Very Peculiar System Hangs When Lid Is Closed
Nov 27, 2011
Recently, with no system changes, suspicious downloads, or drops in recent history, my 6 Month old Clevo build began exhibiting two very bizarre symptoms:
1) Upon booting, Windows will start normally ,up until the mouse is rendered before the log in screen appears, then the system seems to power down. However, upon pressing the power button, the computer resumes booting right from where it left off as if it had entered a very rapid hibernation mode.
2) When the lid is closed during normal use, even when the system is not set to sleep or hibernate upon a lid closing, the system will hang permanently, with indicator lights like caps lock getting stuck either on or off and the hard drive light not turning on. This requires a hard reset to fix.
I have scanned memory, boot sectors, and the entire hard drive for malicious programs like worms, packers, and rootkits with Avast and Kapersky boot time scans to no avail.The system behaves normally otherwise, except during boot or lid closing. No overheating, screen flashing, or abnormal system processes are occurring. Though I have not yet checked the exact temps or checked the contents of rundll.I have a hunch it is the motherboard, but I don't have the screwdrivers to check or try to reset the SODIMMS.I have found a few questionable errors in the event log, but no strange processes in system resource manager.This is transcript of said questionable error log with all events from past 7 days (as of 11/27/2011) (with said issue arising on the 25th)The Download is 215 Kb compressed and 5 Mb uncompressed with over 7,000 events.On an unrelated note, the event log reports the processor getting underpowered, is this just a momentary thing during bootup or something that could hinder performance?
View 4 Replies
ADVERTISEMENT
Oct 3, 2012
I am using windows 7 ultimate. Whenever I open any folder in my hard drive, my computer gets hang and is closed by itself. It shows windows explorer has stopped working.. so restart it. I have already formatted my D and E drive . But problem still persist.
View 1 Replies
View Related
Jan 4, 2011
My laptop has a button which used to trigger software (Acer PowerSmart Manager) which was supposed to reduce power consumption through undisclosed methods. The program was an irritation since it overrode screen brightness settings (actually making the screen brighter than I wanted it) and could not be customised so I uninstalled it. I would like to reasign the button to opening a program called GameBooster which I can use to close down many programs at once and restart them all again at a suitable time. The problem is that I don't know a) how to find out the scan code of this peculiar key (I think it might actually simulate two or more regular keys being pressed at the same time) nor b) how to make this trigger the execution of the GameBooster program (preferably without running an additional application). Surely Windows 7 has the capacity do this built in?
View 2 Replies
View Related
Nov 17, 2010
I am currently having difficulty with rocketdock. Before you think "this doesn't belong on this forum", let me explain what I am trying to do, and then what I need to know.I am trying to find a way to make it so that if I have a window that is "closed/minimized" to the system tray (because I use taskbar hider, I need to), I am able to see them on rocketdock and actually use the "right-click" options (because if I try to right-click the icon for a shortcut, for example steam, it just brings up the rocketdock options instead.So what I need, although I'm not sure if it will work, is to know if there is a folder location for the "system tray", or if you know a different method that could allow me to do what I mentioned above.
View 9 Replies
View Related
Jan 13, 2013
Systems hangs after seemingly OK boot. Logged in as user but no desktop icons. Rebooted in Safe Mode - seemed OK.Looked @ Event Log. Errors
[code]...
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Dnscache serviceRestarted in Normal Mode. Booted fine and logged in OK. Still get the 7003 errors but system works OK.Has only recently started to happen but I have had to remove a Trojan Virus. All virus checking is OK but I suspect something got damaged.
View 2 Replies
View Related
Aug 21, 2010
I had a copy of windows on my computer for about 3 months (non legit key) and with being happy with the O/S i decieded to go out and buy a copy and do a fresh install.Since installing, my 200gb HDD will no longer boot past BIOS post. I dropped it from the system and left my other 300gb HDD in and installed it to the HDD no worries, boots up fine and can use win 7. I then did a software update and now it gets stuck on the windows startup screen....
View 3 Replies
View Related
Apr 3, 2011
my system hangs without any message i have to disconnect the power to shutdown
View 2 Replies
View Related
May 5, 2009
I have the official RC1. I checked the MD5 sum and it came out fine (for once). I did not burn the DVD at max speed so I could avoid write errors. However, I have tried to boot from the DVD on 3 computers and cant get past the "Press any key to boot from CD" prompt. the weird thing is, all 3 computers display "Press any key to boot from CD o"
I press a key and nothing happens. Why is that little "o" appearing at the end?
View 2 Replies
View Related
Mar 15, 2011
I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.
View 3 Replies
View Related
Dec 6, 2009
I am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
View 1 Replies
View Related
Oct 14, 2012
im having an issue frequently with my hp pavilion dv6 laptop.the thing is the cursor starts to freeze and becomes so slow which leads to a system crash.the system begins to hang/cursor freezes,at the same time i can hear the cpu fan sound high.and wen i restart it,it works fine for some sessions.c
View 1 Replies
View Related
Sep 7, 2012
Tried to reinstall system 7 from the 3 disk backup and it hangs at 83%.
View 3 Replies
View Related
Sep 10, 2012
I have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
View 1 Replies
View Related
May 20, 2012
I was having this problem earlier too, but i reinstalled windows 7 and now it was fine till i today used windows update to install service pack one. Now im getting hangs again.
No BSOD's have been seen yet, but its hanging up yeah(Screen freezes, keyboard lights go out and voice outputs a big 'ZZZZZZZZ' ) I cant provide much more detail
View 5 Replies
View Related
Jul 29, 2012
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
View 9 Replies
View Related
Jan 6, 2010
I'm doing a clean install of 7 ultimate x64, I've got another hd with the rc installed that has been running for a while so I know the hardware works under 7.
If I boot the new install with my 5 port usb pcix card, it detects a "pci-to-pci bridge" starts to install drivers, and then the whole system hangs. I've tried taking everything else out, no joy.
Any suggestions on how to get this device installed?
SYBA PCI-Express USB 2.0 5 Ports Controller Card Model SD-PEX-NEC5U - Add-On Cards
View 1 Replies
View Related
Apr 5, 2011
why system hangs when i try to upload any file to any site eg. i m trying to upload a photo in Facebook, my system hanged uo and no mouse, keyboard or Alt+Ctrl+ Del is working 1st time when this happens i wait for around half and hour and press the power Switch to shutdown.when i tried again the same problem happens, i tried in other sites also in Naukri.com, Monster.com in Orkut.com with JPEG, Doc and Pdf files.
View 1 Replies
View Related
Oct 10, 2011
I have just built a new system consistsing of the following:
Asus M5A78L/USB3 AMD Socket AM3
Kingston 8GB (2x4GB) DDR3 1333MHz i5 Memory Kit Non-ECC CL9
AMD Phenom II X2 555 Black Edition 3.2GHz Socket AM3 6MB Cache
Western Digital WD20EARS 2TB Hard Drive SATAII 64MB Cache - OEM Caviar Green
Powercool 550W 80plus Certified Efficienty PSU - 1x PCI-E 4x SATA
Arctic Cooling Freezer 7 Pro rev 2 Socket 775, 1156, 1155, 1366, AM2, AM3 Heatpipe CPU Cooler
Windows 7 Home Premium 64-Bit SP1
The initial build of the system went as planned until I activated the CPU overclocker on the ASUS motherboard. When this is on the system seems to boot ok and starts to load windows but then hangs and all I get is a blank black screen.I have had to reboot and reset the motherboard to the default values to get it to work ok.
View 1 Replies
View Related
Jul 25, 2012
I've a problem that the Downloads folder on my system is opening very slow and at times it makes the system to freeze. This happens only when I try to access the contents of that folder. I've tried the following till now and havn't yet solved this problem.Scanned for viruses or spywares in the system. Used MBAM and TDSSKiller. No infections.Switched the View of that folder from Large Icons to Detail or List View.Customized the folder for "General" items. Right click on folder->Properties->Customize tab->Optimize this folder for General ItemsDefragmented the folder using Piriform Defraggler.So anyone knows what's going wrong with my system.
View 1 Replies
View Related
Feb 26, 2012
I recently had a really annoying virus which would not go away, after 7 days of fighting with it I decided the best course of action would be to format and reinstall win 7. However now my PC is super slow, I cannot open desktop items, without right clicking and selecting "Run as Admin" and even that is really slow. If I right click and select "Personalize" it hangs for ages then says "Server Execution Failed".
View 7 Replies
View Related
Sep 18, 2011
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
View 1 Replies
View Related
Dec 14, 2010
Dell inspiron 580 with core i5-760 @ 2.8ghz and 4gb DDR3 RAM, windows 7 home premium an nvidia geforce 310. My system gets hang at windows logo while starting, while system is shutting down. Have nayone come across about this problem earlier. Is the nvidia Graphic card causing the problem? I have even restored my PC by the problem still the same.
View 6 Replies
View Related
Mar 24, 2011
There were a couple of somewhat similar threads when I searched, but they were all both old and mostly for fresh installs or upgrades. My computer has been running 7 for a year now so I am not hanging on installation but on boot.
I am running Windows 7 64 bit I think it is Professional.
Upon boot, the computer proceeds to the startup splash with the windows logo in it's glorious pulsing colors and stays there. I have had a hang on this screen before that was fixed using a system restore, but that previous time, the splash screen actually froze. This time, no matter how long I sit it there, the colors continue to pulse.
I have attempted to repair (after entering the boot menu using f8) as well as running in safe mode and even booting the last known good configuration. the repair will go through the loading screen, then the second load with the side scrolling green bars and then load into a black screen with a mouse cursor that does not respond to commands. Safe mode gets stuck at /classpnp.sys and does not continue. Last known good configuration borks the same way that loading normally does.
I actually restarted my computer because chrome crashed and the computer hung on attempting to start the task manager. I had no other symptoms other than this crash.
My CPU temp in the BIOS is shown as 47 C. My build is a home-build consisting of:
MSI K9A2 CF
HD Radeon 4850
Phenom X3 (not Phenom II X3)
2x2 gig ddr2 sdram mushkin
Corsair TX 750w
samsung HDD (OS installed)
A WD HDD
View 4 Replies
View Related
Jun 8, 2012
recently I've noticed that when I close my laptop that it won't go to sleep so when I went to change the "when lid closed" options in my power settings they wern't there. I also checked in the power button settings to the side.
View 8 Replies
View Related
Aug 28, 2010
Just wanna know if this will limit my speed. Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
View 1 Replies
View Related
Dec 18, 2011
I've been getting the BSOD for a few days now, this happens only when the laptop lid is closed. I have set the option "choose what closing the lid does" to "do nothing". this is because i have the broadband ON and I'm usually downloading stuff. When i open the lid I see a box that says "windows has recovered from an unexpected error" and the problem event name has "blue screen"
View 1 Replies
View Related
Aug 6, 2010
where is that green tick?
View 3 Replies
View Related
Aug 23, 2011
I have a laptop, Sony Vaio, which have the power button on the right side, not over the keyboard like some other models. So I would like to turn on the laptop by pushing the power button anytime - even when the lid is closed. But this is not the case, I can only turn on the laptop when i open the lid. I have connected my laptop to TV (as dock, via HDMI port) to look at movies. I have changed the power settings to do nothing when i closing the lid. Which works fine, but I still need to open a lid, turn on, and close the lid again! I think it should be an easy way to solve this problem. So i want to know is there any way to turn on windows when the lid is closed?
View 9 Replies
View Related
Sep 8, 2011
I wanted to have an external remote power button on my netbook, therefore I opened it and managed to put 2 wires from the button inside. The external button works, but one big problem remains:I cannot power UP the netbook when the lid is closed, even if I press the external remote power button?Instead, when lid is opened, the remote button works perfectly!
View 7 Replies
View Related
Apr 11, 2011
I have a standard PC => Router => Internet (Modem) connection at the moment and I didn't notice until just now but every single port on my machine forces itself closed. I know the issue is not with my ISP as they don't block any ports, I have had ports opened before, and as of noticing this issue opening ports works on my other PCs. After testing the router is also functioning perfectly and is not at issue with port forwarding.I do not run any type of anti-virus software and I also do not run any third party firewall software. Windows Firewall has been tried as both enabled and disabled (though they give different results). When connected to the internet through my router the opened ports appear as stealthed like all of the non-forwarded ports when windows firewall is enabled with proper rules and as closed when windows firewall is disabled. When connected directly through to my internet the ports all show as closed.
View 3 Replies
View Related
Sep 16, 2011
When i shutdown the pc, the message say that "explorer.exe" need to close, but I have not opened it.
View 3 Replies
View Related