I'm doing a clean install of 7 ultimate x64, I've got another hd with the rc installed that has been running for a while so I know the hardware works under 7.
If I boot the new install with my 5 port usb pcix card, it detects a "pci-to-pci bridge" starts to install drivers, and then the whole system hangs. I've tried taking everything else out, no joy.
Any suggestions on how to get this device installed?
SYBA PCI-Express USB 2.0 5 Ports Controller Card Model SD-PEX-NEC5U - Add-On Cards
I have installed sony vegas pro 11 and been working for some time. Recently I have added ASUS 210Silent ( GE Force Physx HDMI) 1 GB DDR3 Graphics card. All went well for one month. Now, whenever I try to import video clips into vegas pro 11, I am unable to import the clips. The vegas pro hangs up and I get the following message every time."Windows has detected your computer's performance is slow. This could be because there are not enough sourcesto run the windows Aero colour scheme. To improve performance, try changing the color scheme to Windows 7 Basic"Not only vegas pro, but the entire system hangs up including internet.The following is my PC configuration OS Windows 7 Ultimate 32 bits OS Pentium (R) Dual core CPU E 5400 @ 2.70 GHZ Ram 2.00 GB No Pen or Touch input for the display Hard disc Nearly 466 GB System Rating 4.3 Windows Experience Index
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors.
There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
Well ive heard that Ivy bridge boost 20% performance and huge in GPU.I dont need Built in GPU.Ivy has integrated USB3.0, PCI 3.0 and thunderbird.Is it really worth to wait for the new Ivy Bridge i5 3570k? versus i5 2500k?I have a lesson for the previous CPU. Bought 3 computer Socket 1156 after 2 months of release!The result? i always got a BSOD.The Sandy bridge 1st release has a problem also with the chipset.If i remember they fix after 2 weeks with the new B3 design.Now guys because im really excited on Ivy bridge.The release date is April 08, 2012 What can you say? is it really safe buying for only a 1 month old after the release? Lets say i wait to buy on May 01, 2012?.Amd is creating a PCI 3.0 Hd 7 Series.
Windows 7 home premium 32bit zonealarm basic firewall wlancard dell 1450 usb
Info: the card never had a vista or windows 7 driver. A computer skilled took out a folder from the windows xp installer. Through device manager the folder is installed as driver, and the wlan card works. I wanted to use ubuntu 'remote terminal server'.Connected via pc to pc lan cross over cable. Maybe the connection succeded because ping test was ok. But never made the program 'remote terminal server' work. At a point zonealarm made trouble, allthough disabled. Shutting down computer worked. Error: Next time I turned on the computer, wlan didn't work. The wlan card makes the connection but there is a yellow triangle on the wifi icon in taskbar. Under network it keeps hanging, messaging 'identifying'.I tried this: Reinstalling zonealarm basic. Reinstalling wlan card folder driver. Didn't work.
Systems hangs after seemingly OK boot. Logged in as user but no desktop icons. Rebooted in Safe Mode - seemed OK.Looked @ Event Log. Errors
[code]...
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Dnscache serviceRestarted in Normal Mode. Booted fine and logged in OK. Still get the 7003 errors but system works OK.Has only recently started to happen but I have had to remove a Trojan Virus. All virus checking is OK but I suspect something got damaged.
I had a copy of windows on my computer for about 3 months (non legit key) and with being happy with the O/S i decieded to go out and buy a copy and do a fresh install.Since installing, my 200gb HDD will no longer boot past BIOS post. I dropped it from the system and left my other 300gb HDD in and installed it to the HDD no worries, boots up fine and can use win 7. I then did a software update and now it gets stuck on the windows startup screen....
I have the official RC1. I checked the MD5 sum and it came out fine (for once). I did not burn the DVD at max speed so I could avoid write errors. However, I have tried to boot from the DVD on 3 computers and cant get past the "Press any key to boot from CD" prompt. the weird thing is, all 3 computers display "Press any key to boot from CD o"
I press a key and nothing happens. Why is that little "o" appearing at the end?
Recently, with no system changes, suspicious downloads, or drops in recent history, my 6 Month old Clevo build began exhibiting two very bizarre symptoms:
1) Upon booting, Windows will start normally ,up until the mouse is rendered before the log in screen appears, then the system seems to power down. However, upon pressing the power button, the computer resumes booting right from where it left off as if it had entered a very rapid hibernation mode.
2) When the lid is closed during normal use, even when the system is not set to sleep or hibernate upon a lid closing, the system will hang permanently, with indicator lights like caps lock getting stuck either on or off and the hard drive light not turning on. This requires a hard reset to fix.
I have scanned memory, boot sectors, and the entire hard drive for malicious programs like worms, packers, and rootkits with Avast and Kapersky boot time scans to no avail.The system behaves normally otherwise, except during boot or lid closing. No overheating, screen flashing, or abnormal system processes are occurring. Though I have not yet checked the exact temps or checked the contents of rundll.I have a hunch it is the motherboard, but I don't have the screwdrivers to check or try to reset the SODIMMS.I have found a few questionable errors in the event log, but no strange processes in system resource manager.This is transcript of said questionable error log with all events from past 7 days (as of 11/27/2011) (with said issue arising on the 25th)The Download is 215 Kb compressed and 5 Mb uncompressed with over 7,000 events.On an unrelated note, the event log reports the processor getting underpowered, is this just a momentary thing during bootup or something that could hinder performance?
I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.
I am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
im having an issue frequently with my hp pavilion dv6 laptop.the thing is the cursor starts to freeze and becomes so slow which leads to a system crash.the system begins to hang/cursor freezes,at the same time i can hear the cpu fan sound high.and wen i restart it,it works fine for some sessions.c
I was having this problem earlier too, but i reinstalled windows 7 and now it was fine till i today used windows update to install service pack one. Now im getting hangs again.
No BSOD's have been seen yet, but its hanging up yeah(Screen freezes, keyboard lights go out and voice outputs a big 'ZZZZZZZZ' ) I cant provide much more detail
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
why system hangs when i try to upload any file to any site eg. i m trying to upload a photo in Facebook, my system hanged uo and no mouse, keyboard or Alt+Ctrl+ Del is working 1st time when this happens i wait for around half and hour and press the power Switch to shutdown.when i tried again the same problem happens, i tried in other sites also in Naukri.com, Monster.com in Orkut.com with JPEG, Doc and Pdf files.
I have just built a new system consistsing of the following:
Asus M5A78L/USB3 AMD Socket AM3 Kingston 8GB (2x4GB) DDR3 1333MHz i5 Memory Kit Non-ECC CL9 AMD Phenom II X2 555 Black Edition 3.2GHz Socket AM3 6MB Cache Western Digital WD20EARS 2TB Hard Drive SATAII 64MB Cache - OEM Caviar Green Powercool 550W 80plus Certified Efficienty PSU - 1x PCI-E 4x SATA Arctic Cooling Freezer 7 Pro rev 2 Socket 775, 1156, 1155, 1366, AM2, AM3 Heatpipe CPU Cooler Windows 7 Home Premium 64-Bit SP1
The initial build of the system went as planned until I activated the CPU overclocker on the ASUS motherboard. When this is on the system seems to boot ok and starts to load windows but then hangs and all I get is a blank black screen.I have had to reboot and reset the motherboard to the default values to get it to work ok.
I've a problem that the Downloads folder on my system is opening very slow and at times it makes the system to freeze. This happens only when I try to access the contents of that folder. I've tried the following till now and havn't yet solved this problem.Scanned for viruses or spywares in the system. Used MBAM and TDSSKiller. No infections.Switched the View of that folder from Large Icons to Detail or List View.Customized the folder for "General" items. Right click on folder->Properties->Customize tab->Optimize this folder for General ItemsDefragmented the folder using Piriform Defraggler.So anyone knows what's going wrong with my system.
I recently had a really annoying virus which would not go away, after 7 days of fighting with it I decided the best course of action would be to format and reinstall win 7. However now my PC is super slow, I cannot open desktop items, without right clicking and selecting "Run as Admin" and even that is really slow. If I right click and select "Personalize" it hangs for ages then says "Server Execution Failed".
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
Dell inspiron 580 with core i5-760 @ 2.8ghz and 4gb DDR3 RAM, windows 7 home premium an nvidia geforce 310. My system gets hang at windows logo while starting, while system is shutting down. Have nayone come across about this problem earlier. Is the nvidia Graphic card causing the problem? I have even restored my PC by the problem still the same.
i just installed PC Lin-Q (USB 2 High Speed Bridge Cable) between tow of my Desktop Computers #1 Windows 7 RC1 and #2 Windows XP Pro SP3, installed to Windows 7 RC1 as Windows XP SP3 compat and it works fine !
I was fixing my other laptop and I wiped my external HDD thinking it was the laptop's HDD by mistake. I cleaned it via CMD(SELECT DISK 1, CLEAN) Any ideas to make it back to normal?
i have just built a new rig and i'm having a couple of problems. as i said in the title i have a msi 560 on a asus p67 mobo with a intel i5 2500.i've had the computer for about 2 months now and a few days ago, when i started the computer, a message saying "disk read error, push ctrl + alt + delete" came up. i restarted my comp' a few times and it eventually booted. then today the same message came up and i went through the same process and i got the computer to boot again.this i could deal with however, my computer now has been on for about 16 hours (no big deal) but now it wont play Internet videos and huge artifacts and random triangles and things com up in games like battlefield bc2. the reason i put the time up here is that when i first started the computer it was doing video things fine.
I've been having some BSOD probs, so I'm currently updating all of my drivers. The only one I can't find an update for is called PCI Standard Host CPU Bridge. Could you point me in the right direction, so I can get the update?
Also, for some reason, PCI Standard Host CPU Bridge is listed twice in Device Manager... and both entries seem identical. Would this mean I have to update both?
Some spec info:
Dell Inspiron 1764 Laptop 64 Bit Windows 7 Home Premium (SP1) Intel Core i5 2.27 GHz Motherboard: Dell 0TKV96 4 GB RAM
I use a network bridge between my wireless and wired adapters to put my 360 on Live, because the 360 Wireless Network Adapter is just waaaay too expensive. Anyway, it all worked completely fine under XP, but I just installed 7 and there's a couple of things I'm having trouble with... The network icon in the sytem tray shows either... well, I'm not sure exactly what icon it is when the 360 is on, or a disconnected wireless network icon when it isn't...
what I'd like is the normal wireless network icon with the signal bars (this is more of an annoyance, but I get really annoyed by stuff like this). More seriously, under (as far as I can tell) the same configuration as XP, the 360 can't get an IP address from my router.
If I set it to a static IP, it connects to Live, but complains about "moderate NAT" or some crap, and says that will stop me connecting to some games or players (and it does).
I'm using a bridged connection so that my ps3 can connect through my computer (better speed then with ps3s wireless), but I have a small problem.
the ps3 can connect to the internet and everything seems to work fine, but after 10 min of gaming I will get a network error saying that I'm not connected to the internet.
After repairing it'll work again. Any idea whats wrong and how to fix it?
i normal run windows xp on my machine but currently trying out windows 7 but i have a small problem. ok so in xp i create a network bridge with my wireless card and ethernet so that i can connect my xbox 360 to the internet without buying the wireless adapter. now when i try to do this in windows 7 i get an error that says. To create a Network Bridge, you must select atleat two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing. im useing a lan connection and a high speed wireless connection isnt that all i need....and if it's because of intnert connection sharing how do i turn that off in windows
I have two network adpatro in win 7 one is lan card network adpator that use ip 10.1.4.100/16 Gw 10.1.1.249 one is VPN network adpator .If it enable , the IP will ber 192.168.2.X /24 .
I want to make bridge and so , the computer from 10.1.4.XXX /16 can use my computer to reach the 19.1.68.2.x . In this case , my PC work as a router .
I try to make bridge with above two adaptor . But after enable the bridge, I still cannot ping ,telnet 192.168.2.XXX from 10.1.4.xxx PC even after setup the route table .
my wireless USB network adapter crapped out on me recently, so I'm trying to run internet through my wireless laptop to my PC using a network bridge but for some reason the internet speed wont stay high. its starts out good and then gets really slow. both laptop and pc are running windows 7 enterprise. keep the internet running at a steady pace?
