun 14, 2012
I just recently purchased a SSD (OCZ Vertex 3 60GB). I wanted to use it for Intel RST with my 500GB HDD. I went into BIOS and changed to RAID and i installed my OS. Everything was fine so I installed all the important drivers and reset. When it booted up again the RST sign came up and i accelerated my drive. Then when i reset my system it says "BOOTMGR is missing". So i poped in my windows recovery disk to try and fix it but the windows doesnt detect my drives.
MOBO: GIGABYTE Z68X-UD3H-B3 REV 1.3 SOmetimes when i switch to AHCI then it will boot
View 4 Replies
ADVERTISEMENT
Jun 27, 2012
I had an existing properly working system consisting of a SSD 64GB for my OS and a Raid1 config with two 1TB drives for data. My SSD ended up being to small as certain programs do not let me remap content to a separate drive. I have upgraded (swapped out) to a 240GB SSD reinstalled windows on it and windows does not see my raid1 in disk management, nor does it see my two monitors or my connection to my router. It was my understanding I could just swap out the SSD's and reinstall windows and it would see everything.
View 4 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Dec 26, 2010
My PC is setup with two hard drives as RAID-0 (1 partition) and it has refused to boot Windows 7 for the past few days. The computer simply shows a black screen after it goes through the BIOS screens. Pressing F8 to enter Safe Mode does not work at all.This issue has arisen after I tried installing a video card (XFX Geforce 8800 GTX) without uninstalling my old video drivers. It's still a mystery to me how installing the card would cause problems with Windows or my hard drivesHere's what I've done so far to troubleshoot:I created a System Recovery boot disk because I lack the original Windows 7 installation cd. System Restore does not work, nor does the Image function. System Repair simply hangs for an unbelievable amount of time.
After scanning my hard drives for various info, I found out that my first hdd is listed as NTFS, yet my second one is RAW. Subsequently, the C: drive is also listed as RAW, and I cannot use Chkdsk.exe on it. Through a cmd prompt, I used Bootrec.exe /FixMbr and /FixBoot, but it did not seem to fix the issue. I also used Bootrec.exe /ScanOs to see if the Windows 7 installation still existed, yet it came up with nothing.I've managed to use a program called RAID Reconstructor, via a PE Builder boot disk, in order to copy all my hard drives' sectors over to my external hard drive. The external is now hooked up to a second PC that I'm using to troubleshootIt seems that all of my personal files are intact and working perfectly fine, and the file names are also correct. I don't really know how to check my Windows/System32 files for corruption.I'd like to fix Windows 7 without having to format the hard drives. Since I lack the Windows 7 installation cd, I can only install Windows XP while lacking 64-bit support. Since I'd like to avoid this, I was wondering if there was a way to get Windows 7 back up and running. But I suppose this isn't possible without getting my second hdd back to NTFS format.
View 2 Replies
View Related
Jan 9, 2013
I purchased 2 500gb hdd's for a raid 1 setup. I already have a 128gb SSD with my operating system that i plan to leave untouched. i simply want to install games onto the hard drives in raid 1.
I have an m5a99x evo motherboard by asus. My problem is that whenever i turn on the raid in bios, press control+f, and set the 2 drives in raid 1, windows 7 cannot boot. If i select the restore, i cannot access my system image from my external hard drive and it cannot solve the problem on its own.
View 2 Replies
View Related
Jul 16, 2012
I have set up a dual boot- Windows 7 pro & XP ultimate, both on separate SSD's, all OK. I also have two 3TB HDD's set up under windows 7 RAID, all OK. In XP under drive management the RAID drives show up twice, once as 775GB unused drives with no drive letter allocated and also as 2.7GB RAID drives with status 'failed', drives marked as 'missing'. Is there a way I can get the RAID drive accessible under XP?
View 8 Replies
View Related
Jun 4, 2012
My win 7 machine boots perfectly with two SATA mirrored drives and a Promise Ultra 133 TX2 IDE controller card with no drives attached. But when I connect drives to either IDE1 or IDE2, the machine will not even get to win start up.
View 1 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Jun 29, 2010
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
View 1 Replies
View Related
Feb 18, 2012
my goal is to boot windows 7 x64 with raid-1. My boot drive is a SSD, which is not part of the raid array. I have 3 seagate ST2000DM001 that I want in raid-1. I have tried installing windows 7 with ahci in bios first but no luck. I was able to boot from raid1 when I started bios out in raid but my ssd drives read/write speeds significantly decreases.
View 3 Replies
View Related
Apr 25, 2012
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
View 2 Replies
View Related
May 9, 2012
in my PC there are some drives with RAID0 arrays and from little time I have bought a SSD for Operative System (Windows 7).in your opinion (on the BIOS) is it better making the Boot with SSD or with another drive with RAID0?
View 9 Replies
View Related
Jul 8, 2011
I have a 6TB raid array consisting of 2 3TB drives. I have the latest Motherboard with EFI bios. The Intel RST utility allowed me to set up this array, and it says it is bootable. I would like this to be my C: drive.
How can I get Windows 7 to install and boot from this array.
View 21 Replies
View Related
Mar 23, 2011
I know this is probly a question asked before, but I have two 1.5tb drives I would like to set up in RAID 0. What is the largest size RAID 0 Windows 7 Home Premuim will support for a boot?
View 9 Replies
View Related
Mar 30, 2012
I7-950
HD6970
6GB corsair XMS 3 1600MHz @1066
DRIVES-
OS- 2 x corsair force 3 60gb SSD running RAID 0 on Sata 2 ports
SEPARATE to OS drives- 2 x corsair 60gb in RAID 0
1x WD 320gb
1x WD 1TB
Cooler master silent pro 850
all the drives are functioning, intel software isnt reporting any drive issues, basic drivers are up to date.
View 4 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
May 31, 2011
Running Windows 7 Ultimate x64. I have setup a partition which I transfered from on drive to another and now my boot partition is on an SSD Raid array connected to an LSI 9260 controller. If I boot the computer with the RAID Array first, the computer will just hang there. No message no nothing after the Verify DMI success message. If I setup my computer to boot from CD first and the the RAID Array second and with a bootable CD in the drive, the BIOS will display the "Press any key to boot from CD" If I don't touch anything, then windows will load just fine when the boot sequence switches to the RAID Array.
View 3 Replies
View Related
Oct 13, 2009
I just bought a refurb Dell XPS 420 w/ Q9300, running Vista Home Premium x64 and downloaded/installed an activated version of Win 7 Ult x64 on an 80GB SSD [Sata1] I bought for it; dual booted w/ Vista x64 on old hard drive [Sata0].
Windows 7 x64 was running stable and instantly fast, I wanted to enable RAID0 on the old hard drive [Sata0] and another new hard drive [Sata2]
I entered Intel Maxtrix Storage Manager (Ctrl-I), creating a RAID0 volume on [Sata0] and [Sata2].
After reboot, it says "No boot device available" after BOIS screen.
My subsequent boot attempts include (roughly in order):
1. disable RAID0 volume, boot to [Sata1]
2. disable [Sata0] and [Sata2], boot to [Sata1]
3. disable [Sata1], boot to CD/DVD-drive (Windows 7 install/boot)
4. disable CD/DVD-drive, boot to USB flash (Windows 7 install/boot)
I have done some digging around and cannot seem to find a solution. I have the use of my notebook (w/ broken DVD burner, still reads) running Windows 7 Ult x86 so apparently I cannot make my USB flash drive x64 bootable from what I've read. I also have 2-USB hard drives (80/250GB) and an eSata 2x docking station available, but no eSata on notebook.
Hope I gave enough info for someone to come up with an easy fix. If I could boot to the Windows 7 x64 install DVD that I made with the non-booting PC, I would have just done a clean install by now, but it refuses to boot to the CD/DVD drive. It actually wouldn't even boot to DVD to install Windows 7 x64 in the first place, I had to install from Vista. Also I do not have a Vista x64 install disk either.
View 2 Replies
View Related
Feb 6, 2010
After flashing the bios, my computer could not find the OS. The options displayed recommended that I try to repair the OS, so I made that selection with no joy. I went into the bios setup and found that it was no longer setup for my raid 1 drives, so reconfigured. When I did this, I missed setting the SATA 4/5 to IDE and went through the process again of trying to repair the OS. Once again, that did not work.
I went back into the bios and discovered my oversight, fixed it, but the computer still does not recognize my raid drives. The raid bios setup utility still shows a valid array. At this point, my assumption is that it doesn't recognize the array drive because the driver isn't loading, so I've tried to reload the drivers. The motherboard manual only describes how to do this when installing a new operating system and I do not want to lose my programs. Do you have any suggestions?
View 1 Replies
View Related
Mar 5, 2012
I have 2 SSDs each partitioned into 80GB and 40GB like this:
-Drive1-80GB (boot) and Drive1-40GB
-Drive2-80GB and Drive2-40GB
Drive1-80GB is already the Windows 7-64 boot partition for the system. Can I configure a software RAID-0 with Drive1-40GB and Drive2-40GB? I know this is unorthodox but I wanted to try this for a few reasons.
View 4 Replies
View Related
Jul 10, 2012
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
Jan 1, 2013
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies
View Related
Jan 5, 2012
We have a Lenovo T61 laptop and have installed Windows 7 professional edition on it few months ago. From past week or so, the system tends to not go beyond a blank screen after turning the power button on. I've tried pressing F8 and also boot up using W7 disk, but nothing works. Its a blank screen, however, the system lights like power, bluetooth, keypad lights do turn on. I am posting the question from a different computer now.
View 1 Replies
View Related
Jun 8, 2012
I was using computer normally (playing world of warcraft if that matters) and then suddenly it freeze, I couldn't do anything so I've restarted it. Then 2 options pop up, start normally and startup repair. When I choose start normally windows logo appears, then after minute out so bsod flashes and computer restarts. startup repair loads okay, blue wallpaper and cursor come up but that's all, I left my laptop for all night and nothing.Safe mode doesn't work.if that maters, I care about my laptop, its always on a desk, it doesn't overheat, I got antivirus and firewall.
View 1 Replies
View Related
Aug 15, 2011
While installing Windows 7 Pro 32 I stopped the process (not clever) after I removed and expanded 2 of 3 partitions. I wanted to have 2 partitions instead of 3[CODE]I thing after messing up with the harddrive, formating, partitioning, expanding, removing partitions, and finally stopping the installation process i f@#$ up the system
View 8 Replies
View Related
Sep 30, 2012
I'm not able to install windows 7. Been trying to install this since past 1 week. The methods I've tried are:
1. I have a windows 7 bootable DVD which doesn't boot up. (I've set BIOS to boot from DVD ROM first but it just won't boot from the DVD). Tried to install Windows 7 from the same DVD to a friend's PC and it worked. So the DVD has no issues.
2. I tried to run 'Setup.exe' from within the DVD. The two options pop-up 'Check compatibility' and 'Install now'. On clicking install now, after sometime, an error is encountered with the message 'Windows was unable to create a required installation folder' error code:0x8007000D.
I am running Windows XP Professional and there's only one user on the PC which is the Admin, so I do not know why is the setup not getting permissions. I've also uninstalled my antivirus, CD burning software, disabled firewall and disconnected all other devices, but its still the same.
3. I tried to install it from a USB device by making it bootable but that too doesn't work. (Yes the mobo supports booting from the USB).
The problem is that XP does not recognize a 'USB' device on boot. Rather it shows this USB stick as a removable 'Hard Drive'. Furthermore, i changed the order of Hard Drive boot to boot from this removable Hard Drive first, it still boots my existing OS. I want to dual boot windows 7 with my existing XP, but that would be after I manage to run the windows 7 setup in the first place.
View 1 Replies
View Related
Nov 27, 2009
I recently purchased a copy of x64 Windows 7 Business. I downloaded it from the Online store DigitalRiver as part of the students deal.
Here is my system information:
Current operating system: Windows Vista x32 Business
Processor: Intel Quad Core 2 Q6600 2.4 GHz
Memory: 4GB PC5400 DDR2 667MHz
Motherboard: Intel 975XBX2 KR Socket 775
BIOS version: 2838 (Latest)
I burned the x64 Windows 7 installation files onto a DVD. I am aware that it is not going to run from my current OS since it is x32.
My Boot order is the following: DVD/CD ROM -> HDD
I tried to boot with the x64 Windows 7 DVD but it simply didn't. So I decided to format my computer using the x32 Vista DVD.
After the format, I tried to boot with the x64 Windows 7 DVD and it failed again.
So I re-installed x32 Vista and I still cannot boot with the x64 Windows 7 DVD.
View 3 Replies
View Related
Jul 3, 2011
The windows7 cd doesn't boots properly, i mean the first process of windows loading files is good and then starting windows, but then its just the backgroung of windows7 and no installation window pops up.I burned the image using ultra iso at 4x speed.I had a different CD and used that too but same prob appers again.But the problem doesn't ends there, now when i thought to install other cdburning software i get this "Windows cannot access the specified device,path, or file. You may not have appropriate permission to access the item."and its not that, anything i try to install, gives me this problem.Have this problem occured due to previous failure attempts to install windows7,although tecnically the installation never started.
View 4 Replies
View Related
Aug 1, 2012
i installed a bad windows 7 which do not run, i need to unistall windows 7 to install windows xp. but icant get to the start menu before it stops working.
View 1 Replies
View Related
